Huawei mobilt bredband igen

[lasseroth]

Körde tidigare 10.10, jätteproblem med internet.
Har nu installerat 11.04/64.
Länge gick det som tåget, den anslöt nästan snabbare än den startade.
Förr några dagar sedan kom en uppdatering, tror det var något med kärnan,
och nu ansluter inte modemet.
För att få igång det måste jag disconnecta modemet och gå in och klicka på och av anslut automatiskt.
Kollat lite andra svar där man velat ha lspci och dmesg
Kommer här
lasse@lasse-MS-7623:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce 450 GTS] (rev a1)
01:00.1 Audio device: nVidia Corporation GF106 High Definition Audio Controller (rev a1)
02:00.0 Ethernet controller: Atheros Communications AR8131 Gigabit Ethernet (rev c0)
lasse@lasse-MS-7623:~$ ^C

[lasseroth]

och dmesg:

Gömt innehåll: Visa!

[ 0.775871] pnp 00:09: [io 0x0c50-0x0c51]
[ 0.775874] pnp 00:09: [io 0x0c52]
[ 0.775876] pnp 00:09: [io 0x0c6c]
[ 0.775877] pnp 00:09: [io 0x0c6f]
[ 0.775878] pnp 00:09: [io 0x0cd0-0x0cd1]
[ 0.775879] pnp 00:09: [io 0x0cd2-0x0cd3]
[ 0.775880] pnp 00:09: [io 0x0cd4-0x0cd5]
[ 0.775882] pnp 00:09: [io 0x0cd6-0x0cd7]
[ 0.775883] pnp 00:09: [io 0x0cd8-0x0cdf]
[ 0.775884] pnp 00:09: [io 0x0800-0x089f]
[ 0.775886] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.775887] pnp 00:09: [io 0x0b00-0x0b0f]
[ 0.775888] pnp 00:09: [io 0x0b20-0x0b3f]
[ 0.775890] pnp 00:09: [io 0x0900-0x090f]
[ 0.775891] pnp 00:09: [io 0x0910-0x091f]
[ 0.775892] pnp 00:09: [io 0xfe00-0xfefe]
[ 0.775893] pnp 00:09: [io 0x0060]
[ 0.775895] pnp 00:09: [io 0x0064]
[ 0.775896] pnp 00:09: [mem 0xffb80000-0xffbfffff]
[ 0.775897] pnp 00:09: [mem 0xfec10000-0xfec1001f]
[ 0.775955] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.775957] system 00:09: [io 0x040b] has been reserved
[ 0.775959] system 00:09: [io 0x04d6] has been reserved
[ 0.775961] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.775962] system 00:09: [io 0x0c14] has been reserved
[ 0.775964] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.775966] system 00:09: [io 0x0c52] has been reserved
[ 0.775967] system 00:09: [io 0x0c6c] has been reserved
[ 0.775969] system 00:09: [io 0x0c6f] has been reserved
[ 0.775970] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.775972] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.775974] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.775976] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.775977] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.775979] system 00:09: [io 0x0800-0x089f] has been reserved
[ 0.775981] system 00:09: [io 0x0b00-0x0b0f] has been reserved
[ 0.775983] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.775984] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.775986] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.775988] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.775990] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.775992] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.775994] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.776075] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.776077] pnp 00:0a: [io 0x0600-0x060f]
[ 0.776078] pnp 00:0a: [io 0x0ae0-0x0aef]
[ 0.776108] system 00:0a: [io 0x0600-0x060f] has been reserved
[ 0.776110] system 00:0a: [io 0x0ae0-0x0aef] has been reserved
[ 0.776112] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.776141] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.776172] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.776174] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.776244] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.776246] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.776277] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.776364] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.776366] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 0.776367] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.776369] pnp 00:0d: [mem 0x00100000-0xcfefffff]
[ 0.776370] pnp 00:0d: [mem 0xfec00000-0xffffffff]
[ 0.776406] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.776408] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.776410] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.776412] system 00:0d: [mem 0x00100000-0xcfefffff] could not be reserved
[ 0.776414] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.776416] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.776491] pnp: PnP ACPI: found 14 devices
[ 0.776493] ACPI: ACPI bus type pnp unregistered
[ 0.782182] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.782185] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.782188] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfeafffff]
[ 0.782191] pci 0000:00:02.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.782194] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.782196] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
[ 0.782198] pci 0000:00:05.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.782200] pci 0000:00:05.0: bridge window [mem pref disabled]
[ 0.782203] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.782204] pci 0000:00:14.4: bridge window [io disabled]
[ 0.782209] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.782212] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.782231] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.782234] pci 0000:00:02.0: setting latency timer to 64
[ 0.782240] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.782242] pci 0000:00:05.0: setting latency timer to 64
[ 0.782249] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.782251] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.782253] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.782254] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.782256] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
[ 0.782257] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.782260] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.782262] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfeafffff]
[ 0.782263] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.782265] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.782267] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.782268] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.782270] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.782271] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.782273] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.782275] pci_bus 0000:03: resource 8 [mem 0xcff00000-0xdfffffff]
[ 0.782276] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.782304] NET: Registered protocol family 2
[ 0.782420] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.783326] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.785544] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.785817] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.785820] TCP reno registered
[ 0.785830] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.785857] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.785958] NET: Registered protocol family 1
[ 0.898662] Freeing initrd memory: 13172k freed
[ 0.990075] pci 0000:01:00.0: Boot video device
[ 0.990089] PCI: CLS 64 bytes, default 64
[ 0.993347] PCI-DMA: Disabling AGP.
[ 0.993452] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.993453] PCI-DMA: using GART IOMMU.
[ 0.993455] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.996245] audit: initializing netlink socket (disabled)
[ 0.996261] type=2000 audit(1310972940.990:1): initialized
[ 1.006810] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.008230] VFS: Disk quotas dquot_6.5.2
[ 1.008295] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.008825] fuse init (API version 7.16)
[ 1.008898] msgmni has been set to 7916
[ 1.009237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.009328] io scheduler noop registered
[ 1.009332] io scheduler deadline registered
[ 1.009391] io scheduler cfq registered (default)
[ 1.009584] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.009616] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.009821] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.009852] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 1.009962] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.009981] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.010155] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.170056] ACPI: Power Button [PWRB]
[ 1.170121] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.170125] ACPI: Power Button [PWRF]
[ 1.170251] ACPI: acpi_idle registered with cpuidle
[ 1.171209] ERST: Table is not found!
[ 1.171277] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.191888] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.430869] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.440336] Linux agpgart interface v0.103
[ 1.441062] brd: module loaded
[ 1.441386] loop: module loaded
[ 1.441466] i2c-core: driver [adp5520] using legacy suspend method
[ 1.441467] i2c-core: driver [adp5520] using legacy resume method
[ 1.441711] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.441739] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 1.442156] Fixed MDIO Bus: probed
[ 1.442180] PPP generic driver version 2.4.2
[ 1.442227] tun: Universal TUN/TAP device driver, 1.6
[ 1.442229] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.442291] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.442421] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.442463] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.442529] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.520067] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.520093] ehci_hcd 0000:00:12.2: debug port 1
[ 1.520120] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbfff800
[ 1.540049] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.540176] hub 1-0:1.0: USB hub found
[ 1.540180] hub 1-0:1.0: 6 ports detected
[ 1.540422] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.540443] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.540504] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.540554] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.540574] ehci_hcd 0000:00:13.2: debug port 1
[ 1.540594] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbfff400
[ 1.560045] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.560161] hub 2-0:1.0: USB hub found
[ 1.560165] hub 2-0:1.0: 6 ports detected
[ 1.560281] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.560422] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.560445] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.560507] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.560579] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbffe000
[ 1.624177] hub 3-0:1.0: USB hub found
[ 1.624188] hub 3-0:1.0: 3 ports detected
[ 1.624407] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.624434] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.624500] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.624558] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbffd000
[ 1.684176] hub 4-0:1.0: USB hub found
[ 1.684186] hub 4-0:1.0: 3 ports detected
[ 1.684397] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.684421] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.684483] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.684554] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbffc000
[ 1.744194] hub 5-0:1.0: USB hub found
[ 1.744204] hub 5-0:1.0: 3 ports detected
[ 1.744413] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.744436] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.744499] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.744560] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbff7000
[ 1.804177] hub 6-0:1.0: USB hub found
[ 1.804187] hub 6-0:1.0: 3 ports detected
[ 1.804398] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.804421] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.804491] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.804548] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbff6000
[ 1.860066] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.864181] hub 7-0:1.0: USB hub found
[ 1.864191] hub 7-0:1.0: 2 ports detected
[ 1.864286] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.864383] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.864781] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.864790] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.864919] mousedev: PS/2 mouse device common for all mice
[ 1.865008] rtc_cmos 00:02: RTC can wake from S4
[ 1.920130] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.920155] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.920249] device-mapper: uevent: version 1.0.3
[ 1.920303] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 1.920420] device-mapper: multipath: version 1.2.0 loaded
[ 1.920424] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.920680] cpuidle: using governor ladder
[ 1.920683] cpuidle: using governor menu
[ 1.920877] TCP cubic registered
[ 1.920960] NET: Registered protocol family 10
[ 1.921308] NET: Registered protocol family 17
[ 1.921324] Registering the dns_resolver key type
[ 1.921380] powernow-k8: Found 1 AMD Athlon(tm) II X4 640 Processor (4 cpu cores) (version 2.20.00)
[ 1.921411] powernow-k8: 0 : pstate 0 (3000 MHz)
[ 1.921412] powernow-k8: 1 : pstate 1 (2300 MHz)
[ 1.921413] powernow-k8: 2 : pstate 2 (1800 MHz)
[ 1.921415] powernow-k8: 3 : pstate 3 (800 MHz)
[ 1.921821] PM: Hibernation image not present or could not be loaded.
[ 1.921830] registered taskstats version 1
[ 1.922021] Magic number: 3:714:167
[ 1.922064] acpi PNP0000:00: hash matches
[ 1.922121] rtc_cmos 00:02: setting system clock to 2011-07-18 07:09:03 UTC (1310972943)
[ 1.922123] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.922125] EDD information not available.
[ 1.923395] Freeing unused kernel memory: 956k freed
[ 1.923606] Write protecting the kernel read-only data: 10240k
[ 1.923791] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio1/input/input2
[ 1.924380] Freeing unused kernel memory: 184k freed
[ 1.928120] Freeing unused kernel memory: 1440k freed
[ 1.946100] <30>udev[104]: starting version 167
[ 1.972020] Btrfs loaded
[ 1.977527] scsi0 : pata_atiixp
[ 1.978127] scsi1 : pata_atiixp
[ 1.978598] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.978601] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.978887] atl1c 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.978897] atl1c 0000:02:00.0: setting latency timer to 64
[ 1.978969] ahci 0000:00:11.0: version 3.0
[ 1.978992] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.979109] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.979112] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.979925] scsi2 : ahci
[ 1.979988] scsi3 : ahci
[ 1.980059] scsi4 : ahci
[ 1.980108] scsi5 : ahci
[ 1.980175] scsi6 : ahci
[ 1.980225] scsi7 : ahci
[ 1.980261] ata3: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffd00 irq 22
[ 1.980264] ata4: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffd80 irq 22
[ 1.980267] ata5: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe00 irq 22
[ 1.980269] ata6: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe80 irq 22
[ 1.980272] ata7: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbffff00 irq 22
[ 1.980275] ata8: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbffff80 irq 22
[ 1.982986] xor: automatically using best checksumming function: generic_sse
[ 1.990051] Refined TSC clocksource calibration: 3000.122 MHz.
[ 1.990058] Switching to clocksource tsc
[ 2.030021] generic_sse: 12273.200 MB/sec
[ 2.030023] xor: using function: generic_sse (12273.200 MB/sec)
[ 2.046395] usbcore: registered new interface driver uas
[ 2.210046] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 2.250498] atl1c 0000:02:00.0: version 1.0.1.0-NAPI
[ 2.360085] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.360144] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.360195] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.361191] hub 1-6:1.0: USB hub found
[ 2.361383] hub 1-6:1.0: 4 ports detected
[ 2.560069] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.560099] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.560122] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.562540] ata8.00: ATAPI: ATAPI iHAS124 B, AL0L, max UDMA/100
[ 2.563380] ata8.00: configured for UDMA/100
[ 2.567418] ata3.00: ATA-8: WDC WD10EALX-009BA0, 15.01H15, max UDMA/133
[ 2.567421] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.569245] ata3.00: configured for UDMA/133
[ 2.569419] scsi 2:0:0:0: Direct-Access ATA WDC WD10EALX-009 15.0 PQ: 0 ANSI: 5
[ 2.569578] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.569606] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.569656] sd 2:0:0:0: [sda] Write Protect is off
[ 2.569658] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.569693] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.573719] ata4.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133
[ 2.573722] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.574932] ata4.00: configured for UDMA/133
[ 2.575101] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5
[ 2.575255] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.575307] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.575406] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.575408] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.575468] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.576858] sda: sda1
[ 2.577238] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.578763] scsi 7:0:0:0: CD-ROM ATAPI iHAS124 B AL0L PQ: 0 ANSI: 5
[ 2.582124] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.582128] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.582245] sr 7:0:0:0: Attached scsi CD-ROM sr0
[ 2.582311] sr 7:0:0:0: Attached scsi generic sg2 type 5
[ 2.591307] sdb: sdb1 sdb2
[ 2.591746] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.593889] device-mapper: dm-raid45: initialized v0.2594b
[ 2.596476] Initializing USB Mass Storage driver...
[ 2.597179] scsi8 : usb-storage 1-1:1.0
[ 2.597285] usbcore: registered new interface driver usb-storage
[ 2.597287] USB Mass Storage support registered.
[ 2.690080] usb 3-3: new low speed USB device using ohci_hcd and address 2
[ 2.917210] input: Ullman Technology Ullman PenClic Mouse (tm) as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input3
[ 2.917306] generic-usb 00030600.0001: input,hidraw0: USB HID v1.10 Mouse [Ullman Technology Ullman PenClic Mouse (tm) ] on usb-0000:00:12.0-3/input0
[ 2.917322] usbcore: registered new interface driver usbhid
[ 2.917323] usbhid: USB HID core driver
[ 2.980643] usb 1-6.2: new high speed USB device using ehci_hcd and address 5
[ 3.163001] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.360817] usb 1-6.4: new high speed USB device using ehci_hcd and address 6
[ 3.591937] scsi 8:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
[ 3.592402] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 3.594544] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 5.280063] usb 1-4: new high speed USB device using ehci_hcd and address 7
[ 5.436704] scsi9 : usb-storage 1-4:1.0
[ 5.437017] scsi10 : usb-storage 1-4:1.1
[ 6.431527] scsi 9:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 6.432145] scsi 10:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2
[ 6.434263] sr1: scsi-1 drive
[ 6.434378] sr 9:0:0:0: Attached scsi CD-ROM sr1
[ 6.434433] sr 9:0:0:0: Attached scsi generic sg4 type 5
[ 6.434653] sd 10:0:0:0: Attached scsi generic sg5 type 0
[ 6.437511] sd 10:0:0:0: [sdd] Attached SCSI removable disk
[ 14.142383] Adding 8798204k swap on /dev/sdb1. Priority:-1 extents:1 across:8798204k
[ 14.151009] <30>udev[446]: starting version 167
[ 14.261741] type=1400 audit(1310972955.837:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=508 comm="apparmor_parser"
[ 14.262014] type=1400 audit(1310972955.837:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=508 comm="apparmor_parser"
[ 14.262187] type=1400 audit(1310972955.837:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=508 comm="apparmor_parser"
[ 14.528302] MCE: In-kernel MCE decoding enabled.
[ 14.529449] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 14.529452] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.663977] usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
[ 14.664010] usbcore: registered new interface driver usblp
[ 14.679736] parport_pc 00:06: reported by Plug and Play ACPI
[ 14.679793] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 14.773898] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 14.773974] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 14.779141] lp0: using parport0 (interrupt-driven).
[ 14.826729] ppdev: user-space parallel port driver
[ 14.842232] EDAC MC: Ver: 2.1.0 Jun 28 2011
[ 14.861195] EDAC amd64_edac: v3.3.0
[ 14.861327] EDAC amd64: DRAM ECC disabled.
[ 14.861347] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 14.861348] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 14.861349] (Note that use of the override may cause unknown side effects.)
[ 14.920996] Linux video capture interface: v2.00
[ 14.934158] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0805)
[ 14.971748] input: UVC Camera (046d:0805) as /devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6.2/1-6.2:1.0/input/input4
[ 14.971873] usbcore: registered new interface driver uvcvideo
[ 14.971875] USB Video Class driver (v1.0.0)
[ 15.162559] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 15.220621] nvidia: module license 'NVIDIA' taints kernel.
[ 15.220625] Disabling lock debugging due to kernel taint
[ 15.572586] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 15.572598] nvidia 0000:01:00.0: setting latency timer to 64
[ 15.572603] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 15.572814] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.06 Mon Apr 18 14:53:56 PDT 2011
[ 15.679165] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.773160] atl1c 0000:02:00.0: irq 42 for MSI/MSI-X
[ 15.795564] hda-codec: no NID for mapping control Independent HP:0:0
[ 15.797315] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 15.797318] hda_intel: Disable MSI for Nvidia chipset
[ 15.797361] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 15.840739] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.876161] type=1400 audit(1310972957.447:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=914 comm="apparmor_parser"
[ 15.877977] type=1400 audit(1310972957.447:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=918 comm="apparmor_parser"
[ 15.878022] type=1400 audit(1310972957.447:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=919 comm="apparmor_parser"
[ 15.878322] type=1400 audit(1310972957.447:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=918 comm="apparmor_parser"
[ 15.879874] type=1400 audit(1310972957.447:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=916 comm="apparmor_parser"
[ 15.881541] type=1400 audit(1310972957.457:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=915 comm="apparmor_parser"
[ 15.881821] type=1400 audit(1310972957.457:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=915 comm="apparmor_parser"
[ 15.944128] usbcore: registered new interface driver snd-usb-audio
[ 16.401995] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,commit=0
[ 18.145739] vesafb: framebuffer at 0xd5000000, mapped to 0xffffc90013d80000, using 1216k, total 1216k
[ 18.145742] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 18.145744] vesafb: scrolling: redraw
[ 18.145747] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 18.145876] Console: switching to colour frame buffer device 80x30
[ 18.145885] fb0: VESA VGA frame buffer device
[ 18.341995] ioremap error for 0xcfe90000-0xcfe91000, requested 0x10, got 0x0
[ 20.138239] usb 1-6.4: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 21.099041] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,commit=0
[ 22.326140] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 1099.695550] usb 1-4: USB disconnect, address 7
[ 1104.990145] usb 1-4: new high speed USB device using ehci_hcd and address 8
[ 1105.148594] scsi11 : usb-storage 1-4:1.0
[ 1105.149135] scsi12 : usb-storage 1-4:1.1
[ 1106.141758] scsi 11:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 1106.142240] scsi 12:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2
[ 1106.148725] sr1: scsi-1 drive
[ 1106.149091] sr 11:0:0:0: Attached scsi CD-ROM sr1
[ 1106.149282] sr 11:0:0:0: Attached scsi generic sg4 type 5
[ 1106.150599] sd 12:0:0:0: Attached scsi generic sg5 type 0
[ 1106.158466] sd 12:0:0:0: [sdd] Attached SCSI removable disk
[ 1106.466525] usb 1-4: USB disconnect, address 8
[ 1111.010110] usb 1-4: new high speed USB device using ehci_hcd and address 9
[ 1111.169770] scsi13 : usb-storage 1-4:1.5
[ 1111.171267] scsi14 : usb-storage 1-4:1.6
[ 1111.268787] usbcore: registered new interface driver usbserial
[ 1111.268799] USB Serial support registered for generic
[ 1111.268839] usbcore: registered new interface driver usbserial_generic
[ 1111.268841] usbserial: USB Serial Driver core
[ 1111.287919] cdc_ether 1-4:1.1: wwan0: register 'cdc_ether' at usb-0000:00:12.2-4, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 1111.288636] usbcore: registered new interface driver cdc_ether
[ 1111.335733] USB Serial support registered for GSM modem (1-port)
[ 1111.335995] option 1-4:1.0: GSM modem (1-port) converter detected
[ 1111.336551] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0
[ 1111.336618] option 1-4:1.3: GSM modem (1-port) converter detected
[ 1111.336793] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1
[ 1111.336826] option 1-4:1.4: GSM modem (1-port) converter detected
[ 1111.336989] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB2
[ 1111.337049] usbcore: registered new interface driver option
[ 1111.337054] option: v0.7.2:USB Driver for GSM modems
[ 1112.171640] scsi 13:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 1112.172227] scsi 14:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2
[ 1112.177090] sr1: scsi-1 drive
[ 1112.177484] sr 13:0:0:0: Attached scsi CD-ROM sr1
[ 1112.177737] sr 13:0:0:0: Attached scsi generic sg4 type 5
[ 1112.183545] sd 14:0:0:0: Attached scsi generic sg5 type 0
[ 1112.185405] sd 14:0:0:0: [sdd] Attached SCSI removable disk
[ 1126.014153] PPP BSD Compression module registered
[ 1126.030401] PPP Deflate Compression module registered
lasse@lasse-MS-7623:~$

[P.Forsberg]

Vilket Huawei kör du med ?

LJ

[lasseroth]

E1820 huawei
men som sagt det gick skitbra ända fram till uppdateringen för ett par dagar sedan

[P.Forsberg]

Försök med att ta bort och installera om usb-modeswitch med Synaptic.

LJ

[lasseroth]

Funkade jättebra stort tack Little John.