Ubuntu Sverige

Tjenna gott folk, jag har funderat en hel del över mitt grafikkort..
Om det verkligen är 3daccelerator på när jag kör ubuntu.

Min xorg.conf ser ut på följande vis:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "se"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "NVIDIA Corporation NV34 [GeForce FX 5200]"
Driver "nvidia"
BusID "PCI:1:0:0"
VideoRam 128000
Option "TwinView" "true"
Option "TwinViewOrientation" "Clone"
Option "TVOutFormat" "SVIDEO"
Option "TVStandard" "PAL-G"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "50"
Option "MetaModes" "1024x768,1024x768;800x600,800x600;640x480,640x480; 512x384,512x384"
EndSection

Section "Monitor"
Identifier "MCM 171E"
Option "DPMS"
HorizSync 30-72
VertRefresh 50-160
EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV34 [GeForce FX 5200]"
Monitor "MCM 171E"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x960" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x960" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x960" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x960" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x960" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x960" "1024x768" "800x600"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection


väldigt enkel tvout config också för detta kortet.. funkar dessutom väldigt bra med clone..
Men det jag funderade på var för mina skärmsläckare laggar, inte ens dom enklaste spel som t-ex stepmania flyter på fint..
Jag har testat att lägga till lite diverse koder i min xorg som t.ex renderaccel = true m.m men det pajjar min xorg fil helt tyvärr.Sen vill jag tillägga att jag kör på en celeron 2,66ghz 512mb ram och 128mb grafik..
samt att jag får upp nvidia loggan innan inloggningsskärmen.

Nåfon som vet varför skärmsläckare och spel m.m laggar? eller om ni har någon bra xorg config för just geforce fx5200..

mch MachNine

Här hittar du en tråd där det diskuters om 5200, verkar som at några fick den att fungera med äldre drivrutiner. Vad bra, nu vet jag att hoppa över den nvidia-chipset.

http://ubuntuforums.org/showthread.php? ... force+5200

tackar så mycket

ska ta och gå igenom denna guide sen för att se om jag får det att fungera!

Jag har ett geforce 5200 128mb och det rullar på fint Compiz är inga som helst problem. Fast för mig funkade compiz på 8mb grafik också :>