Ubuntu Sverige

Forum för Ubuntus svenska gemenskap
https://ubuntu-se.servebbs.org/

ändra upplösning?

https://ubuntu-se.servebbs.org/viewtopic.php?t=13366

Sida 1 av 1

ändra upplösning?

Postat: 21 jul 2007, 22:46
av Galgalid
Hur ändrar jag upplösningen? Jag har en 1280x1024 skärm men max-upplösningen är 1024x768(en riktig plåga): min xorg.conf ser ut såhär:

Kod: Markera allt


Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"se"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"stylus"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"eraser"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"cursor"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies Inc RV380 0x3e50 [Radeon X600]"
	Driver		"ati"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
	HorizSync	28-51
	VertRefresh	43-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies Inc RV380 0x3e50 [Radeon X600]"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1024x768" "800x600"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1024x768" "800x600"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1024x768" "800x600"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1024x768" "800x600"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1024x768" "800x600"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1024x768" "800x600"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus"	"SendCoreEvents"
	InputDevice     "cursor"	"SendCoreEvents"
	InputDevice     "eraser"	"SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection
Jag ändrade fölande i förhoppningen att nåt skulle hända: "1280x1024" "1024x768" "800x600". Det stod ursprungligen: "1024x768" "800x600" "640x480"

Så jag ändrade upp det ett snäpp. För säkerhets-skull har jag gjort en back-up på xorg.conf ;)

SV: ändra upplösning?

Postat: 21 jul 2007, 22:48
av koch
Så gjorde jag med fast jag la bara till 1280x940... Så jag vet inte vad som kan vara problemet.

SV: ändra upplösning?

Postat: 22 jul 2007, 09:20
av Okänd
funkar 1280x1024 i live-cd?

SV: ändra upplösning?

Postat: 22 jul 2007, 09:31
av zero gravity
Ibland glömmer man att starta om x efter man har ändrat i xorg.
Tryck ctrl+alt+backspace (bakåtpil) för att starta om x. Logga sedan in och kolla om din upplösning står med under System -> Inställningar -> Skärmupplösning.

Alternativt kan du configurera om hela xorg.conf med kommandot:

Kod: Markera allt

dpkg-reconfigure xserver-xorg

SV: ändra upplösning?

Postat: 22 jul 2007, 11:16
av Galgalid
jag kör en x-config och provar...meddelar resultatet sen

SV: ändra upplösning?

Postat: 22 jul 2007, 11:30
av Samme
Jag lånar tråden.Hoppas det går bra

xorg.conf ser ut så här och den har alltid gjort det(=har inte ändrat i den).
Men jag kan inte få 1280x1024  :-\

Kod: Markera allt

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	Fontpath	"/usr/share/fonts/X11/misc"
	Fontpath	"/usr/share/fonts/X11/cyrillic"
	Fontpath	"/usr/share/fonts/X11/100dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/75dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/Type1"
	Fontpath	"/usr/share/fonts/X11/100dpi"
	Fontpath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	Fontpath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load		"i2c"
	Load		"bitmap"
	Load		"ddc"
	Load		"extmod"
	Load		"freetype"
	Load		"glx"
	Load		"int10"
	Load		"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"se"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"nVidia Corporation NV43 [GeForce 6600]"
	Driver		"nvidia"
	Busid		"PCI:1:0:0"
	Option		"AddARGBVisuals"	"True"
	Option		"AddARGBGLXVisuals"	"True"
	Option		"NoLogo"	"True"
EndSection

Section "Monitor"
	Identifier	"TFT 30"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"nVidia Corporation NV43 [GeForce 6600]"
	Monitor		"TFT 30"
	Defaultdepth	24
	SubSection "Display"
		Depth	1
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	4
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	8
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	15
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	16
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	24
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen "Default Screen"
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	Inputdevice	"stylus"	"SendCoreEvents"
	Inputdevice	"cursor"	"SendCoreEvents"
	Inputdevice	"eraser"	"SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection
Mvh Samme

SV: ändra upplösning?

Postat: 22 jul 2007, 11:35
av Rasmus
Samme skrev: Jag lånar tråden.Hoppas det går bra

xorg.conf ser ut så här och den har alltid gjort det(=har inte ändrat i den).
Men jag kan inte få 1280x1024  :-\

Kod: Markera allt

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	Fontpath	"/usr/share/fonts/X11/misc"
	Fontpath	"/usr/share/fonts/X11/cyrillic"
	Fontpath	"/usr/share/fonts/X11/100dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/75dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/Type1"
	Fontpath	"/usr/share/fonts/X11/100dpi"
	Fontpath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	Fontpath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load		"i2c"
	Load		"bitmap"
	Load		"ddc"
	Load		"extmod"
	Load		"freetype"
	Load		"glx"
	Load		"int10"
	Load		"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"se"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"nVidia Corporation NV43 [GeForce 6600]"
	Driver		"nvidia"
	Busid		"PCI:1:0:0"
	Option		"AddARGBVisuals"	"True"
	Option		"AddARGBGLXVisuals"	"True"
	Option		"NoLogo"	"True"
EndSection

Section "Monitor"
	Identifier	"TFT 30"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"nVidia Corporation NV43 [GeForce 6600]"
	Monitor		"TFT 30"
	Defaultdepth	24
	SubSection "Display"
		Depth	1
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	4
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	8
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	15
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	16
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	24
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen "Default Screen"
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	Inputdevice	"stylus"	"SendCoreEvents"
	Inputdevice	"cursor"	"SendCoreEvents"
	Inputdevice	"eraser"	"SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection
Mvh Samme
Gör som jag gjorde och tvinga han att använda 1280x1024 d.v.s. ta bort dem andra. OPS ta backup på xorg först.

SV: ändra upplösning?

Postat: 22 jul 2007, 11:54
av Samme
Okej, hur tar jag backup då?

SV: ändra upplösning?

Postat: 22 jul 2007, 11:55
av Galgalid
sudo cp /etc/X11/xorg.conf /home/dittLoginNamn/xorg.conf.backup

för att återställa:

sudo cp /home/dittLoginNamn/xorg.conf.backup /etc/X11/xorg.conf

SV: ändra upplösning?

Postat: 22 jul 2007, 11:57
av Galgalid
Jag ändrade till bara "1280x1024"....och nu fick jag en hel del skumma modes...typ 1280 x 800 med mera..men inte den jag letade efter...annars kan man väl lista alla upplösningar upp till dom på 2000 eller vad det nu är....är nån villig att göra en lista åt mig? ;D

SV: ändra upplösning?

Postat: 22 jul 2007, 12:05
av Okänd
Listan syns här....  det står HÄR vid bilden,  Tab o mellanslag för att aktivera en upplösning.

http://ubuntu-se.org/drupal/node/249

Sen är det lite beroende vilken drivare man kör...OggVorbis siggen tyder på att man kör "rent"  8)

SV: ändra upplösning?

Postat: 22 jul 2007, 12:16
av Galgalid
yep, jag kör rent ^^..vart tog förresten sid/stoffepojken vägen?  Det accet är raderat :o

SV: ändra upplösning?

Postat: 22 jul 2007, 12:32
av Okänd
Galgalid skrev: yep, jag kör rent ^^
Jo då får du väl bara bocka i upplösningen med ett  mellanslag.

samt sedan starta om X med Ctrl-Alt-Backsteg och sedan  kolla upplösningen i Meny System> Inställningar.

Kör man 3D drivare får man då även kolla det via tex nVidia-settings    8)

SV: ändra upplösning?

Postat: 22 jul 2007, 14:39
av Galgalid
funkade inte  :o när jag loggar in så är hänger sig allt...så det blir att återställa xorg.conf bara
Alla tidsangivelser är UTC+02:00 UTC+2
Sida 1 av 1

Powered by phpBB® Forum Software © phpBB Limited

Swedish translation by phpBB Sweden © 2006-2015