[ 1.961231] io scheduler cfq registered
[ 1.961619] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.961655] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.963005] ACPI: AC Adapter [ACAD] (on-line)
[ 1.963227] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.963235] ACPI: Power Button [PWRB]
[ 1.963320] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.963326] ACPI: Sleep Button [SLPB]
[ 1.963403] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 1.964204] ACPI: Lid Switch [LID]
[ 1.964282] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.964287] ACPI: Power Button [PWRF]
[ 1.964497] ACPI: acpi_idle registered with cpuidle
[ 2.006415] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20120320/nspredef-463)
[ 2.006430] ACPI: [Package] has zero elements (f74d38e0)
[ 2.006433] ACPI: Invalid passive threshold
[ 2.006444] ACPI: Invalid active0 threshold
[ 2.008114] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.008122] ACPI: Thermal Zone [THRM] (42 C)
[ 2.008183] ACPI: Battery Slot [BAT1] (battery present)
[ 2.008230] GHES: HEST is not enabled!
[ 2.008447] isapnp: Scanning for PnP cards...
[ 2.012389] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.014415] Linux agpgart interface v0.103
[ 2.016621] brd: module loaded
[ 2.017703] loop: module loaded
[ 2.017889] ahci 0000:00:11.0: version 3.0
[ 2.018073] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.018079] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.019216] scsi0 : ahci
[ 2.019346] scsi1 : ahci
[ 2.019443] scsi2 : ahci
[ 2.019537] scsi3 : ahci
[ 2.019613] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
[ 2.019618] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
[ 2.019622] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
[ 2.019626] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
[ 2.020341] Fixed MDIO Bus: probed
[ 2.020423] tun: Universal TUN/TAP device driver, 1.6
[ 2.020426] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
[ 2.020544] PPP generic driver version 2.4.2
[ 2.020619] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.020684] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.020695] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.020707] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.020733] QUIRK: Enable AMD PLL fix
[ 2.020751] ehci_hcd 0000:00:12.2: debug port 1
[ 2.020789] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb09000
[ 2.032310] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.032361] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.032365] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.032370] usb usb1: Product: EHCI Host Controller
[ 2.032374] usb usb1: Manufacturer: Linux 3.5.0-19-generic ehci_hcd
[ 2.032378] usb usb1: SerialNumber: 0000:00:12.2
[ 2.032633] hub 1-0:1.0: USB hub found
[ 2.032641] hub 1-0:1.0: 5 ports detected
[ 2.032797] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.032808] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.032819] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.032860] ehci_hcd 0000:00:13.2: debug port 1
[ 2.032883] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb07000
[ 2.044291] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.044342] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.044346] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.044351] usb usb2: Product: EHCI Host Controller
[ 2.044355] usb usb2: Manufacturer: Linux 3.5.0-19-generic ehci_hcd
[ 2.044359] usb usb2: SerialNumber: 0000:00:13.2
[ 2.044584] hub 2-0:1.0: USB hub found
[ 2.044593] hub 2-0:1.0: 5 ports detected
[ 2.044767] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 2.044778] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.044788] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.044823] ehci_hcd 0000:00:16.2: debug port 1
[ 2.044846] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000
[ 2.056272] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.056323] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.056328] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.056332] usb usb3: Product: EHCI Host Controller
[ 2.056336] usb usb3: Manufacturer: Linux 3.5.0-19-generic ehci_hcd
[ 2.056340] usb usb3: SerialNumber: 0000:00:16.2
[ 2.056547] hub 3-0:1.0: USB hub found
[ 2.056556] hub 3-0:1.0: 4 ports detected
[ 2.056682] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.056754] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.056765] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 2.056810] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000
[ 2.116208] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.116216] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.116221] usb usb4: Product: OHCI Host Controller
[ 2.116225] usb usb4: Manufacturer: Linux 3.5.0-19-generic ohci_hcd
[ 2.116229] usb usb4: SerialNumber: 0000:00:12.0
[ 2.116480] hub 4-0:1.0: USB hub found
[ 2.116491] hub 4-0:1.0: 5 ports detected
[ 2.116635] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.116646] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.116675] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb08000
[ 2.176117] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.176126] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.176131] usb usb5: Product: OHCI Host Controller
[ 2.176135] usb usb5: Manufacturer: Linux 3.5.0-19-generic ohci_hcd
[ 2.176139] usb usb5: SerialNumber: 0000:00:13.0
[ 2.176354] hub 5-0:1.0: USB hub found
[ 2.176365] hub 5-0:1.0: 5 ports detected
[ 2.176517] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.176527] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 2.176557] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000
[ 2.188745] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 2.188808] ACPI: Battery Slot [BAT1] (battery present)
[ 2.236082] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.236091] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.236095] usb usb6: Product: OHCI Host Controller
[ 2.236100] usb usb6: Manufacturer: Linux 3.5.0-19-generic ohci_hcd
[ 2.236103] usb usb6: SerialNumber: 0000:00:14.5
[ 2.236314] hub 6-0:1.0: USB hub found
[ 2.236324] hub 6-0:1.0: 2 ports detected
[ 2.236467] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 2.236478] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.236507] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000
[ 2.295953] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.295962] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.295967] usb usb7: Product: OHCI Host Controller
[ 2.295971] usb usb7: Manufacturer: Linux 3.5.0-19-generic ohci_hcd
[ 2.295975] usb usb7: SerialNumber: 0000:00:16.0
[ 2.296189] hub 7-0:1.0: USB hub found
[ 2.296200] hub 7-0:1.0: 4 ports detected
[ 2.296319] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.296457] usbcore: registered new interface driver libusual
[ 2.296531] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.311611] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.311621] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.311816] mousedev: PS/2 mouse device common for all mice
[ 2.312082] rtc_cmos 00:04: RTC can wake from S4
[ 2.312228] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.312258] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.312357] device-mapper: uevent: version 1.0.3
[ 2.312453] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-devel@redhat.com
[ 2.312499] EISA: Probing bus 0 at eisa.0
[ 2.312503] EISA: Cannot allocate resource for mainboard
[ 2.312506] Cannot allocate resource for EISA slot 1
[ 2.312508] Cannot allocate resource for EISA slot 2
[ 2.312510] Cannot allocate resource for EISA slot 3
[ 2.312512] Cannot allocate resource for EISA slot 4
[ 2.312515] Cannot allocate resource for EISA slot 5
[ 2.312517] Cannot allocate resource for EISA slot 6
[ 2.312519] Cannot allocate resource for EISA slot 7
[ 2.312521] Cannot allocate resource for EISA slot 8
[ 2.312524] EISA: Detected 0 cards.
[ 2.312584] cpuidle: using governor ladder
[ 2.312648] cpuidle: using governor menu
[ 2.312651] EFI Variables Facility v0.08 2004-May-17
[ 2.312984] ashmem: initialized
[ 2.313163] TCP: cubic registered
[ 2.313325] NET: Registered protocol family 10
[ 2.313600] NET: Registered protocol family 17
[ 2.313617] Key type dns_resolver registered
[ 2.313701] Using IPI No-Shortcut mode
[ 2.313831] PM: Hibernation image not present or could not be loaded.
[ 2.313853] registered taskstats version 1
[ 2.318260] Key type trusted registered
[ 2.322119] Key type encrypted registered
[ 2.324734] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.329136] Magic number: 4:364:317
[ 2.329195] tty tty42: hash matches
[ 2.329246] reg-dummy reg-dummy: hash matches
[ 2.329291] rtc_cmos 00:04: setting system clock to 2012-11-19 06:20:12 UTC (1353306012)
[ 2.329372] powernow-k8: Found 1 AMD E-450 APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00)
[ 2.329432] powernow-k8: 0 : pstate 0 (1650 MHz)
[ 2.329435] powernow-k8: 1 : pstate 1 (1320 MHz)
[ 2.329438] powernow-k8: 2 : pstate 2 (825 MHz)
[ 2.343865] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[ 2.343935] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.343981] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.362165] isapnp: No Plug & Play device found
[ 2.362232] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.362234] EDD information not available.
[ 2.515762] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.515817] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.518662] ata2.00: ATAPI: HL-DT-STDVDRAM GT34N, AS00, max UDMA/100
[ 2.521612] ata2.00: configured for UDMA/100
[ 2.568980] ata1.00: ATA-8: ST9500325AS, 0003SDM1, max UDMA/133
[ 2.568995] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.571586] ata1.00: configured for UDMA/133
[ 2.572054] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0003 PQ: 0 ANSI: 5
[ 2.572302] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.572354] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.572391] sd 0:0:0:0: [sda] Write Protect is off
[ 2.572397] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.572434] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.607225] usb 1-3: New USB device found, idVendor=058f, idProduct=a016
[ 2.607240] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 2.607249] usb 1-3: Product: ASUS USB2.0 WebCam
[ 2.607256] usb 1-3: Manufacturer: 04081-00050100C41AL0D84
[ 2.628811] sda: sda1 sda2 < sda5 >
[ 2.630113] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.632915] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT34N AS00 PQ: 0 ANSI: 5
[ 2.637107] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.637115] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.637538] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.637688] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.638156] Freeing unused kernel memory: 756k freed
[ 2.638681] Write protecting the kernel text: 5964k
[ 2.638716] Write protecting the kernel read-only data: 2424k
[ 2.638719] NX-protecting the kernel data: 4276k
[ 2.673140] udevd[96]: starting version 175
[ 2.836157] scsi4 : pata_atiixp
[ 2.839086] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[ 2.839703] scsi5 : pata_atiixp
[ 2.842196] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 2.842204] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 2.848424] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.848603] r8169 0000:03:00.0: irq 40 for MSI/MSI-X
[ 2.848895] r8169 0000:03:00.0: eth0: RTL8168evl/8111evl at 0xf841c000, 54:04:a6:71:6c:99, XID 0c900800 IRQ 40
[ 2.848901] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.918966] Refined TSC clocksource calibration: 1646.497 MHz.
[ 2.918986] Switching to clocksource tsc
[ 2.983901] usb 1-5: New USB device found, idVendor=0bda, idProduct=0138
[ 2.983916] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.983925] usb 1-5: Product: USB2.0-CRW
[ 2.983933] usb 1-5: Manufacturer: Generic
[ 2.983940] usb 1-5: SerialNumber: 20090516388200000
[ 2.993452] Initializing USB Mass Storage driver...
[ 2.993583] usbcore: registered new interface driver usb-storage
[ 2.993586] USB Mass Storage support registered.
[ 2.994502] usbcore: registered new interface driver uas
[ 3.044469] scsi6 : usb-storage 1-5:1.0
[ 3.044656] usbcore: registered new interface driver ums-realtek
[ 3.418224] usb 5-1: new low-speed USB device number 2 using ohci_hcd
[ 3.588079] usb 5-1: New USB device found, idVendor=046d, idProduct=c03e
[ 3.588094] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.588103] usb 5-1: Product: USB-PS/2 Optical Mouse
[ 3.588111] usb 5-1: Manufacturer: Logitech
[ 3.600239] usbcore: registered new interface driver usbhid
[ 3.600246] usbhid: USB HID core driver
[ 3.604596] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input5
[ 3.604858] hid-generic 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1/input0
[ 3.853622] usb 5-2: new full-speed USB device number 3 using ohci_hcd
[ 3.928759] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 3.928767] EXT4-fs (sda1): write access will be enabled during recovery
[ 4.094330] usb 5-2: New USB device found, idVendor=0b0c, idProduct=003f
[ 4.094345] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.094354] usb 5-2: Product: Handelsbanken card reader
[ 4.094362] usb 5-2: Manufacturer: Todos Data System AB
[ 4.364810] usb 4-4: new full-speed USB device number 2 using ohci_hcd
[ 4.525692] usb 4-4: New USB device found, idVendor=13d3, idProduct=3304
[ 4.525707] usb 4-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.652474] usb 1-5: USB disconnect, device number 4
[ 9.254659] EXT4-fs (sda1): recovery complete
[ 9.261351] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 31.557439] Adding 4171772k swap on /dev/sda5. Priority:-1 extents:1 across:4171772k
[ 31.570685] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.599279] udevd[350]: starting version 175
[ 31.695138] lp: driver loaded but no devices found
[ 31.703040] Linux video capture interface: v2.00
[ 31.708720] bttv: driver version 0.9.19 loaded
[ 31.708729] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 31.765242] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 31.807079] acpi device:27: registered as cooling_device2
[ 31.807143] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 31.807290] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:25/LNXVIDEO:01/input/input6
[ 31.909075] wmi: Mapper loaded
[ 31.960941] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 31.960951] Disabling lock debugging due to kernel taint
[ 31.987375] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 32.052917] [fglrx] Maximum main memory to use for locked dma buffers: 3852 MBytes.
[ 32.053373] [fglrx] vendor: 1002 device: 6760 count: 1
[ 32.054019] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 32.054292] [fglrx] Kernel PAT support is enabled
[ 32.054328] [fglrx] module loaded - fglrx 9.0.2 [Sep 20 2012] with 1 minors
[ 32.071582] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \_SB_.SMB0 1 (20120320/utaddress-251)
[ 32.071598] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 32.075135] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
[ 32.075364] sp5100_tco: mmio address 0xbafe00 already in use
[ 32.127224] uvcvideo: Found UVC 1.00 device ASUS USB2.0 WebCam (058f:a016)
[ 32.136670] input: ASUS USB2.0 WebCam as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input7
[ 32.136927] usbcore: registered new interface driver uvcvideo
[ 32.136931] USB Video Class driver (1.1.1)
[ 32.144186] Bluetooth: Core ver 2.16
[ 32.144276] NET: Registered protocol family 31
[ 32.144279] Bluetooth: HCI device and connection manager initialized
[ 32.144283] Bluetooth: HCI socket layer initialized
[ 32.144286] Bluetooth: L2CAP socket layer initialized
[ 32.144294] Bluetooth: SCO socket layer initialized
[ 32.145138] usbcore: registered new interface driver btusb
[ 32.162055] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 32.162199] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 32.162582] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[ 32.162711] snd_hda_intel 0000:01:00.1: irq 41 for MSI/MSI-X
[ 32.190536] cfg80211: Calling CRDA to update world regulatory domain
[ 32.194384] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:04.0/0000:01:00.1/sound/card1/input10
[ 32.243666] type=1400 audit(1353302442.457:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=581 comm="apparmor_parser"
[ 32.244380] type=1400 audit(1353302442.457:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=581 comm="apparmor_parser"
[ 32.244774] type=1400 audit(1353302442.457:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=581 comm="apparmor_parser"
[ 32.293189] ath: EEPROM regdomain: 0x60
[ 32.293197] ath: EEPROM indicates we should expect a direct regpair map
[ 32.293202] ath: Country alpha2 being used: 00
[ 32.293204] ath: Regpair used: 0x60
[ 32.293210] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 32.293214] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 32.293217] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 32.293220] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 32.293223] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 32.293226] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 32.293229] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 32.293232] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 32.293235] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 32.293238] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 32.293241] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 32.293244] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 32.293246] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 32.293249] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 32.293252] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 32.293255] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 32.293258] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 32.293261] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 32.293263] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 32.293266] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 32.293269] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 32.293272] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 32.293275] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 32.293278] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 32.293280] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 32.293283] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 32.293286] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 32.293289] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 32.295048] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 32.370294] microcode: CPU0: patch_level=0x05000101
[ 32.371321] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 32.374990] Registered led device: ath9k-phy0
[ 32.375011] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8820000, irq=17
[ 32.453425] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 32.453432] Bluetooth: BNEP filters: protocol multicast
[ 32.466905] Bluetooth: RFCOMM TTY layer initialized
[ 32.466916] Bluetooth: RFCOMM socket layer initialized
[ 32.466919] Bluetooth: RFCOMM ver 1.11
[ 32.491958] ppdev: user-space parallel port driver
[ 32.577676] type=1400 audit(1353302442.789:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=696 comm="apparmor_parser"
[ 32.590479] type=1400 audit(1353302442.801:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=696 comm="apparmor_parser"
[ 32.847473] init: failsafe main process (723) killed by TERM signal
[ 33.087820] asus_wmi: ASUS WMI generic driver loaded
[ 33.095036] asus_wmi: Initialization: 0x1asus_wmi: BIOS WMI version: 7.6
[ 33.095240] asus_wmi: SFUN value: 0x1a0877<5>[ 33.119447] type=1400 audit(1353302443.333:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=846 comm="apparmor_parser"
[ 33.120188] type=1400 audit(1353302443.333:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=846 comm="apparmor_parser"
[ 33.127942] type=1400 audit(1353302443.341:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=847 comm="apparmor_parser"
[ 33.128536] type=1400 audit(1353302443.341:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=847 comm="apparmor_parser"
[ 33.133209] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input11
[ 33.137899] type=1400 audit(1353302443.353:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=852 comm="apparmor_parser"
[ 33.143262] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[ 33.167045] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x15, 0x0c.
[ 33.206952] asus_wmi: Backlight controlled by ACPI video driver
[ 33.291504] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input12
[ 33.351696] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 33.351707] cfg80211: World regulatory domain updated:
[ 33.351709] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 33.351713] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 33.351717] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 33.351720] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 33.351723] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 33.351726] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 33.405296] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 33.405317] microcode: CPU1: patch_level=0x05000101
[ 33.494057] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 33.494188] microcode: Microcode Update Driver: v2.00 <
tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 33.509564] kvm: Nested Virtualization enabled
[ 33.509571] kvm: Nested Paging enabled
[ 33.590152] r8169 0000:03:00.0: eth0: link down
[ 33.590171] r8169 0000:03:00.0: eth0: link down
[ 33.590585] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.591340] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.600949] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.823503] usbcore: registered new interface driver ath3k
[ 33.838823] usb 4-4: USB disconnect, device number 2
[ 33.856120] vesafb: mode is 1152x864x32, linelength=4608, pages=0
[ 33.856127] vesafb: scrolling: redraw
[ 33.856132] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 33.858845] vesafb: framebuffer at 0xc0000000, mapped to 0xf8f80000, using 3904k, total 3904k
[ 33.859438] Console: switching to colour frame buffer device 144x54
[ 33.859505] fb0: VESA VGA frame buffer device
[ 34.807411] usb 4-4: new full-speed USB device number 3 using ohci_hcd
[ 34.967738] usb 4-4: New USB device found, idVendor=0cf3, idProduct=3005
[ 34.967746] usb 4-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 35.249358] r8169 0000:03:00.0: eth0: link up
[ 35.249635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 35.911659] fglrx_pci 0000:01:00.0: irq 42 for MSI/MSI-X
[ 35.913122] [fglrx] Firegl kernel thread PID: 1318
[ 35.917829] [fglrx] Firegl kernel thread PID: 1319
[ 35.923205] [fglrx] Firegl kernel thread PID: 1320
[ 35.923521] [fglrx] IRQ 42 Enabled
[ 35.982489] [fglrx] Gart USWC size:1256 M.
[ 35.982497] [fglrx] Gart cacheable size:497 M.
[ 35.982506] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 35.982509] [fglrx] Reserved FB block: Unshared offset:f910000, size:3f0000
[ 35.982513] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 49.570662] init: plymouth-stop pre-start process (2524) terminated with status 1
[ 79.584668] Bluetooth: HIDP (Human Interface Emulation) ver 1.2