chassi fan hjälp snälla
Postat: 18 jan 2009, 21:03
hej jag har försökt installera im-sensors och kört detect etc men jag får lite fel i terminalen
sedan när jag kör -> sudo modprobe i2c-sensor så får jag detta meddelande
FATAL: Module i2c_sensor not found.
den övre del är detect skiten den undre är hela min modules config
1.
daniel@dapeamel:/etc$ sensors-detect
2.
You need to be root to run this script.
3.
daniel@dapeamel:/etc$ sudo bash
4.
[sudo] password for daniel:
5.
senroot@dapeamel:/etc# sensors-detect
6.
# sensors-detect revision 5249 (2008-05-11 22:56:25 +0200)
7.
8.
This program will help you determine which kernel modules you need
9.
to load to use lm_sensors most effectively. It is generally safe
10.
and recommended to accept the default answers to all questions,
11.
unless you know what you're doing.
12.
13.
We can start with probing for (PCI) I2C or SMBus adapters.
14.
Do you want to probe now? (YES/no): y
15.
Probing for PCI bus adapters...
16.
Use driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9
17.
18.
We will now try to load each adapter module in turn.
19.
Load `i2c-i801' (say NO if built into your kernel)? (YES/no): y
20.
Module loaded successfully.
21.
If you have undetectable or unsupported I2C/SMBus adapters, you can have
22.
them scanned by manually loading the modules before running this script.
23.
24.
To continue, we need module `i2c-dev' to be loaded.
25.
Do you want to load `i2c-dev' now? (YES/no): y
26.
Module loaded successfully.
27.
28.
We are now going to do the I2C/SMBus adapter probings. Some chips may
29.
be double detected; we choose the one with the highest confidence
30.
value in that case.
31.
If you found that the adapter hung after probing a certain address,
32.
you can specify that address to remain unprobed.
33.
34.
Next adapter: NVIDIA i2c adapter (i2c-0)
35.
Do you want to scan it? (YES/no/selectively): y
36.
37.
Next adapter: NVIDIA i2c adapter (i2c-1)
38.
Do you want to scan it? (YES/no/selectively): y
39.
Client found at address 0x50
40.
Probing for `Analog Devices ADM1033'... No
41.
Probing for `Analog Devices ADM1034'... No
42.
Probing for `SPD EEPROM'... No
43.
Probing for `EDID EEPROM'... Yes
44.
(confidence 8, not a hardware monitoring chip)
45.
46.
Next adapter: NVIDIA i2c adapter (i2c-2)
47.
Do you want to scan it? (YES/no/selectively): y
48.
49.
Next adapter: NVIDIA i2c adapter (i2c-3)
50.
Do you want to scan it? (YES/no/selectively): y
51.
Client found at address 0x2e
52.
Probing for `Myson MTP008'... No
53.
Probing for `National Semiconductor LM78'... No
54.
Probing for `National Semiconductor LM78-J'... No
55.
Probing for `National Semiconductor LM79'... No
56.
Probing for `National Semiconductor LM80'... No
57.
Probing for `National Semiconductor LM85 or LM96000'... No
58.
Probing for `Analog Devices ADM1027, ADT7460 or ADT7463'... No
59.
Probing for `SMSC EMC6D100, EMC6D101 or EMC6D102'... No
60.
Probing for `Analog Devices ADT7462'... No
61.
Probing for `Analog Devices ADT7467 or ADT7468'... No
62.
Probing for `Analog Devices ADT7470'... No
63.
Probing for `Analog Devices ADT7473'... Success!
64.
(confidence 5, driver `to-be-written')
65.
Probing for `Analog Devices ADT7475'... No
66.
Probing for `Analog Devices ADT7476'... No
67.
Probing for `Andigilog aSC7611'... No
68.
Probing for `Andigilog aSC7621'... No
69.
Probing for `National Semiconductor LM87'... No
70.
Probing for `National Semiconductor LM93'... No
71.
Probing for `Winbond W83781D'... No
72.
Probing for `Winbond W83782D'... No
73.
Probing for `Winbond W83792D'... No
74.
Probing for `Winbond W83793R/G'... No
75.
Probing for `Winbond W83791SD'... No
76.
Probing for `Winbond W83627HF'... No
77.
Probing for `Winbond W83627EHF'... No
78.
Probing for `Winbond W83627DHG'... No
79.
Probing for `Asus AS99127F (rev.1)'... No
80.
Probing for `Asus AS99127F (rev.2)'... No
81.
Probing for `Asus ASB100 Bach'... No
82.
Probing for `Winbond W83L786NR/NG/R/G'... No
83.
Probing for `Winbond W83L785TS-S'... No
84.
Probing for `Analog Devices ADM9240'... No
85.
Probing for `Dallas Semiconductor DS1780'... No
86.
Probing for `National Semiconductor LM81'... No
87.
Probing for `Analog Devices ADM1026'... No
88.
Probing for `Analog Devices ADM1025'... No
89.
Probing for `Analog Devices ADM1029'... No
90.
Probing for `Analog Devices ADM1030'... No
91.
Probing for `Analog Devices ADM1031'... No
92.
Probing for `Analog Devices ADM1022'... No
93.
Probing for `Texas Instruments THMC50'... No
94.
Probing for `Analog Devices ADM1028'... No
95.
Probing for `ITE IT8712F'... No
96.
Probing for `SMSC DME1737'... No
97.
Probing for `SMSC SCH5027D-NW'... No
98.
Probing for `Fintek F75373S/SG'... No
99.
Probing for `Fintek F75375S/SP'... No
100.
Probing for `Fintek F75387SG/RG'... No
101.
Probing for `Analog Devices ADM1024'... No
102.
Probing for `Winbond W83791D'... No
103.
104.
Next adapter: SMBus I801 adapter at 0400 (i2c-4)
105.
Do you want to scan it? (YES/no/selectively): y
106.
Client found at address 0x50
107.
Probing for `Analog Devices ADM1033'... No
108.
Probing for `Analog Devices ADM1034'... No
109.
Probing for `SPD EEPROM'... yYes
110.
(confidence 8, not a hardware monitoring chip)
111.
Probing for `EDID EEPROM'... No
112.
Client found at address 0x51
113.
Probing for `Analog Devices ADM1033'... No
114.
Probing for `Analog Devices ADM1034'... No
115.
Probing for `SPD EEPROM'... Yes
116.
(confidence 8, not a hardware monitoring chip)
117.
Probing for `EDID EEPROM'... No
118.
Client found at address 0x52
119.
Probing for `Analog Devices ADM1033'... No
120.
Probing for `Analog Devices ADM1034'... No
121.
Probing for `SPD EEPROM'... Yes
122.
(confidence 8, not a hardware monitoring chip)
123.
Probing for `EDID EEPROM'... No
124.
125.
Some chips are also accessible through the ISA I/O ports. We have to
126.
write to arbitrary I/O ports to probe them. This is usually safe though.
127.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
128.
Do you want to scan the ISA I/O ports? (YES/no): y
129.
Probing for `National Semiconductor LM78' at 0x290... No
130.
Probing for `National Semiconductor LM78-J' at 0x290... No
131.
Probing for `National Semiconductor LM79' at 0x290... No
132.
Probing for `Winbond W83781D' at 0x290... No
133.
Probing for `Winbond W83782D' at 0x290... No
134.
Probing for `IPMI BMC KCS' at 0xca0... No
135.
Probing for `IPMI BMC SMIC' at 0xca8... No
136.
137.
Some Super I/O chips may also contain sensors. We have to write to
138.
standard I/O ports to probe them. This is usually safe.
139.
Do you want to scan for Super I/O sensors? (YES/no): y
140.
Probing for Super-I/O at 0x2e/0x2f
141.
Trying family `National Semiconductor'... No
142.
Trying family `SMSC'... No
143.
Trying family `VIA/Winbond/Fintek'... Yes
144.
Found `Winbond W83627DHG Super IO Sensors' Success!
145.
(address 0x290, driver `w83627ehf')
146.
Probing for Super-I/O at 0x4e/0x4f
147.
Trying family `National Semiconductor'... No
148.
Trying family `SMSC'... No
149.
Trying family `VIA/Winbond/Fintek'... No
150.
Trying family `ITE'... No
151.
152.
Some south bridges, CPUs or memory controllers may also contain
153.
embedded sensors. Do you want to scan for them? (YES/no): y
154.
Silicon Integrated Systems SIS5595... No
155.
VIA VT82C686 Integrated Sensors... No
156.
VIA VT8231 Integrated Sensors... No
157.
AMD K8 thermal sensors... No
158.
AMD K10 thermal sensors... No
159.
Intel Core family thermal sensor... Success!
160.
(driver `coretemp')
161.
Intel AMB FB-DIMM thermal sensor... No
162.
163.
Now follows a summary of the probes I have just done.
164.
Just press ENTER to continue:
165.
166.
Driver `to-be-written' (should be inserted):
167.
Detects correctly:
168.
* Bus `NVIDIA i2c adapter '
169.
Busdriver `UNKNOWN', I2C address 0x2e
170.
Chip `Analog Devices ADT7473' (confidence: 5)
171.
172.
Driver `w83627ehf' (should be inserted):
173.
Detects correctly:
174.
* ISA bus, address 0x290
175.
Chip `Winbond W83627DHG Super IO Sensors' (confidence: 9)
176.
177.
Driver `coretemp' (should be inserted):
178.
Detects correctly:
179.
* Chip `Intel Core family thermal sensor' (confidence: 9)
180.
181.
I will now generate the commands needed to load the required modules.
182.
Just press ENTER to continue:
183.
184.
To load everything that is needed, add this to /etc/modules:
185.
186.
#----cut here----
187.
# I2C adapter drivers
188.
# modprobe unknown adapter NVIDIA i2c adapter
189.
# modprobe unknown adapter NVIDIA i2c adapter
190.
# modprobe unknown adapter NVIDIA i2c adapter
191.
# modprobe unknown adapter NVIDIA i2c adapter
192.
# Chip drivers
193.
# no driver for Analog Devices ADT7473 yet
194.
w83627ehf
195.
coretemp
196.
#----cut here----
197.
198.
Do you want to add these lines automatically? (yes/NO)y
------------------------------------------------------------------------------------------------------------------------------------------------------------
här är min modules config -->
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
loop
lp
sbp2
fuse
it87
i2c-viapro
i2c-isa
psmouse
mousedev
ide-cd
ide-disk
ide-generic
lp
# Generated by sensors-detect on Sun Jan 18 19:14:46 2009
# I2C adapter drivers
# modprobe unknown adapter NVIDIA i2c adapter
# modprobe unknown adapter NVIDIA i2c adapter
# modprobe unknown adapter NVIDIA i2c adapter
# modprobe unknown adapter NVIDIA i2c adapter
# Chip drivers
# no driver for Analog Devices ADT7473 yet
coretemps
w83627ehf
# Generated by sensors-detect on Sun Jan 18 19:48:09 2009
# I2C adapter drivers
# modprobe unknown adapter NVIDIA i2c adapter
# modprobe unknown adapter NVIDIA i2c adapter
# modprobe unknown adapter NVIDIA i2c adapter
# modprobe unknown adapter NVIDIA i2c adapter
# Chip drivers
# no driver for Analog Devices ADT7473 yet
w83627ehf
coretemp
snälla hjälp mig ,
jag är en fetnybörjare så behöver en riktigt läsvänlig förklaring
sedan när jag kör -> sudo modprobe i2c-sensor så får jag detta meddelande
FATAL: Module i2c_sensor not found.
den övre del är detect skiten den undre är hela min modules config
1.
daniel@dapeamel:/etc$ sensors-detect
2.
You need to be root to run this script.
3.
daniel@dapeamel:/etc$ sudo bash
4.
[sudo] password for daniel:
5.
senroot@dapeamel:/etc# sensors-detect
6.
# sensors-detect revision 5249 (2008-05-11 22:56:25 +0200)
7.
8.
This program will help you determine which kernel modules you need
9.
to load to use lm_sensors most effectively. It is generally safe
10.
and recommended to accept the default answers to all questions,
11.
unless you know what you're doing.
12.
13.
We can start with probing for (PCI) I2C or SMBus adapters.
14.
Do you want to probe now? (YES/no): y
15.
Probing for PCI bus adapters...
16.
Use driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9
17.
18.
We will now try to load each adapter module in turn.
19.
Load `i2c-i801' (say NO if built into your kernel)? (YES/no): y
20.
Module loaded successfully.
21.
If you have undetectable or unsupported I2C/SMBus adapters, you can have
22.
them scanned by manually loading the modules before running this script.
23.
24.
To continue, we need module `i2c-dev' to be loaded.
25.
Do you want to load `i2c-dev' now? (YES/no): y
26.
Module loaded successfully.
27.
28.
We are now going to do the I2C/SMBus adapter probings. Some chips may
29.
be double detected; we choose the one with the highest confidence
30.
value in that case.
31.
If you found that the adapter hung after probing a certain address,
32.
you can specify that address to remain unprobed.
33.
34.
Next adapter: NVIDIA i2c adapter (i2c-0)
35.
Do you want to scan it? (YES/no/selectively): y
36.
37.
Next adapter: NVIDIA i2c adapter (i2c-1)
38.
Do you want to scan it? (YES/no/selectively): y
39.
Client found at address 0x50
40.
Probing for `Analog Devices ADM1033'... No
41.
Probing for `Analog Devices ADM1034'... No
42.
Probing for `SPD EEPROM'... No
43.
Probing for `EDID EEPROM'... Yes
44.
(confidence 8, not a hardware monitoring chip)
45.
46.
Next adapter: NVIDIA i2c adapter (i2c-2)
47.
Do you want to scan it? (YES/no/selectively): y
48.
49.
Next adapter: NVIDIA i2c adapter (i2c-3)
50.
Do you want to scan it? (YES/no/selectively): y
51.
Client found at address 0x2e
52.
Probing for `Myson MTP008'... No
53.
Probing for `National Semiconductor LM78'... No
54.
Probing for `National Semiconductor LM78-J'... No
55.
Probing for `National Semiconductor LM79'... No
56.
Probing for `National Semiconductor LM80'... No
57.
Probing for `National Semiconductor LM85 or LM96000'... No
58.
Probing for `Analog Devices ADM1027, ADT7460 or ADT7463'... No
59.
Probing for `SMSC EMC6D100, EMC6D101 or EMC6D102'... No
60.
Probing for `Analog Devices ADT7462'... No
61.
Probing for `Analog Devices ADT7467 or ADT7468'... No
62.
Probing for `Analog Devices ADT7470'... No
63.
Probing for `Analog Devices ADT7473'... Success!
64.
(confidence 5, driver `to-be-written')
65.
Probing for `Analog Devices ADT7475'... No
66.
Probing for `Analog Devices ADT7476'... No
67.
Probing for `Andigilog aSC7611'... No
68.
Probing for `Andigilog aSC7621'... No
69.
Probing for `National Semiconductor LM87'... No
70.
Probing for `National Semiconductor LM93'... No
71.
Probing for `Winbond W83781D'... No
72.
Probing for `Winbond W83782D'... No
73.
Probing for `Winbond W83792D'... No
74.
Probing for `Winbond W83793R/G'... No
75.
Probing for `Winbond W83791SD'... No
76.
Probing for `Winbond W83627HF'... No
77.
Probing for `Winbond W83627EHF'... No
78.
Probing for `Winbond W83627DHG'... No
79.
Probing for `Asus AS99127F (rev.1)'... No
80.
Probing for `Asus AS99127F (rev.2)'... No
81.
Probing for `Asus ASB100 Bach'... No
82.
Probing for `Winbond W83L786NR/NG/R/G'... No
83.
Probing for `Winbond W83L785TS-S'... No
84.
Probing for `Analog Devices ADM9240'... No
85.
Probing for `Dallas Semiconductor DS1780'... No
86.
Probing for `National Semiconductor LM81'... No
87.
Probing for `Analog Devices ADM1026'... No
88.
Probing for `Analog Devices ADM1025'... No
89.
Probing for `Analog Devices ADM1029'... No
90.
Probing for `Analog Devices ADM1030'... No
91.
Probing for `Analog Devices ADM1031'... No
92.
Probing for `Analog Devices ADM1022'... No
93.
Probing for `Texas Instruments THMC50'... No
94.
Probing for `Analog Devices ADM1028'... No
95.
Probing for `ITE IT8712F'... No
96.
Probing for `SMSC DME1737'... No
97.
Probing for `SMSC SCH5027D-NW'... No
98.
Probing for `Fintek F75373S/SG'... No
99.
Probing for `Fintek F75375S/SP'... No
100.
Probing for `Fintek F75387SG/RG'... No
101.
Probing for `Analog Devices ADM1024'... No
102.
Probing for `Winbond W83791D'... No
103.
104.
Next adapter: SMBus I801 adapter at 0400 (i2c-4)
105.
Do you want to scan it? (YES/no/selectively): y
106.
Client found at address 0x50
107.
Probing for `Analog Devices ADM1033'... No
108.
Probing for `Analog Devices ADM1034'... No
109.
Probing for `SPD EEPROM'... yYes
110.
(confidence 8, not a hardware monitoring chip)
111.
Probing for `EDID EEPROM'... No
112.
Client found at address 0x51
113.
Probing for `Analog Devices ADM1033'... No
114.
Probing for `Analog Devices ADM1034'... No
115.
Probing for `SPD EEPROM'... Yes
116.
(confidence 8, not a hardware monitoring chip)
117.
Probing for `EDID EEPROM'... No
118.
Client found at address 0x52
119.
Probing for `Analog Devices ADM1033'... No
120.
Probing for `Analog Devices ADM1034'... No
121.
Probing for `SPD EEPROM'... Yes
122.
(confidence 8, not a hardware monitoring chip)
123.
Probing for `EDID EEPROM'... No
124.
125.
Some chips are also accessible through the ISA I/O ports. We have to
126.
write to arbitrary I/O ports to probe them. This is usually safe though.
127.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
128.
Do you want to scan the ISA I/O ports? (YES/no): y
129.
Probing for `National Semiconductor LM78' at 0x290... No
130.
Probing for `National Semiconductor LM78-J' at 0x290... No
131.
Probing for `National Semiconductor LM79' at 0x290... No
132.
Probing for `Winbond W83781D' at 0x290... No
133.
Probing for `Winbond W83782D' at 0x290... No
134.
Probing for `IPMI BMC KCS' at 0xca0... No
135.
Probing for `IPMI BMC SMIC' at 0xca8... No
136.
137.
Some Super I/O chips may also contain sensors. We have to write to
138.
standard I/O ports to probe them. This is usually safe.
139.
Do you want to scan for Super I/O sensors? (YES/no): y
140.
Probing for Super-I/O at 0x2e/0x2f
141.
Trying family `National Semiconductor'... No
142.
Trying family `SMSC'... No
143.
Trying family `VIA/Winbond/Fintek'... Yes
144.
Found `Winbond W83627DHG Super IO Sensors' Success!
145.
(address 0x290, driver `w83627ehf')
146.
Probing for Super-I/O at 0x4e/0x4f
147.
Trying family `National Semiconductor'... No
148.
Trying family `SMSC'... No
149.
Trying family `VIA/Winbond/Fintek'... No
150.
Trying family `ITE'... No
151.
152.
Some south bridges, CPUs or memory controllers may also contain
153.
embedded sensors. Do you want to scan for them? (YES/no): y
154.
Silicon Integrated Systems SIS5595... No
155.
VIA VT82C686 Integrated Sensors... No
156.
VIA VT8231 Integrated Sensors... No
157.
AMD K8 thermal sensors... No
158.
AMD K10 thermal sensors... No
159.
Intel Core family thermal sensor... Success!
160.
(driver `coretemp')
161.
Intel AMB FB-DIMM thermal sensor... No
162.
163.
Now follows a summary of the probes I have just done.
164.
Just press ENTER to continue:
165.
166.
Driver `to-be-written' (should be inserted):
167.
Detects correctly:
168.
* Bus `NVIDIA i2c adapter '
169.
Busdriver `UNKNOWN', I2C address 0x2e
170.
Chip `Analog Devices ADT7473' (confidence: 5)
171.
172.
Driver `w83627ehf' (should be inserted):
173.
Detects correctly:
174.
* ISA bus, address 0x290
175.
Chip `Winbond W83627DHG Super IO Sensors' (confidence: 9)
176.
177.
Driver `coretemp' (should be inserted):
178.
Detects correctly:
179.
* Chip `Intel Core family thermal sensor' (confidence: 9)
180.
181.
I will now generate the commands needed to load the required modules.
182.
Just press ENTER to continue:
183.
184.
To load everything that is needed, add this to /etc/modules:
185.
186.
#----cut here----
187.
# I2C adapter drivers
188.
# modprobe unknown adapter NVIDIA i2c adapter
189.
# modprobe unknown adapter NVIDIA i2c adapter
190.
# modprobe unknown adapter NVIDIA i2c adapter
191.
# modprobe unknown adapter NVIDIA i2c adapter
192.
# Chip drivers
193.
# no driver for Analog Devices ADT7473 yet
194.
w83627ehf
195.
coretemp
196.
#----cut here----
197.
198.
Do you want to add these lines automatically? (yes/NO)y
------------------------------------------------------------------------------------------------------------------------------------------------------------
här är min modules config -->
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
loop
lp
sbp2
fuse
it87
i2c-viapro
i2c-isa
psmouse
mousedev
ide-cd
ide-disk
ide-generic
lp
# Generated by sensors-detect on Sun Jan 18 19:14:46 2009
# I2C adapter drivers
# modprobe unknown adapter NVIDIA i2c adapter
# modprobe unknown adapter NVIDIA i2c adapter
# modprobe unknown adapter NVIDIA i2c adapter
# modprobe unknown adapter NVIDIA i2c adapter
# Chip drivers
# no driver for Analog Devices ADT7473 yet
coretemps
w83627ehf
# Generated by sensors-detect on Sun Jan 18 19:48:09 2009
# I2C adapter drivers
# modprobe unknown adapter NVIDIA i2c adapter
# modprobe unknown adapter NVIDIA i2c adapter
# modprobe unknown adapter NVIDIA i2c adapter
# modprobe unknown adapter NVIDIA i2c adapter
# Chip drivers
# no driver for Analog Devices ADT7473 yet
w83627ehf
coretemp
snälla hjälp mig ,
jag är en fetnybörjare så behöver en riktigt läsvänlig förklaring