Dela ut skrivare med CUPS.
Postat: 30 maj 2010, 21:50
Jag har installerat min HP DeskJet 960C skrivare på min Ubuntu server och det funkar mycket fint att skriva ut från server datorn.
Men jag har problem med att dela ut skrivaren till andra datorer.
Problemet är följande: Försöker jag ansluta min skrivare på min klient dator så får jag följande fel "0x0000000d". Ett helt oförstående fel i windows.
Mina loggar visar följande när jag trycker "Anslut" på skrivaren i windows: Log: /var/log/samba/log.mittdatornamn
Så här ser min cupsd.conf ut
Så här ser min samba smb.conf ut som gäller printing
I /usr/share/cups/drivers ligger
i /usr/share/cups/drivers/x64 ligger
När jag kör kommandot:
cupsaddsmb -H PrintServer -U root -h PrintServer -v HP960C
Password for root required to access pelargir via SAMBA:
Så får jag upp "Det finns inga windows drivrutiner installerade"
När jag borde fått upp.
Vart ska jag börja leta ?
Jag tycker jag har försökt med allt. Men nu behöver jag lite hjälp.
Men jag har problem med att dela ut skrivaren till andra datorer.
Problemet är följande: Försöker jag ansluta min skrivare på min klient dator så får jag följande fel "0x0000000d". Ett helt oförstående fel i windows.
Mina loggar visar följande när jag trycker "Anslut" på skrivaren i windows: Log: /var/log/samba/log.mittdatornamn
Kod: Markera allt
[2010/05/30 21:37:47, 0] param/loadparm.c:9783(widelinks_warning)
Share 'IPC$' has wide links and unix extensions enabled. These parameters are incompatible. Wide links will be disabled for this share.Kod: Markera allt
#
#
# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
#
# Egna andringar.
ServerName Printserver # your printserver name
ServerAdmin emil@Printserver # the person for printer-related hate-mail, eg you
AccessLog /var/log/cups/access_log # probably doesn't need changing
ErrorLog /var/log/cups/error_log # doesn't really need changing either
MaxClients 10
# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
LogLevel debug
# Deactivate CUPS' internal logrotating, as we provide a better one, especially
# LogLevel debug2 gets usable now
MaxLogSize 0
# Administrator user group...
SystemGroup lpadmin
# Only listen for connections from the local machine.
#Listen localhost:631
Port 631
# Listen on the LAN interface, Port 631 (IPP)
Listen /var/run/cups/cups.sock
# Show shared printers on the local network.
Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseLocalProtocols CUPS dnssd
BrowseAddress @LOCAL
# Default authentication type, when authentication is required...
DefaultAuthType Basic
# Restrict access to the server...
<Location />
Order allow,deny
Allow @LOCAL
</Location>
# Restrict access to the admin pages...
<Location /admin>
Order allow,deny
Allow @LOCAL
</Location>
# Restrict access to configuration files...
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow @LOCAL
</Location>
# Set the default printer/job policies...
<Policy default>
# Job-related operations must be done by the owner or an administrator...
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription$
# Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
# AuthType Default
#Require user @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer A$
#AuthType Default
#Require user @SYSTEM
Order deny,allow
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
#Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
# Set the authenticated printer/job policies...
<Policy authenticated>
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI>
AuthType Default
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription$
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer A$
AuthType Default
Require user @SYSTEM
Order deny,allow
Allow @LOCAL
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
Så här ser min samba smb.conf ut som gäller printing
Kod: Markera allt
[global]
load printers = yes
printing = cups
printcap name = cups
security = user
[printers]
comment = All Printers
path = /var/spool/samba
browseable = yes
public = yes
guest ok = yes
writable = yes
printable = yes
[print$]
comment = Printer Drivers
path = /usr/share/cups/drivers
browseable = yes
guest ok = yes
read only = yes
[HP Deskjet 960C]
path = /var/spool/public
read only = yes
printable = yes
guest ok = yes
Kod: Markera allt
-r-xr-xr-x 1 root root 14234 2002-09-24 16:05 cups5.hlp
-r-xr-xr-x 1 root root 280268 2004-01-03 19:44 cupsdrv5.dll
-r-xr-xr-x 1 root root 219540 2004-01-03 19:44 cupsui5.dll
drwxr-xr-x 2 root root 4096 2010-05-28 15:55 x64
Kod: Markera allt
-r-xr-xr-x 1 root root 14234 2010-05-28 15:54 cups5.hlp
-r-xr-xr-x 1 root root 280268 2010-05-28 15:54 cupsdrv5.dll
-r-xr-xr-x 1 root root 219540 2010-05-28 15:54 cupsui5.dll
-rwxr--r-- 1 root root 22312 2010-05-28 15:55 hp-deskjet_960c.ppdcupsaddsmb -H PrintServer -U root -h PrintServer -v HP960C
Password for root required to access pelargir via SAMBA:
Så får jag upp "Det finns inga windows drivrutiner installerade"
När jag borde fått upp.
Kod: Markera allt
Running command: smbclient //pelargir/print\$ -N -U'root%######' -c 'mkdir W32X86;put /var/spool/cups/tmp/411b688237af4 W32X86/HPDeskJet930C.ppd;put /usr/share/cups/drivers/cupsdrv5.dll W32X86/cupsdrv5.dll;put /usr/share/cups/drivers/cupsui5.dll W32X86/cupsui5.dll;put /usr/share/cups/drivers/cups5.hlp W32X86/cups5.hlp'
Domain=[PELARGIR] OS=[Unix] Server=[Samba 3.0.5]
putting file /var/spool/cups/tmp/411b688237af4 as \W32X86/HPDeskJet930C.ppd (6269.3 kb/s) (average 6269.5 kb/s)
putting file /usr/share/cups/drivers/cupsdrv5.dll as \W32X86/cupsdrv5.dll (4718.9 kb/s) (average 4795.2 kb/s)
putting file /usr/share/cups/drivers/cupsui5.dll as \W32X86/cupsui5.dll (14292.9 kb/s) (average 6669.8 kb/s)
putting file /usr/share/cups/drivers/cups5.hlp as \W32X86/cups5.hlp (6949.9 kb/s) (average 6677.0 kb/s)
Running command: rpcclient pelargir -N -U'root%######' -c 'adddriver "Windows NT x86" "HPDeskJet930C:cupsdrv5.dll:HPDeskJet930C.ppd:cupsui5.dll:cups5.hlp:NULL:RAW:NULL"'
Printer Driver HPDeskJet930C successfully installed.
Running command: rpcclient pelargir -N -U'root%######' -c 'setdriver HPDeskJet930C HPDeskJet930C'
Succesfully set HPDeskJet930C to driver HPDeskJet930C. Vart ska jag börja leta ?
Jag tycker jag har försökt med allt. Men nu behöver jag lite hjälp.
