Hejsan forumet!
Är relativt ny med Ubuntu, har kört lite Linux innan, andra smaker dock.
Nå, jag vill spela in mitt gitarrplågande i Linux på samma sätt som jag gör med Sonar Cakewalk i WinXP samt använda min VoX Tonelab (har spdif, midi och vanlig analog utgång).
Fick hjälp av en mycket kompetent kompis att kompilera drivarna för 0404'an och allt funkade, en stund........
Är ganska, inte helt, säker på att jag har ändrat några inställningar som gör att det blivit stumt.
I Alsamixer kan jag se en jä... massa reglage för inställningar av bas, diskant, pcm osv.
lspci | grep -i audio ger
anders@anders-desktop:~$ lspci | grep -i audio
05:00.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
anders@anders-desktop:~$
cat /proc/asound/modules ger
anders@anders-desktop:~$ cat /proc/asound/modules
0 snd_emu10k1
anders@anders-desktop:~$
cat /proc/asound/cards ger:
anders@anders-desktop:~$ cat /proc/asound/cards
0 [EMU0404 ]: Audigy2 - E-mu 0404b [4002]
E-mu 0404b [4002] (rev.0, serial:0x40021102) at 0xd000, irq 22
anders@anders-desktop:~$
lsmod | grep snd ger:
anders@anders-desktop:~$ lsmod | grep snd
snd_emu10k1_synth 8064 0
snd_emux_synth 36224 1 snd_emu10k1_synth
snd_seq_virmidi 8192 1 snd_emux_synth
snd_seq_midi_emul 7552 1 snd_emux_synth
snd_emu10k1 146880 3 snd_emu10k1_synth
snd_ac97_codec 101028 1 snd_emu10k1
ac97_bus 3072 1 snd_ac97_codec
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
snd_pcm 78596 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 11400 2 snd_emu10k1,snd_pcm
snd_util_mem 5632 2 snd_emux_synth,snd_emu10k1
snd_hwdep 10500 2 snd_emux_synth,snd_emu10k1
snd_seq_dummy 4868 0
snd_seq_oss 35584 0
snd_seq_midi 9376 0
snd_rawmidi 25760 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
snd_seq_midi_event 8320 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_seq 54224 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24836 3 snd_emu10k1,snd_pcm,snd_seq
snd_seq_device 9612 8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 56996 18 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 8800 1 snd
anders@anders-desktop:~$
asoundconf list ger:
anders@anders-desktop:~$ asoundconf list
Names of available sound cards:
EMU0404
anders@anders-desktop:~$
Så vitt jag fattar ser ju allt detta bra ut (och lät väldigt bra så länge det varade). Det är extremt frustrerande att ha haft ljud som i mina öron lät bättre än i Windows (klarare, renare).
Alla tips om hur jag skall lösa detta mottages med största tacksamhet. Vill lämna Windowsvärlden och köra mitt inspelande i Linux om det är möjligt.
En fråga till bara; hur lägger jag in bilder i mina inlägg.Tog en fin på Alsamixer som jag gärna hade visat er....
Lev väl alla.
Anders
/FoX
Ljud i 8.04 med E-mu0404
Re: Ljud i 8.04 med E-mu0404
Jo jag kör också med en Audigy krets och problemet är "buggar".... flera av dom.
Den här tråden reder ut läget
http://ubuntuforums.org/showthread.php?p=4928900
Eftersom du tycker om ljud så gör hela guiden, part A-D.
Sedan bör du även kolla in Ubuntu-Studios paket
https://wiki.ubuntu.com/UbuntuStudio
Nu måste du sedan ängna lite tid åt wikin men audiometapaketet är nog en höjdare för en musiker.
så får du rubbet. Läs hela paketbeskrivningen inkl rekommendationer
https://wiki.ubuntu.com/UbuntuStudio/PackageList
Efter det har du nog en höjdar-PC för musik....
Den här tråden reder ut läget
http://ubuntuforums.org/showthread.php?p=4928900
Eftersom du tycker om ljud så gör hela guiden, part A-D.
Sedan bör du även kolla in Ubuntu-Studios paket
https://wiki.ubuntu.com/UbuntuStudio
Nu måste du sedan ängna lite tid åt wikin men audiometapaketet är nog en höjdare för en musiker.
Kod: Markera allt
sudo apt-get install ubuntustudio-audiohttps://wiki.ubuntu.com/UbuntuStudio/PackageList
Efter det har du nog en höjdar-PC för musik....
Re: Ljud i 8.04 med E-mu0404
Hejsan igen!
Tack Pun för ditt extremt snabba svar! ; )
Pulse audio är inte ett alternativ i sammanhanget vad jag förstått av min kompis som hjälpte mig. Det var en av problemkällorna!!!!
Däremot provar jag gärna Studio ; )
Så min första fråga kvarstår...... Varför lade ljudet av och hur fixar jag det igen. Ska läsa vidare......
See ya'
/FoX
Tack Pun för ditt extremt snabba svar! ; )
Pulse audio är inte ett alternativ i sammanhanget vad jag förstått av min kompis som hjälpte mig. Det var en av problemkällorna!!!!
Däremot provar jag gärna Studio ; )
Så min första fråga kvarstår...... Varför lade ljudet av och hur fixar jag det igen. Ska läsa vidare......
See ya'
/FoX
Re: Ljud i 8.04 med E-mu0404
PulseAudio har du redan och det är det som buggar.
Guiden är enkel för den som pillrat förut.
Sen får du nya PulseAudio GUIs som Ubuntu tyvärr gömde undan.
Equalizer blir även igång
"Bara att bita ihop och just do it".....
Guiden är enkel för den som pillrat förut.
Sen får du nya PulseAudio GUIs som Ubuntu tyvärr gömde undan.
Equalizer blir även igång
"Bara att bita ihop och just do it".....
Re: Ljud i 8.04 med E-mu0404
Hej igen!
Nej, vi avinstallerade pulse audio just för att det är en problemkälla.
Det var efter detta de installerade om Alsa från grunden och fick ljudet att funka, kort......
Mvh
Anders.L
/FoX
Nej, vi avinstallerade pulse audio just för att det är en problemkälla.
Det var efter detta de installerade om Alsa från grunden och fick ljudet att funka, kort......
Mvh
Anders.L
/FoX
-
CryingFreeman
- Inlägg: 2817
- Blev medlem: 29 aug 2007, 22:32
- OS: Ubuntu
- Utgåva: 22.04 Jammy Jellyfish LTS
- Ort: Östersund
Re: Ljud i 8.04 med E-mu0404
Kan du posta outout av kommandot
? Gör det gärna inom
[/code]
så blir det lättare att läsa.
Kod: Markera allt
dmesgKod: Markera allt
[code]så blir det lättare att läsa.
Re: Ljud i 8.04 med E-mu0404
Jo problemet är ju ett firmware som är för dåligt och kompilerar man om så ska det bara funkaswefox skrev:Hej igen!
Nej, vi avinstallerade pulse audio just för att det är en problemkälla.
Det var efter detta de installerade om Alsa från grunden och fick ljudet att funka, kort......
Mvh
Anders.L
/FoX
Har du satt kortet som default ?
Kod: Markera allt
sudo asoundconf set-default-card EMU0404huvudsaken är att man vet vad man gjort eftersom det är standard.
Vad ger en
Kod: Markera allt
dmesg | grep emuKontrollera även Meny System> Inställningar > Ljud
Sen ansluter man då någonting så här via Jack
http://chrisatlinux.wordpress.com/2008/ ... ith-linux/
Och Ardour osv enligt wikin tidigare från Ubuntustudio.
Re: Ljud i 8.04 med E-mu0404
Hej igen..... Verkar få dela upp svaret, för många tecken....
ok, here goes...
dmesg ger (mycket):
[ 35.801891] EISA: Probing bus 0 at eisa.0
[ 35.801916] EISA: Detected 0 cards.
[ 35.801918] cpuidle: using governor ladder
[ 35.801920] cpuidle: using governor menu
[ 35.801980] NET: Registered protocol family 1
[ 35.802006] Using IPI No-Shortcut mode
[ 35.802022] registered taskstats version 1
[ 35.802089] Magic number: 4:168:683
[ 35.802115] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 35.802116] EDD information not available.
[ 35.802216] Freeing unused kernel memory: 368k freed
[ 35.820205] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 36.951180] fuse init (API version 7.9)
[ 36.976885] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 36.976957] ACPI: SSDT DFEE8300, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
[ 36.977040] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 36.977048] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 36.977054] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 37.105003] usbcore: registered new interface driver usbfs
[ 37.105015] usbcore: registered new interface driver hub
[ 37.124477] usbcore: registered new device driver usb
[ 37.149880] USB Universal Host Controller Interface driver v3.0
[ 37.149913] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 37.149920] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 37.149922] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 37.150057] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 37.150079] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 37.150153] usb usb1: configuration #1 chosen from 1 choice
[ 37.150165] hub 1-0:1.0: USB hub found
[ 37.150168] hub 1-0:1.0: 2 ports detected
[ 37.244407] SCSI subsystem initialized
[ 37.253347] ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 18
[ 37.253354] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 37.253357] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 37.253373] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 37.253393] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e100
[ 37.253455] usb usb2: configuration #1 chosen from 1 choice
[ 37.253468] hub 2-0:1.0: USB hub found
[ 37.253470] hub 2-0:1.0: 2 ports detected
[ 37.301315] libata version 3.00 loaded.
[ 37.357239] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 37.357247] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 37.357249] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 37.357262] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 37.357282] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e500
[ 37.357342] usb usb3: configuration #1 chosen from 1 choice
[ 37.357355] hub 3-0:1.0: USB hub found
[ 37.357357] hub 3-0:1.0: 2 ports detected
[ 37.461135] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 37.461142] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 37.461144] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 37.461157] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 37.461177] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e200
[ 37.461238] usb usb4: configuration #1 chosen from 1 choice
[ 37.461252] hub 4-0:1.0: USB hub found
[ 37.461254] hub 4-0:1.0: 2 ports detected
[ 37.493052] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 37.564057] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 21
[ 37.564064] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 37.564068] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 37.564084] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 37.564106] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000e300
[ 37.564191] usb usb5: configuration #1 chosen from 1 choice
[ 37.564210] hub 5-0:1.0: USB hub found
[ 37.564213] hub 5-0:1.0: 2 ports detected
[ 37.660663] usb 1-2: configuration #1 chosen from 1 choice
[ 37.668936] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 37.668942] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 37.668945] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 37.668963] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 37.668982] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000e400
[ 37.669065] usb usb6: configuration #1 chosen from 1 choice
[ 37.669083] hub 6-0:1.0: USB hub found
[ 37.669087] hub 6-0:1.0: 2 ports detected
[ 37.772930] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19
[ 37.772938] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 37.772941] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 37.772959] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 37.776857] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 37.776860] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfa201000
[ 37.792751] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 37.792814] usb usb7: configuration #1 chosen from 1 choice
[ 37.792829] hub 7-0:1.0: USB hub found
[ 37.792832] hub 7-0:1.0: 6 ports detected
[ 37.895721] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 37.895729] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 37.895732] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 37.895750] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 37.899633] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 37.899636] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfa200000
[ 37.911637] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 37.911710] usb usb8: configuration #1 chosen from 1 choice
[ 37.911729] hub 8-0:1.0: USB hub found
[ 37.911733] hub 8-0:1.0: 6 ports detected
[ 37.916692] usbcore: registered new interface driver hiddev
[ 37.916694] usb 1-2: USB disconnect, address 2
[ 38.016612] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 38.016629] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 38.016643] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 38.016862] eth0: RTL8168b/8111b at 0xf8864000, 00:1a:4d:53:40:59, XID 38000000 IRQ 219
[ 38.017937] ahci 0000:03:00.0: version 3.0
[ 38.017954] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 38.467082] usb 7-4: new high speed USB device using ehci_hcd and address 3
[ 38.600306] usb 7-4: configuration #1 chosen from 1 choice
[ 38.600500] hub 7-4:1.0: USB hub found
[ 38.600731] hub 7-4:1.0: 4 ports detected
[ 38.702930] usbcore: registered new interface driver usbhid
[ 38.702933] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 39.019556] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 39.019559] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 39.019565] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 39.019670] scsi0 : ahci
[ 39.019789] scsi1 : ahci
[ 39.019823] ata1: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000100 irq 16
[ 39.019826] ata2: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000180 irq 16
[ 39.087761] usb 7-4.2: new full speed USB device using ehci_hcd and address 4
[ 39.191722] usb 7-4.2: configuration #1 chosen from 1 choice
[ 39.338229] ata1: SATA link down (SStatus 0 SControl 300)
[ 39.398458] usb 7-4.4: new full speed USB device using ehci_hcd and address 5
[ 39.497923] usb 7-4.4: configuration #1 chosen from 1 choice
[ 39.504798] usbcore: registered new interface driver libusual
[ 39.509266] Initializing USB Mass Storage driver...
[ 39.509302] scsi2 : SCSI emulation for USB Mass Storage devices
[ 39.509345] usb-storage: device found at 4
[ 39.509346] usb-storage: waiting for device to settle before scanning
[ 39.509358] scsi3 : SCSI emulation for USB Mass Storage devices
[ 39.509386] usbcore: registered new interface driver usb-storage
[ 39.509388] USB Mass Storage support registered.
[ 39.509420] usb-storage: device found at 5
[ 39.509421] usb-storage: waiting for device to settle before scanning
[ 39.657909] ata2: SATA link down (SStatus 0 SControl 300)
[ 39.657965] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 21
[ 39.657989] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 39.657998] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 39.658014] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 19 (level, low) -> IRQ 21
[ 39.658029] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 39.658038] ACPI: PCI interrupt for device 0000:00:1f.5 disabled
[ 39.658059] PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
[ 39.658063] ACPI: PCI Interrupt 0000:03:00.1 -> GSI 17 (level, low) -> IRQ 17
[ 39.658083] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 39.658094] ACPI: PCI interrupt for device 0000:03:00.1 disabled
[ 39.658911] ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 39.708573] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fa104000-fa1047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 39.711407] ata_piix 0000:00:1f.2: version 2.12
[ 39.711410] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 39.711420] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 21
[ 39.711434] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 39.712215] scsi4 : ata_piix
[ 39.712574] scsi5 : ata_piix
[ 39.712905] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 39.712906] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 39.906818] ata3.00: HPA unlocked: 625140335 -> 625142448, native 625142448
[ 39.906823] ata3.00: ATA-7: Hitachi HDT725032VLA360, V54OA7EA, max UDMA/133
[ 39.906827] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 39.906953] ata3.01: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 39.906956] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 39.922994] ata3.00: configured for UDMA/133
[ 39.933911] ata3.01: configured for UDMA/133
[ 40.041523] usb 1-2: new low speed USB device using uhci_hcd and address 4
[ 40.210187] usb 1-2: configuration #1 chosen from 1 choice
[ 40.226193] input: USB Mouse STD. as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/input/input2
[ 40.250343] input,hidraw0: USB HID v1.00 Mouse [USB Mouse STD. ] on usb-0000:00:1a.0-2
[ 40.409317] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203N, SB01, max UDMA/100
[ 40.581165] ata4.00: configured for UDMA/100
[ 40.581252] scsi 4:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 40.581316] scsi 4:0:1:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 40.581957] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203N SB01 PQ: 0 ANSI: 5
[ 40.581995] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 40.582006] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 19 (level, low) -> IRQ 21
[ 40.582023] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 40.582042] scsi6 : ata_piix
[ 40.582064] scsi7 : ata_piix
[ 40.582311] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 21
[ 40.582312] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 21
[ 40.911298] ACPI: PCI Interrupt 0000:03:00.1 -> GSI 17 (level, low) -> IRQ 17
[ 40.911320] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 40.911431] scsi8 : pata_jmicron
[ 40.911876] scsi9 : pata_jmicron
[ 40.912159] ata7: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 17
[ 40.912161] ata8: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 17
[ 40.916885] Driver 'sd' needs updating - please use bus_type methods
[ 40.916924] sd 4:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 40.916931] sd 4:0:0:0: [sda] Write Protect is off
[ 40.916932] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 40.916941] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.916968] sd 4:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 40.916973] sd 4:0:0:0: [sda] Write Protect is off
[ 40.916975] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 40.916983] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.916985] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 40.932244] sda1 sda2 < sda5 sda6 sda7 >
[ 40.967457] sd 4:0:0:0: [sda] Attached SCSI disk
[ 40.967496] sd 4:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 40.967505] sd 4:0:1:0: [sdb] Write Protect is off
[ 40.967507] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.967520] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.967552] sd 4:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 40.967560] sd 4:0:1:0: [sdb] Write Protect is off
[ 40.967562] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.967574] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.967577] sdb:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c8661800001a4d]
[ 41.012899] sdb1 < sdb5 >
[ 41.022011] sd 4:0:1:0: [sdb] Attached SCSI disk
[ 41.025444] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 41.025455] sd 4:0:1:0: Attached scsi generic sg1 type 0
[ 41.025464] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 41.026091] sr0: scsi3-mmc drive: 40x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 41.026093] Uniform CD-ROM driver Revision: 3.20
[ 41.026116] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 41.110196] ata7.00: ATA-7: ST3250820A, 3.AAC, max UDMA/100
[ 41.110199] ata7.00: 488397168 sectors, multi 16: LBA48
[ 41.110209] ata7.00: limited to UDMA/33 due to 40-wire cable
[ 41.176626] ata7.00: configured for UDMA/33
[ 41.340687] scsi 8:0:0:0: Direct-Access ATA ST3250820A 3.AA PQ: 0 ANSI: 5
[ 41.340732] sd 8:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 41.340739] sd 8:0:0:0: [sdc] Write Protect is off
[ 41.340741] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 41.340750] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 41.340774] sd 8:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 41.340780] sd 8:0:0:0: [sdc] Write Protect is off
[ 41.340781] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 41.340790] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 41.340792] sdc: sdc1 sdc2
[ 41.357362] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 41.357383] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 41.376377] Attempting manual resume
[ 41.376379] swsusp: Resume From Partition 8:6
[ 41.376380] PM: Checking swsusp image.
[ 41.376484] PM: Resume from disk failed.
[ 41.380359] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[ 41.380362] ReiserFS: sda7: using ordered data mode
[ 41.393986] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 41.394176] ReiserFS: sda7: checking transaction log (sda7)
[ 41.418372] ReiserFS: sda7: Using r5 hash to sort names
[ 44.501489] usb-storage: device scan complete
[ 44.501990] scsi 3:0:0:0: Direct-Access Sony Eri Memory Stick 0000 PQ: 0 ANSI: 0
[ 44.502854] usb-storage: device scan complete
[ 44.504220] sd 3:0:0:0: [sdd] 1947648 512-byte hardware sectors (997 MB)
[ 44.505470] sd 3:0:0:0: [sdd] Write Protect is off
[ 44.505477] sd 3:0:0:0: [sdd] Mode Sense: 00 6a 00 00
[ 44.505479] sd 3:0:0:0: [sdd] Assuming drive cache: write through
[ 44.507466] sd 3:0:0:0: [sdd] 1947648 512-byte hardware sectors (997 MB)
[ 44.508591] sd 3:0:0:0: [sdd] Write Protect is off
[ 44.508594] sd 3:0:0:0: [sdd] Mode Sense: 00 6a 00 00
[ 44.508595] sd 3:0:0:0: [sdd] Assuming drive cache: write through
[ 44.508598] sdd: sdd1
[ 44.521229] sd 3:0:0:0: [sdd] Attached SCSI removable disk
[ 44.521257] sd 3:0:0:0: Attached scsi generic sg4 type 0
[ 44.717158] scsi 2:0:0:0: Direct-Access Motorola Motorola Phone 2.31 PQ: 0 ANSI: 2
[ 44.739742] sd 2:0:0:0: [sde] 990976 512-byte hardware sectors (507 MB)
[ 44.751106] sd 2:0:0:0: [sde] Write Protect is off
[ 44.751108] sd 2:0:0:0: [sde] Mode Sense: 0b 00 00 08
[ 44.751110] sd 2:0:0:0: [sde] Assuming drive cache: write through
[ 44.795687] sd 2:0:0:0: [sde] 990976 512-byte hardware sectors (507 MB)
[ 44.807051] sd 2:0:0:0: [sde] Write Protect is off
[ 44.807054] sd 2:0:0:0: [sde] Mode Sense: 0b 00 00 08
[ 44.807055] sd 2:0:0:0: [sde] Assuming drive cache: write through
[ 44.807058] sde: sde1
[ 44.839669] sd 2:0:0:0: [sde] Attached SCSI removable disk
[ 44.839695] sd 2:0:0:0: Attached scsi generic sg5 type 0
[ 48.296809] input: PC Speaker as /devices/platform/pcspkr/input/input3
Och, ja, EMU-kortet är default.
Så jä... frustrerande, jag hade det ju. Det lät bra. Allt var frid och fröjd, solen sken, fåglarna kvittrade, barnen var snälla (dream on....) Aaaaarrrrgh.
Vill få detta att funka, NU!
Tack för all input så här långt, uppskattas verkligen. Killen som hjälpte mig har ca 15 år unix/linux/terminalvana. Gjorde allt via remote desktop från Kalmar (jag bor i Göteborg). Kul att se menyerna samt terminal flasha förbi och sedan faktiskt få ljud. Men se'n känner ni ju storyn..
Anders.L
/FoX
ok, here goes...
dmesg ger (mycket):
[ 35.801891] EISA: Probing bus 0 at eisa.0
[ 35.801916] EISA: Detected 0 cards.
[ 35.801918] cpuidle: using governor ladder
[ 35.801920] cpuidle: using governor menu
[ 35.801980] NET: Registered protocol family 1
[ 35.802006] Using IPI No-Shortcut mode
[ 35.802022] registered taskstats version 1
[ 35.802089] Magic number: 4:168:683
[ 35.802115] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 35.802116] EDD information not available.
[ 35.802216] Freeing unused kernel memory: 368k freed
[ 35.820205] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 36.951180] fuse init (API version 7.9)
[ 36.976885] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 36.976957] ACPI: SSDT DFEE8300, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
[ 36.977040] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 36.977048] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 36.977054] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 37.105003] usbcore: registered new interface driver usbfs
[ 37.105015] usbcore: registered new interface driver hub
[ 37.124477] usbcore: registered new device driver usb
[ 37.149880] USB Universal Host Controller Interface driver v3.0
[ 37.149913] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 37.149920] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 37.149922] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 37.150057] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 37.150079] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 37.150153] usb usb1: configuration #1 chosen from 1 choice
[ 37.150165] hub 1-0:1.0: USB hub found
[ 37.150168] hub 1-0:1.0: 2 ports detected
[ 37.244407] SCSI subsystem initialized
[ 37.253347] ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 18
[ 37.253354] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 37.253357] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 37.253373] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 37.253393] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e100
[ 37.253455] usb usb2: configuration #1 chosen from 1 choice
[ 37.253468] hub 2-0:1.0: USB hub found
[ 37.253470] hub 2-0:1.0: 2 ports detected
[ 37.301315] libata version 3.00 loaded.
[ 37.357239] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 37.357247] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 37.357249] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 37.357262] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 37.357282] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e500
[ 37.357342] usb usb3: configuration #1 chosen from 1 choice
[ 37.357355] hub 3-0:1.0: USB hub found
[ 37.357357] hub 3-0:1.0: 2 ports detected
[ 37.461135] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 37.461142] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 37.461144] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 37.461157] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 37.461177] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e200
[ 37.461238] usb usb4: configuration #1 chosen from 1 choice
[ 37.461252] hub 4-0:1.0: USB hub found
[ 37.461254] hub 4-0:1.0: 2 ports detected
[ 37.493052] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 37.564057] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 21
[ 37.564064] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 37.564068] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 37.564084] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 37.564106] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000e300
[ 37.564191] usb usb5: configuration #1 chosen from 1 choice
[ 37.564210] hub 5-0:1.0: USB hub found
[ 37.564213] hub 5-0:1.0: 2 ports detected
[ 37.660663] usb 1-2: configuration #1 chosen from 1 choice
[ 37.668936] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 37.668942] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 37.668945] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 37.668963] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 37.668982] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000e400
[ 37.669065] usb usb6: configuration #1 chosen from 1 choice
[ 37.669083] hub 6-0:1.0: USB hub found
[ 37.669087] hub 6-0:1.0: 2 ports detected
[ 37.772930] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19
[ 37.772938] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 37.772941] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 37.772959] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 37.776857] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 37.776860] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfa201000
[ 37.792751] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 37.792814] usb usb7: configuration #1 chosen from 1 choice
[ 37.792829] hub 7-0:1.0: USB hub found
[ 37.792832] hub 7-0:1.0: 6 ports detected
[ 37.895721] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 37.895729] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 37.895732] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 37.895750] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 37.899633] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 37.899636] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfa200000
[ 37.911637] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 37.911710] usb usb8: configuration #1 chosen from 1 choice
[ 37.911729] hub 8-0:1.0: USB hub found
[ 37.911733] hub 8-0:1.0: 6 ports detected
[ 37.916692] usbcore: registered new interface driver hiddev
[ 37.916694] usb 1-2: USB disconnect, address 2
[ 38.016612] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 38.016629] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 38.016643] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 38.016862] eth0: RTL8168b/8111b at 0xf8864000, 00:1a:4d:53:40:59, XID 38000000 IRQ 219
[ 38.017937] ahci 0000:03:00.0: version 3.0
[ 38.017954] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 38.467082] usb 7-4: new high speed USB device using ehci_hcd and address 3
[ 38.600306] usb 7-4: configuration #1 chosen from 1 choice
[ 38.600500] hub 7-4:1.0: USB hub found
[ 38.600731] hub 7-4:1.0: 4 ports detected
[ 38.702930] usbcore: registered new interface driver usbhid
[ 38.702933] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 39.019556] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 39.019559] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 39.019565] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 39.019670] scsi0 : ahci
[ 39.019789] scsi1 : ahci
[ 39.019823] ata1: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000100 irq 16
[ 39.019826] ata2: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000180 irq 16
[ 39.087761] usb 7-4.2: new full speed USB device using ehci_hcd and address 4
[ 39.191722] usb 7-4.2: configuration #1 chosen from 1 choice
[ 39.338229] ata1: SATA link down (SStatus 0 SControl 300)
[ 39.398458] usb 7-4.4: new full speed USB device using ehci_hcd and address 5
[ 39.497923] usb 7-4.4: configuration #1 chosen from 1 choice
[ 39.504798] usbcore: registered new interface driver libusual
[ 39.509266] Initializing USB Mass Storage driver...
[ 39.509302] scsi2 : SCSI emulation for USB Mass Storage devices
[ 39.509345] usb-storage: device found at 4
[ 39.509346] usb-storage: waiting for device to settle before scanning
[ 39.509358] scsi3 : SCSI emulation for USB Mass Storage devices
[ 39.509386] usbcore: registered new interface driver usb-storage
[ 39.509388] USB Mass Storage support registered.
[ 39.509420] usb-storage: device found at 5
[ 39.509421] usb-storage: waiting for device to settle before scanning
[ 39.657909] ata2: SATA link down (SStatus 0 SControl 300)
[ 39.657965] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 21
[ 39.657989] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 39.657998] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 39.658014] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 19 (level, low) -> IRQ 21
[ 39.658029] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 39.658038] ACPI: PCI interrupt for device 0000:00:1f.5 disabled
[ 39.658059] PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
[ 39.658063] ACPI: PCI Interrupt 0000:03:00.1 -> GSI 17 (level, low) -> IRQ 17
[ 39.658083] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 39.658094] ACPI: PCI interrupt for device 0000:03:00.1 disabled
[ 39.658911] ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 39.708573] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fa104000-fa1047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 39.711407] ata_piix 0000:00:1f.2: version 2.12
[ 39.711410] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 39.711420] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 21
[ 39.711434] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 39.712215] scsi4 : ata_piix
[ 39.712574] scsi5 : ata_piix
[ 39.712905] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 39.712906] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 39.906818] ata3.00: HPA unlocked: 625140335 -> 625142448, native 625142448
[ 39.906823] ata3.00: ATA-7: Hitachi HDT725032VLA360, V54OA7EA, max UDMA/133
[ 39.906827] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 39.906953] ata3.01: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 39.906956] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 39.922994] ata3.00: configured for UDMA/133
[ 39.933911] ata3.01: configured for UDMA/133
[ 40.041523] usb 1-2: new low speed USB device using uhci_hcd and address 4
[ 40.210187] usb 1-2: configuration #1 chosen from 1 choice
[ 40.226193] input: USB Mouse STD. as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/input/input2
[ 40.250343] input,hidraw0: USB HID v1.00 Mouse [USB Mouse STD. ] on usb-0000:00:1a.0-2
[ 40.409317] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203N, SB01, max UDMA/100
[ 40.581165] ata4.00: configured for UDMA/100
[ 40.581252] scsi 4:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 40.581316] scsi 4:0:1:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 40.581957] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203N SB01 PQ: 0 ANSI: 5
[ 40.581995] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 40.582006] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 19 (level, low) -> IRQ 21
[ 40.582023] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 40.582042] scsi6 : ata_piix
[ 40.582064] scsi7 : ata_piix
[ 40.582311] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 21
[ 40.582312] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 21
[ 40.911298] ACPI: PCI Interrupt 0000:03:00.1 -> GSI 17 (level, low) -> IRQ 17
[ 40.911320] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 40.911431] scsi8 : pata_jmicron
[ 40.911876] scsi9 : pata_jmicron
[ 40.912159] ata7: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 17
[ 40.912161] ata8: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 17
[ 40.916885] Driver 'sd' needs updating - please use bus_type methods
[ 40.916924] sd 4:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 40.916931] sd 4:0:0:0: [sda] Write Protect is off
[ 40.916932] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 40.916941] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.916968] sd 4:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 40.916973] sd 4:0:0:0: [sda] Write Protect is off
[ 40.916975] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 40.916983] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.916985] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 40.932244] sda1 sda2 < sda5 sda6 sda7 >
[ 40.967457] sd 4:0:0:0: [sda] Attached SCSI disk
[ 40.967496] sd 4:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 40.967505] sd 4:0:1:0: [sdb] Write Protect is off
[ 40.967507] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.967520] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.967552] sd 4:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 40.967560] sd 4:0:1:0: [sdb] Write Protect is off
[ 40.967562] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.967574] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.967577] sdb:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c8661800001a4d]
[ 41.012899] sdb1 < sdb5 >
[ 41.022011] sd 4:0:1:0: [sdb] Attached SCSI disk
[ 41.025444] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 41.025455] sd 4:0:1:0: Attached scsi generic sg1 type 0
[ 41.025464] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 41.026091] sr0: scsi3-mmc drive: 40x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 41.026093] Uniform CD-ROM driver Revision: 3.20
[ 41.026116] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 41.110196] ata7.00: ATA-7: ST3250820A, 3.AAC, max UDMA/100
[ 41.110199] ata7.00: 488397168 sectors, multi 16: LBA48
[ 41.110209] ata7.00: limited to UDMA/33 due to 40-wire cable
[ 41.176626] ata7.00: configured for UDMA/33
[ 41.340687] scsi 8:0:0:0: Direct-Access ATA ST3250820A 3.AA PQ: 0 ANSI: 5
[ 41.340732] sd 8:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 41.340739] sd 8:0:0:0: [sdc] Write Protect is off
[ 41.340741] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 41.340750] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 41.340774] sd 8:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 41.340780] sd 8:0:0:0: [sdc] Write Protect is off
[ 41.340781] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 41.340790] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 41.340792] sdc: sdc1 sdc2
[ 41.357362] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 41.357383] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 41.376377] Attempting manual resume
[ 41.376379] swsusp: Resume From Partition 8:6
[ 41.376380] PM: Checking swsusp image.
[ 41.376484] PM: Resume from disk failed.
[ 41.380359] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[ 41.380362] ReiserFS: sda7: using ordered data mode
[ 41.393986] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 41.394176] ReiserFS: sda7: checking transaction log (sda7)
[ 41.418372] ReiserFS: sda7: Using r5 hash to sort names
[ 44.501489] usb-storage: device scan complete
[ 44.501990] scsi 3:0:0:0: Direct-Access Sony Eri Memory Stick 0000 PQ: 0 ANSI: 0
[ 44.502854] usb-storage: device scan complete
[ 44.504220] sd 3:0:0:0: [sdd] 1947648 512-byte hardware sectors (997 MB)
[ 44.505470] sd 3:0:0:0: [sdd] Write Protect is off
[ 44.505477] sd 3:0:0:0: [sdd] Mode Sense: 00 6a 00 00
[ 44.505479] sd 3:0:0:0: [sdd] Assuming drive cache: write through
[ 44.507466] sd 3:0:0:0: [sdd] 1947648 512-byte hardware sectors (997 MB)
[ 44.508591] sd 3:0:0:0: [sdd] Write Protect is off
[ 44.508594] sd 3:0:0:0: [sdd] Mode Sense: 00 6a 00 00
[ 44.508595] sd 3:0:0:0: [sdd] Assuming drive cache: write through
[ 44.508598] sdd: sdd1
[ 44.521229] sd 3:0:0:0: [sdd] Attached SCSI removable disk
[ 44.521257] sd 3:0:0:0: Attached scsi generic sg4 type 0
[ 44.717158] scsi 2:0:0:0: Direct-Access Motorola Motorola Phone 2.31 PQ: 0 ANSI: 2
[ 44.739742] sd 2:0:0:0: [sde] 990976 512-byte hardware sectors (507 MB)
[ 44.751106] sd 2:0:0:0: [sde] Write Protect is off
[ 44.751108] sd 2:0:0:0: [sde] Mode Sense: 0b 00 00 08
[ 44.751110] sd 2:0:0:0: [sde] Assuming drive cache: write through
[ 44.795687] sd 2:0:0:0: [sde] 990976 512-byte hardware sectors (507 MB)
[ 44.807051] sd 2:0:0:0: [sde] Write Protect is off
[ 44.807054] sd 2:0:0:0: [sde] Mode Sense: 0b 00 00 08
[ 44.807055] sd 2:0:0:0: [sde] Assuming drive cache: write through
[ 44.807058] sde: sde1
[ 44.839669] sd 2:0:0:0: [sde] Attached SCSI removable disk
[ 44.839695] sd 2:0:0:0: Attached scsi generic sg5 type 0
[ 48.296809] input: PC Speaker as /devices/platform/pcspkr/input/input3
Och, ja, EMU-kortet är default.
Så jä... frustrerande, jag hade det ju. Det lät bra. Allt var frid och fröjd, solen sken, fåglarna kvittrade, barnen var snälla (dream on....) Aaaaarrrrgh.
Vill få detta att funka, NU!
Tack för all input så här långt, uppskattas verkligen. Killen som hjälpte mig har ca 15 år unix/linux/terminalvana. Gjorde allt via remote desktop från Kalmar (jag bor i Göteborg). Kul att se menyerna samt terminal flasha förbi och sedan faktiskt få ljud. Men se'n känner ni ju storyn..
Anders.L
/FoX
Re: Ljud i 8.04 med E-mu0404
Hej igen..... Verkar få dela upp svaret, för många tecken....
ok, here goes...
dmesg ger (mycket):
[ 35.801891] EISA: Probing bus 0 at eisa.0
[ 35.801916] EISA: Detected 0 cards.
[ 35.801918] cpuidle: using governor ladder
[ 35.801920] cpuidle: using governor menu
[ 35.801980] NET: Registered protocol family 1
[ 35.802006] Using IPI No-Shortcut mode
[ 35.802022] registered taskstats version 1
[ 35.802089] Magic number: 4:168:683
[ 35.802115] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 35.802116] EDD information not available.
[ 35.802216] Freeing unused kernel memory: 368k freed
[ 35.820205] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 36.951180] fuse init (API version 7.9)
[ 36.976885] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 36.976957] ACPI: SSDT DFEE8300, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
[ 36.977040] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 36.977048] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 36.977054] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 37.105003] usbcore: registered new interface driver usbfs
[ 37.105015] usbcore: registered new interface driver hub
[ 37.124477] usbcore: registered new device driver usb
[ 37.149880] USB Universal Host Controller Interface driver v3.0
[ 37.149913] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 37.149920] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 37.149922] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 37.150057] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 37.150079] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 37.150153] usb usb1: configuration #1 chosen from 1 choice
[ 37.150165] hub 1-0:1.0: USB hub found
[ 37.150168] hub 1-0:1.0: 2 ports detected
[ 37.244407] SCSI subsystem initialized
[ 37.253347] ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 18
[ 37.253354] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 37.253357] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 37.253373] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 37.253393] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e100
[ 37.253455] usb usb2: configuration #1 chosen from 1 choice
[ 37.253468] hub 2-0:1.0: USB hub found
[ 37.253470] hub 2-0:1.0: 2 ports detected
[ 37.301315] libata version 3.00 loaded.
[ 37.357239] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 37.357247] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 37.357249] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 37.357262] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 37.357282] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e500
[ 37.357342] usb usb3: configuration #1 chosen from 1 choice
[ 37.357355] hub 3-0:1.0: USB hub found
[ 37.357357] hub 3-0:1.0: 2 ports detected
[ 37.461135] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 37.461142] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 37.461144] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 37.461157] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 37.461177] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e200
[ 37.461238] usb usb4: configuration #1 chosen from 1 choice
[ 37.461252] hub 4-0:1.0: USB hub found
[ 37.461254] hub 4-0:1.0: 2 ports detected
[ 37.493052] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 37.564057] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 21
[ 37.564064] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 37.564068] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 37.564084] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 37.564106] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000e300
[ 37.564191] usb usb5: configuration #1 chosen from 1 choice
[ 37.564210] hub 5-0:1.0: USB hub found
[ 37.564213] hub 5-0:1.0: 2 ports detected
[ 37.660663] usb 1-2: configuration #1 chosen from 1 choice
[ 37.668936] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 37.668942] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 37.668945] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 37.668963] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 37.668982] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000e400
[ 37.669065] usb usb6: configuration #1 chosen from 1 choice
[ 37.669083] hub 6-0:1.0: USB hub found
[ 37.669087] hub 6-0:1.0: 2 ports detected
[ 37.772930] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19
[ 37.772938] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 37.772941] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 37.772959] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 37.776857] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 37.776860] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfa201000
[ 37.792751] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 37.792814] usb usb7: configuration #1 chosen from 1 choice
[ 37.792829] hub 7-0:1.0: USB hub found
[ 37.792832] hub 7-0:1.0: 6 ports detected
[ 37.895721] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 37.895729] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 37.895732] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 37.895750] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 37.899633] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 37.899636] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfa200000
[ 37.911637] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 37.911710] usb usb8: configuration #1 chosen from 1 choice
[ 37.911729] hub 8-0:1.0: USB hub found
[ 37.911733] hub 8-0:1.0: 6 ports detected
[ 37.916692] usbcore: registered new interface driver hiddev
[ 37.916694] usb 1-2: USB disconnect, address 2
[ 38.016612] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 38.016629] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 38.016643] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 38.016862] eth0: RTL8168b/8111b at 0xf8864000, 00:1a:4d:53:40:59, XID 38000000 IRQ 219
[ 38.017937] ahci 0000:03:00.0: version 3.0
[ 38.017954] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 38.467082] usb 7-4: new high speed USB device using ehci_hcd and address 3
[ 38.600306] usb 7-4: configuration #1 chosen from 1 choice
[ 38.600500] hub 7-4:1.0: USB hub found
[ 38.600731] hub 7-4:1.0: 4 ports detected
[ 38.702930] usbcore: registered new interface driver usbhid
[ 38.702933] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 39.019556] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 39.019559] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 39.019565] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 39.019670] scsi0 : ahci
[ 39.019789] scsi1 : ahci
[ 39.019823] ata1: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000100 irq 16
[ 39.019826] ata2: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000180 irq 16
[ 39.087761] usb 7-4.2: new full speed USB device using ehci_hcd and address 4
[ 39.191722] usb 7-4.2: configuration #1 chosen from 1 choice
[ 39.338229] ata1: SATA link down (SStatus 0 SControl 300)
[ 39.398458] usb 7-4.4: new full speed USB device using ehci_hcd and address 5
[ 39.497923] usb 7-4.4: configuration #1 chosen from 1 choice
[ 39.504798] usbcore: registered new interface driver libusual
[ 39.509266] Initializing USB Mass Storage driver...
[ 39.509302] scsi2 : SCSI emulation for USB Mass Storage devices
[ 39.509345] usb-storage: device found at 4
[ 39.509346] usb-storage: waiting for device to settle before scanning
[ 39.509358] scsi3 : SCSI emulation for USB Mass Storage devices
[ 39.509386] usbcore: registered new interface driver usb-storage
[ 39.509388] USB Mass Storage support registered.
[ 39.509420] usb-storage: device found at 5
[ 39.509421] usb-storage: waiting for device to settle before scanning
[ 39.657909] ata2: SATA link down (SStatus 0 SControl 300)
[ 39.657965] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 21
[ 39.657989] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 39.657998] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 39.658014] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 19 (level, low) -> IRQ 21
[ 39.658029] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 39.658038] ACPI: PCI interrupt for device 0000:00:1f.5 disabled
[ 39.658059] PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
[ 39.658063] ACPI: PCI Interrupt 0000:03:00.1 -> GSI 17 (level, low) -> IRQ 17
[ 39.658083] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 39.658094] ACPI: PCI interrupt for device 0000:03:00.1 disabled
[ 39.658911] ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 39.708573] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fa104000-fa1047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 39.711407] ata_piix 0000:00:1f.2: version 2.12
[ 39.711410] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 39.711420] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 21
[ 39.711434] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 39.712215] scsi4 : ata_piix
[ 39.712574] scsi5 : ata_piix
[ 39.712905] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 39.712906] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 39.906818] ata3.00: HPA unlocked: 625140335 -> 625142448, native 625142448
[ 39.906823] ata3.00: ATA-7: Hitachi HDT725032VLA360, V54OA7EA, max UDMA/133
[ 39.906827] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 39.906953] ata3.01: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 39.906956] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 39.922994] ata3.00: configured for UDMA/133
[ 39.933911] ata3.01: configured for UDMA/133
[ 40.041523] usb 1-2: new low speed USB device using uhci_hcd and address 4
[ 40.210187] usb 1-2: configuration #1 chosen from 1 choice
[ 40.226193] input: USB Mouse STD. as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/input/input2
[ 40.250343] input,hidraw0: USB HID v1.00 Mouse [USB Mouse STD. ] on usb-0000:00:1a.0-2
[ 40.409317] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203N, SB01, max UDMA/100
[ 40.581165] ata4.00: configured for UDMA/100
[ 40.581252] scsi 4:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 40.581316] scsi 4:0:1:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 40.581957] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203N SB01 PQ: 0 ANSI: 5
[ 40.581995] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 40.582006] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 19 (level, low) -> IRQ 21
[ 40.582023] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 40.582042] scsi6 : ata_piix
[ 40.582064] scsi7 : ata_piix
[ 40.582311] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 21
[ 40.582312] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 21
[ 40.911298] ACPI: PCI Interrupt 0000:03:00.1 -> GSI 17 (level, low) -> IRQ 17
[ 40.911320] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 40.911431] scsi8 : pata_jmicron
[ 40.911876] scsi9 : pata_jmicron
[ 40.912159] ata7: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 17
[ 40.912161] ata8: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 17
[ 40.916885] Driver 'sd' needs updating - please use bus_type methods
[ 40.916924] sd 4:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 40.916931] sd 4:0:0:0: [sda] Write Protect is off
[ 40.916932] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 40.916941] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.916968] sd 4:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 40.916973] sd 4:0:0:0: [sda] Write Protect is off
[ 40.916975] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 40.916983] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.916985] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 40.932244] sda1 sda2 < sda5 sda6 sda7 >
[ 40.967457] sd 4:0:0:0: [sda] Attached SCSI disk
[ 40.967496] sd 4:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 40.967505] sd 4:0:1:0: [sdb] Write Protect is off
[ 40.967507] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.967520] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.967552] sd 4:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 40.967560] sd 4:0:1:0: [sdb] Write Protect is off
[ 40.967562] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.967574] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.967577] sdb:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c8661800001a4d]
[ 41.012899] sdb1 < sdb5 >
[ 41.022011] sd 4:0:1:0: [sdb] Attached SCSI disk
[ 41.025444] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 41.025455] sd 4:0:1:0: Attached scsi generic sg1 type 0
[ 41.025464] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 41.026091] sr0: scsi3-mmc drive: 40x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 41.026093] Uniform CD-ROM driver Revision: 3.20
[ 41.026116] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 41.110196] ata7.00: ATA-7: ST3250820A, 3.AAC, max UDMA/100
[ 41.110199] ata7.00: 488397168 sectors, multi 16: LBA48
[ 41.110209] ata7.00: limited to UDMA/33 due to 40-wire cable
[ 41.176626] ata7.00: configured for UDMA/33
[ 41.340687] scsi 8:0:0:0: Direct-Access ATA ST3250820A 3.AA PQ: 0 ANSI: 5
[ 41.340732] sd 8:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 41.340739] sd 8:0:0:0: [sdc] Write Protect is off
[ 41.340741] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 41.340750] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 41.340774] sd 8:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 41.340780] sd 8:0:0:0: [sdc] Write Protect is off
[ 41.340781] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 41.340790] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 41.340792] sdc: sdc1 sdc2
[ 41.357362] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 41.357383] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 41.376377] Attempting manual resume
[ 41.376379] swsusp: Resume From Partition 8:6
[ 41.376380] PM: Checking swsusp image.
[ 41.376484] PM: Resume from disk failed.
[ 41.380359] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[ 41.380362] ReiserFS: sda7: using ordered data mode
[ 41.393986] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 41.394176] ReiserFS: sda7: checking transaction log (sda7)
[ 41.418372] ReiserFS: sda7: Using r5 hash to sort names
[ 44.501489] usb-storage: device scan complete
[ 44.501990] scsi 3:0:0:0: Direct-Access Sony Eri Memory Stick 0000 PQ: 0 ANSI: 0
[ 44.502854] usb-storage: device scan complete
[ 44.504220] sd 3:0:0:0: [sdd] 1947648 512-byte hardware sectors (997 MB)
[ 44.505470] sd 3:0:0:0: [sdd] Write Protect is off
[ 44.505477] sd 3:0:0:0: [sdd] Mode Sense: 00 6a 00 00
[ 44.505479] sd 3:0:0:0: [sdd] Assuming drive cache: write through
[ 44.507466] sd 3:0:0:0: [sdd] 1947648 512-byte hardware sectors (997 MB)
[ 44.508591] sd 3:0:0:0: [sdd] Write Protect is off
[ 44.508594] sd 3:0:0:0: [sdd] Mode Sense: 00 6a 00 00
[ 44.508595] sd 3:0:0:0: [sdd] Assuming drive cache: write through
[ 44.508598] sdd: sdd1
[ 44.521229] sd 3:0:0:0: [sdd] Attached SCSI removable disk
[ 44.521257] sd 3:0:0:0: Attached scsi generic sg4 type 0
[ 44.717158] scsi 2:0:0:0: Direct-Access Motorola Motorola Phone 2.31 PQ: 0 ANSI: 2
[ 44.739742] sd 2:0:0:0: [sde] 990976 512-byte hardware sectors (507 MB)
[ 44.751106] sd 2:0:0:0: [sde] Write Protect is off
[ 44.751108] sd 2:0:0:0: [sde] Mode Sense: 0b 00 00 08
[ 44.751110] sd 2:0:0:0: [sde] Assuming drive cache: write through
[ 44.795687] sd 2:0:0:0: [sde] 990976 512-byte hardware sectors (507 MB)
[ 44.807051] sd 2:0:0:0: [sde] Write Protect is off
[ 44.807054] sd 2:0:0:0: [sde] Mode Sense: 0b 00 00 08
[ 44.807055] sd 2:0:0:0: [sde] Assuming drive cache: write through
[ 44.807058] sde: sde1
[ 44.839669] sd 2:0:0:0: [sde] Attached SCSI removable disk
[ 44.839695] sd 2:0:0:0: Attached scsi generic sg5 type 0
[ 48.296809] input: PC Speaker as /devices/platform/pcspkr/input/input3
Och, ja, EMU-kortet är default.
Så jä... frustrerande, jag hade det ju. Det lät bra. Allt var frid och fröjd, solen sken, fåglarna kvittrade, barnen var snälla (dream on....) Aaaaarrrrgh.
Vill få detta att funka, NU!
Tack för all input så här långt, uppskattas verkligen. Killen som hjälpte mig har ca 15 år unix/linux/terminalvana. Gjorde allt via remote desktop från Kalmar (jag bor i Göteborg). Kul att se menyerna samt terminal flasha förbi och sedan faktiskt få ljud. Men se'n känner ni ju storyn..
Anders.L
/FoX
ok, here goes...
dmesg ger (mycket):
[ 35.801891] EISA: Probing bus 0 at eisa.0
[ 35.801916] EISA: Detected 0 cards.
[ 35.801918] cpuidle: using governor ladder
[ 35.801920] cpuidle: using governor menu
[ 35.801980] NET: Registered protocol family 1
[ 35.802006] Using IPI No-Shortcut mode
[ 35.802022] registered taskstats version 1
[ 35.802089] Magic number: 4:168:683
[ 35.802115] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 35.802116] EDD information not available.
[ 35.802216] Freeing unused kernel memory: 368k freed
[ 35.820205] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 36.951180] fuse init (API version 7.9)
[ 36.976885] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 36.976957] ACPI: SSDT DFEE8300, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
[ 36.977040] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 36.977048] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 36.977054] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 37.105003] usbcore: registered new interface driver usbfs
[ 37.105015] usbcore: registered new interface driver hub
[ 37.124477] usbcore: registered new device driver usb
[ 37.149880] USB Universal Host Controller Interface driver v3.0
[ 37.149913] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 37.149920] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 37.149922] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 37.150057] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 37.150079] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 37.150153] usb usb1: configuration #1 chosen from 1 choice
[ 37.150165] hub 1-0:1.0: USB hub found
[ 37.150168] hub 1-0:1.0: 2 ports detected
[ 37.244407] SCSI subsystem initialized
[ 37.253347] ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 18
[ 37.253354] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 37.253357] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 37.253373] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 37.253393] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e100
[ 37.253455] usb usb2: configuration #1 chosen from 1 choice
[ 37.253468] hub 2-0:1.0: USB hub found
[ 37.253470] hub 2-0:1.0: 2 ports detected
[ 37.301315] libata version 3.00 loaded.
[ 37.357239] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 37.357247] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 37.357249] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 37.357262] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 37.357282] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e500
[ 37.357342] usb usb3: configuration #1 chosen from 1 choice
[ 37.357355] hub 3-0:1.0: USB hub found
[ 37.357357] hub 3-0:1.0: 2 ports detected
[ 37.461135] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 37.461142] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 37.461144] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 37.461157] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 37.461177] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e200
[ 37.461238] usb usb4: configuration #1 chosen from 1 choice
[ 37.461252] hub 4-0:1.0: USB hub found
[ 37.461254] hub 4-0:1.0: 2 ports detected
[ 37.493052] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 37.564057] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 21
[ 37.564064] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 37.564068] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 37.564084] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 37.564106] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000e300
[ 37.564191] usb usb5: configuration #1 chosen from 1 choice
[ 37.564210] hub 5-0:1.0: USB hub found
[ 37.564213] hub 5-0:1.0: 2 ports detected
[ 37.660663] usb 1-2: configuration #1 chosen from 1 choice
[ 37.668936] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 37.668942] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 37.668945] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 37.668963] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 37.668982] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000e400
[ 37.669065] usb usb6: configuration #1 chosen from 1 choice
[ 37.669083] hub 6-0:1.0: USB hub found
[ 37.669087] hub 6-0:1.0: 2 ports detected
[ 37.772930] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19
[ 37.772938] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 37.772941] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 37.772959] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 37.776857] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 37.776860] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfa201000
[ 37.792751] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 37.792814] usb usb7: configuration #1 chosen from 1 choice
[ 37.792829] hub 7-0:1.0: USB hub found
[ 37.792832] hub 7-0:1.0: 6 ports detected
[ 37.895721] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 37.895729] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 37.895732] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 37.895750] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 37.899633] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 37.899636] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfa200000
[ 37.911637] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 37.911710] usb usb8: configuration #1 chosen from 1 choice
[ 37.911729] hub 8-0:1.0: USB hub found
[ 37.911733] hub 8-0:1.0: 6 ports detected
[ 37.916692] usbcore: registered new interface driver hiddev
[ 37.916694] usb 1-2: USB disconnect, address 2
[ 38.016612] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 38.016629] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 38.016643] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 38.016862] eth0: RTL8168b/8111b at 0xf8864000, 00:1a:4d:53:40:59, XID 38000000 IRQ 219
[ 38.017937] ahci 0000:03:00.0: version 3.0
[ 38.017954] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 38.467082] usb 7-4: new high speed USB device using ehci_hcd and address 3
[ 38.600306] usb 7-4: configuration #1 chosen from 1 choice
[ 38.600500] hub 7-4:1.0: USB hub found
[ 38.600731] hub 7-4:1.0: 4 ports detected
[ 38.702930] usbcore: registered new interface driver usbhid
[ 38.702933] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 39.019556] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 39.019559] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 39.019565] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 39.019670] scsi0 : ahci
[ 39.019789] scsi1 : ahci
[ 39.019823] ata1: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000100 irq 16
[ 39.019826] ata2: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000180 irq 16
[ 39.087761] usb 7-4.2: new full speed USB device using ehci_hcd and address 4
[ 39.191722] usb 7-4.2: configuration #1 chosen from 1 choice
[ 39.338229] ata1: SATA link down (SStatus 0 SControl 300)
[ 39.398458] usb 7-4.4: new full speed USB device using ehci_hcd and address 5
[ 39.497923] usb 7-4.4: configuration #1 chosen from 1 choice
[ 39.504798] usbcore: registered new interface driver libusual
[ 39.509266] Initializing USB Mass Storage driver...
[ 39.509302] scsi2 : SCSI emulation for USB Mass Storage devices
[ 39.509345] usb-storage: device found at 4
[ 39.509346] usb-storage: waiting for device to settle before scanning
[ 39.509358] scsi3 : SCSI emulation for USB Mass Storage devices
[ 39.509386] usbcore: registered new interface driver usb-storage
[ 39.509388] USB Mass Storage support registered.
[ 39.509420] usb-storage: device found at 5
[ 39.509421] usb-storage: waiting for device to settle before scanning
[ 39.657909] ata2: SATA link down (SStatus 0 SControl 300)
[ 39.657965] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 21
[ 39.657989] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 39.657998] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 39.658014] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 19 (level, low) -> IRQ 21
[ 39.658029] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 39.658038] ACPI: PCI interrupt for device 0000:00:1f.5 disabled
[ 39.658059] PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
[ 39.658063] ACPI: PCI Interrupt 0000:03:00.1 -> GSI 17 (level, low) -> IRQ 17
[ 39.658083] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 39.658094] ACPI: PCI interrupt for device 0000:03:00.1 disabled
[ 39.658911] ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 39.708573] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fa104000-fa1047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 39.711407] ata_piix 0000:00:1f.2: version 2.12
[ 39.711410] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 39.711420] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 21
[ 39.711434] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 39.712215] scsi4 : ata_piix
[ 39.712574] scsi5 : ata_piix
[ 39.712905] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 39.712906] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 39.906818] ata3.00: HPA unlocked: 625140335 -> 625142448, native 625142448
[ 39.906823] ata3.00: ATA-7: Hitachi HDT725032VLA360, V54OA7EA, max UDMA/133
[ 39.906827] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 39.906953] ata3.01: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 39.906956] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 39.922994] ata3.00: configured for UDMA/133
[ 39.933911] ata3.01: configured for UDMA/133
[ 40.041523] usb 1-2: new low speed USB device using uhci_hcd and address 4
[ 40.210187] usb 1-2: configuration #1 chosen from 1 choice
[ 40.226193] input: USB Mouse STD. as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/input/input2
[ 40.250343] input,hidraw0: USB HID v1.00 Mouse [USB Mouse STD. ] on usb-0000:00:1a.0-2
[ 40.409317] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203N, SB01, max UDMA/100
[ 40.581165] ata4.00: configured for UDMA/100
[ 40.581252] scsi 4:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 40.581316] scsi 4:0:1:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 40.581957] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203N SB01 PQ: 0 ANSI: 5
[ 40.581995] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 40.582006] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 19 (level, low) -> IRQ 21
[ 40.582023] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 40.582042] scsi6 : ata_piix
[ 40.582064] scsi7 : ata_piix
[ 40.582311] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 21
[ 40.582312] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 21
[ 40.911298] ACPI: PCI Interrupt 0000:03:00.1 -> GSI 17 (level, low) -> IRQ 17
[ 40.911320] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 40.911431] scsi8 : pata_jmicron
[ 40.911876] scsi9 : pata_jmicron
[ 40.912159] ata7: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 17
[ 40.912161] ata8: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 17
[ 40.916885] Driver 'sd' needs updating - please use bus_type methods
[ 40.916924] sd 4:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 40.916931] sd 4:0:0:0: [sda] Write Protect is off
[ 40.916932] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 40.916941] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.916968] sd 4:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 40.916973] sd 4:0:0:0: [sda] Write Protect is off
[ 40.916975] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 40.916983] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.916985] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 40.932244] sda1 sda2 < sda5 sda6 sda7 >
[ 40.967457] sd 4:0:0:0: [sda] Attached SCSI disk
[ 40.967496] sd 4:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 40.967505] sd 4:0:1:0: [sdb] Write Protect is off
[ 40.967507] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.967520] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.967552] sd 4:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 40.967560] sd 4:0:1:0: [sdb] Write Protect is off
[ 40.967562] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.967574] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.967577] sdb:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c8661800001a4d]
[ 41.012899] sdb1 < sdb5 >
[ 41.022011] sd 4:0:1:0: [sdb] Attached SCSI disk
[ 41.025444] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 41.025455] sd 4:0:1:0: Attached scsi generic sg1 type 0
[ 41.025464] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 41.026091] sr0: scsi3-mmc drive: 40x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 41.026093] Uniform CD-ROM driver Revision: 3.20
[ 41.026116] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 41.110196] ata7.00: ATA-7: ST3250820A, 3.AAC, max UDMA/100
[ 41.110199] ata7.00: 488397168 sectors, multi 16: LBA48
[ 41.110209] ata7.00: limited to UDMA/33 due to 40-wire cable
[ 41.176626] ata7.00: configured for UDMA/33
[ 41.340687] scsi 8:0:0:0: Direct-Access ATA ST3250820A 3.AA PQ: 0 ANSI: 5
[ 41.340732] sd 8:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 41.340739] sd 8:0:0:0: [sdc] Write Protect is off
[ 41.340741] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 41.340750] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 41.340774] sd 8:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 41.340780] sd 8:0:0:0: [sdc] Write Protect is off
[ 41.340781] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 41.340790] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 41.340792] sdc: sdc1 sdc2
[ 41.357362] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 41.357383] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 41.376377] Attempting manual resume
[ 41.376379] swsusp: Resume From Partition 8:6
[ 41.376380] PM: Checking swsusp image.
[ 41.376484] PM: Resume from disk failed.
[ 41.380359] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[ 41.380362] ReiserFS: sda7: using ordered data mode
[ 41.393986] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 41.394176] ReiserFS: sda7: checking transaction log (sda7)
[ 41.418372] ReiserFS: sda7: Using r5 hash to sort names
[ 44.501489] usb-storage: device scan complete
[ 44.501990] scsi 3:0:0:0: Direct-Access Sony Eri Memory Stick 0000 PQ: 0 ANSI: 0
[ 44.502854] usb-storage: device scan complete
[ 44.504220] sd 3:0:0:0: [sdd] 1947648 512-byte hardware sectors (997 MB)
[ 44.505470] sd 3:0:0:0: [sdd] Write Protect is off
[ 44.505477] sd 3:0:0:0: [sdd] Mode Sense: 00 6a 00 00
[ 44.505479] sd 3:0:0:0: [sdd] Assuming drive cache: write through
[ 44.507466] sd 3:0:0:0: [sdd] 1947648 512-byte hardware sectors (997 MB)
[ 44.508591] sd 3:0:0:0: [sdd] Write Protect is off
[ 44.508594] sd 3:0:0:0: [sdd] Mode Sense: 00 6a 00 00
[ 44.508595] sd 3:0:0:0: [sdd] Assuming drive cache: write through
[ 44.508598] sdd: sdd1
[ 44.521229] sd 3:0:0:0: [sdd] Attached SCSI removable disk
[ 44.521257] sd 3:0:0:0: Attached scsi generic sg4 type 0
[ 44.717158] scsi 2:0:0:0: Direct-Access Motorola Motorola Phone 2.31 PQ: 0 ANSI: 2
[ 44.739742] sd 2:0:0:0: [sde] 990976 512-byte hardware sectors (507 MB)
[ 44.751106] sd 2:0:0:0: [sde] Write Protect is off
[ 44.751108] sd 2:0:0:0: [sde] Mode Sense: 0b 00 00 08
[ 44.751110] sd 2:0:0:0: [sde] Assuming drive cache: write through
[ 44.795687] sd 2:0:0:0: [sde] 990976 512-byte hardware sectors (507 MB)
[ 44.807051] sd 2:0:0:0: [sde] Write Protect is off
[ 44.807054] sd 2:0:0:0: [sde] Mode Sense: 0b 00 00 08
[ 44.807055] sd 2:0:0:0: [sde] Assuming drive cache: write through
[ 44.807058] sde: sde1
[ 44.839669] sd 2:0:0:0: [sde] Attached SCSI removable disk
[ 44.839695] sd 2:0:0:0: Attached scsi generic sg5 type 0
[ 48.296809] input: PC Speaker as /devices/platform/pcspkr/input/input3
Och, ja, EMU-kortet är default.
Så jä... frustrerande, jag hade det ju. Det lät bra. Allt var frid och fröjd, solen sken, fåglarna kvittrade, barnen var snälla (dream on....) Aaaaarrrrgh.
Vill få detta att funka, NU!
Tack för all input så här långt, uppskattas verkligen. Killen som hjälpte mig har ca 15 år unix/linux/terminalvana. Gjorde allt via remote desktop från Kalmar (jag bor i Göteborg). Kul att se menyerna samt terminal flasha förbi och sedan faktiskt få ljud. Men se'n känner ni ju storyn..
Anders.L
/FoX
Re: Ljud i 8.04 med E-mu0404_svar_del 2
Ok del två då.
dmesg forts
[ 48.387295] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 48.387298] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 48.387300] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 48.387303] end_request: I/O error, dev sde, sector 990912
[ 48.387305] Buffer I/O error on device sde, logical block 123864
[ 48.450133] iTCO_vendor_support: vendor-support=0
[ 48.462351] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 48.462393] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 48.462399] iTCO_wdt: No card detected
[ 48.481476] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 48.490120] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 48.516823] parport_pc 00:07: reported by Plug and Play ACPI
[ 48.516863] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 48.537401] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 48.537404] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 48.537406] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 48.537409] end_request: I/O error, dev sde, sector 990912
[ 48.537411] Buffer I/O error on device sde, logical block 123864
[ 48.559905] Linux agpgart interface v0.102
[ 48.607320] input: Power Button (FF) as /devices/virtual/input/input4
[ 48.652919] ACPI: Power Button (FF) [PWRF]
[ 48.652954] input: Power Button (CM) as /devices/virtual/input/input5
[ 48.674647] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 48.674651] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 48.674653] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 48.674656] end_request: I/O error, dev sde, sector 96
[ 48.674658] Buffer I/O error on device sde, logical block 12
[ 48.674661] Buffer I/O error on device sde, logical block 13
[ 48.674662] Buffer I/O error on device sde, logical block 14
[ 48.674664] Buffer I/O error on device sde, logical block 15
[ 48.674665] Buffer I/O error on device sde, logical block 16
[ 48.674667] Buffer I/O error on device sde, logical block 17
[ 48.674668] Buffer I/O error on device sde, logical block 18
[ 48.674669] Buffer I/O error on device sde, logical block 19
[ 48.716851] ACPI: Power Button (CM) [PWRB]
[ 48.815754] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 48.815757] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 48.815759] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 48.815762] end_request: I/O error, dev sde, sector 96
[ 48.952370] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 48.952374] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 48.952376] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 48.952379] end_request: I/O error, dev sde, sector 96
[ 49.021855] nvidia: module license 'NVIDIA' taints kernel.
[ 49.303641] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 49.303646] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 49.303699] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 49.499085] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 49.499089] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 49.499092] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 49.499094] end_request: I/O error, dev sde, sector 32
[ 49.646568] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 49.646572] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 49.646574] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 49.646577] end_request: I/O error, dev sde, sector 32
[ 49.655979] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 22
[ 49.656012] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:822: emu1010: Special config.
[ 49.656129] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:861: emu1010: EMU_HANA_ID=0x3f
[ 49.656131] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:880: emu1010: filename emu/emu0404.fw testing
[ 49.679798] cdc_acm 7-4.4:1.1: ttyACM0: USB ACM device
[ 49.686505] cdc_acm 7-4.4:1.3: ttyACM1: USB ACM device
[ 49.687243] usbcore: registered new interface driver cdc_acm
[ 49.687247] /build/buildd/linux-2.6.24/drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 50.133242] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:684: firmware size=0xd67c
[ 51.511277] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:897: emu1010: Hana Firmware loaded
[ 51.511324] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:900: Hana ver:1.1
[ 51.511381] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:905: emu1010: Card options=0x1
[ 51.511406] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:907: emu1010: Card options=0x1
[ 51.511892] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:945: emu1010: Card options3=0x1
[ 51.528167] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:226: Audigy2 value: Special config.
[ 51.528394] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/../../alsa-kernel/pci/emu10k1/emufx.c
EMU outputs on
[ 51.528397] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/../../alsa-kernel/pci/emu10k1/emufx.c
EMU2 inputs on
[ 51.664485] lp0: using parport0 (interrupt-driven).
[ 52.010667] Adding 289128k swap on /dev/sda6. Priority:-1 extents:1 across:289128k
[ 53.762793] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 53.762798] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 53.762801] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 53.762805] end_request: I/O error, dev sde, sector 32
[ 53.762807] printk: 15 messages suppressed.
[ 53.762809] Buffer I/O error on device sde1, logical block 0
[ 53.903030] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 53.903033] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 53.903035] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 53.903039] end_request: I/O error, dev sde, sector 272
[ 54.039646] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 54.039649] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 54.039651] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 54.039655] end_request: I/O error, dev sde, sector 32
[ 54.176013] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 54.176015] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 54.176018] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 54.176021] end_request: I/O error, dev sde, sector 990496
[ 54.314502] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 54.314505] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 54.314508] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 54.314511] end_request: I/O error, dev sde, sector 990496
[ 54.484086] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 54.484089] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 54.484092] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 54.484096] end_request: I/O error, dev sde, sector 990496
[ 54.642557] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 54.642559] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 54.642562] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 54.642565] end_request: I/O error, dev sde, sector 990496
[ 54.784168] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 54.784171] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 54.784174] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 54.784177] end_request: I/O error, dev sde, sector 32
[ 54.921035] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 54.921038] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 54.921040] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 54.921044] end_request: I/O error, dev sde, sector 40
[ 55.057027] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 55.057030] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 55.057032] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 55.057036] end_request: I/O error, dev sde, sector 32
[ 66.784814] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 66.784819] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 66.784822] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 66.784826] end_request: I/O error, dev sde, sector 32
[ 66.784828] printk: 53 messages suppressed.
[ 66.784830] Buffer I/O error on device sde1, logical block 0
[ 66.784834] Buffer I/O error on device sde1, logical block 1
[ 66.920930] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 66.920933] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 66.920936] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 66.920940] end_request: I/O error, dev sde, sector 272
[ 67.057296] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 67.057300] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 67.057302] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 67.057306] end_request: I/O error, dev sde, sector 32
[ 67.193539] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 67.193542] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 67.193545] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 67.193548] end_request: I/O error, dev sde, sector 990496
[ 67.329656] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 67.329660] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 67.329663] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 67.329666] end_request: I/O error, dev sde, sector 990496
[ 67.500488] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 67.500492] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 67.500495] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 67.500498] end_request: I/O error, dev sde, sector 990496
[ 67.636730] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 67.636733] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 67.636736] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 67.636740] end_request: I/O error, dev sde, sector 990496
[ 67.773347] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 67.773350] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 67.773353] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 67.773357] end_request: I/O error, dev sde, sector 32
[ 67.912212] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 67.912215] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 67.912218] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 67.912221] end_request: I/O error, dev sde, sector 40
[ 68.048578] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 68.048581] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 68.048584] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 68.048588] end_request: I/O error, dev sde, sector 32
[ 69.734952] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 69.990568] No dock devices found.
[ 70.845262] ppdev: user-space parallel port driver
[ 70.973408] audit(1218364868.393:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5438 profile="/usr/sbin/cupsd" namespace="default"
[ 71.024925] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 71.024927] apm: disabled - APM is not SMP safe.
[ 72.805928] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 72.805934] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 72.805938] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 72.805941] end_request: I/O error, dev sde, sector 0
[ 72.805944] printk: 52 messages suppressed.
[ 72.805946] Buffer I/O error on device sde, logical block 0
[ 72.946040] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 72.946044] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 72.946047] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 72.946051] end_request: I/O error, dev sde, sector 0
[ 73.082408] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 73.082412] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 73.082415] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 73.082419] end_request: I/O error, dev sde, sector 0
[ 73.263481] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 73.263485] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 73.263489] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 73.263492] end_request: I/O error, dev sde, sector 32
[ 73.403593] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 73.403597] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 73.403600] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 73.403603] end_request: I/O error, dev sde, sector 32
[ 73.403606] printk: 9 messages suppressed.
[ 73.403608] Buffer I/O error on device sde1, logical block 0
[ 73.550449] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 73.550453] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 73.550456] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 73.550460] end_request: I/O error, dev sde, sector 0
[ 73.687565] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 73.687569] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 73.687572] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 73.687576] end_request: I/O error, dev sde, sector 0
[ 73.824057] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 73.824060] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 73.824063] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 73.824067] end_request: I/O error, dev sde, sector 0
[ 74.094041] r8169: eth0: link up
[ 74.094046] r8169: eth0: link up
[ 74.211472] Bluetooth: Core ver 2.11
[ 74.211533] NET: Registered protocol family 31
[ 74.211534] Bluetooth: HCI device and connection manager initialized
[ 74.211537] Bluetooth: HCI socket layer initialized
[ 74.229043] Bluetooth: L2CAP ver 2.9
[ 74.229047] Bluetooth: L2CAP socket layer initialized
[ 74.275301] Bluetooth: RFCOMM socket layer initialized
[ 74.275310] Bluetooth: RFCOMM TTY layer initialized
[ 74.275311] Bluetooth: RFCOMM ver 1.8
[ 76.572845] NET: Registered protocol family 17
[ 80.442292] NET: Registered protocol family 10
[ 80.442471] lo: Disabled Privacy Extensions
[ 89.764349] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 89.764356] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 89.764359] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 89.764363] end_request: I/O error, dev sde, sector 0
[ 89.764365] printk: 6 messages suppressed.
[ 89.764367] Buffer I/O error on device sde, logical block 0
[ 89.764371] Buffer I/O error on device sde, logical block 1
[ 89.764373] Buffer I/O error on device sde, logical block 2
[ 89.900593] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 89.900597] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 89.900600] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 89.900603] end_request: I/O error, dev sde, sector 0
[ 90.038582] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 90.038587] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 90.038590] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 90.038593] end_request: I/O error, dev sde, sector 0
[ 91.198347] eth0: no IPv6 routers present
[ 103.757920] cdrom: sr0: mrw address space DMA selected
[ 104.118757] cdrom: sr0: mrw address space DMA selected
[ 104.240046] UDF-fs: No VRS found
[ 104.281005] ISO 9660 Extensions: Microsoft Joliet Level 1
dmesg forts
[ 48.387295] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 48.387298] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 48.387300] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 48.387303] end_request: I/O error, dev sde, sector 990912
[ 48.387305] Buffer I/O error on device sde, logical block 123864
[ 48.450133] iTCO_vendor_support: vendor-support=0
[ 48.462351] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 48.462393] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 48.462399] iTCO_wdt: No card detected
[ 48.481476] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 48.490120] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 48.516823] parport_pc 00:07: reported by Plug and Play ACPI
[ 48.516863] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 48.537401] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 48.537404] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 48.537406] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 48.537409] end_request: I/O error, dev sde, sector 990912
[ 48.537411] Buffer I/O error on device sde, logical block 123864
[ 48.559905] Linux agpgart interface v0.102
[ 48.607320] input: Power Button (FF) as /devices/virtual/input/input4
[ 48.652919] ACPI: Power Button (FF) [PWRF]
[ 48.652954] input: Power Button (CM) as /devices/virtual/input/input5
[ 48.674647] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 48.674651] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 48.674653] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 48.674656] end_request: I/O error, dev sde, sector 96
[ 48.674658] Buffer I/O error on device sde, logical block 12
[ 48.674661] Buffer I/O error on device sde, logical block 13
[ 48.674662] Buffer I/O error on device sde, logical block 14
[ 48.674664] Buffer I/O error on device sde, logical block 15
[ 48.674665] Buffer I/O error on device sde, logical block 16
[ 48.674667] Buffer I/O error on device sde, logical block 17
[ 48.674668] Buffer I/O error on device sde, logical block 18
[ 48.674669] Buffer I/O error on device sde, logical block 19
[ 48.716851] ACPI: Power Button (CM) [PWRB]
[ 48.815754] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 48.815757] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 48.815759] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 48.815762] end_request: I/O error, dev sde, sector 96
[ 48.952370] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 48.952374] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 48.952376] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 48.952379] end_request: I/O error, dev sde, sector 96
[ 49.021855] nvidia: module license 'NVIDIA' taints kernel.
[ 49.303641] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 49.303646] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 49.303699] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 49.499085] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 49.499089] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 49.499092] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 49.499094] end_request: I/O error, dev sde, sector 32
[ 49.646568] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 49.646572] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 49.646574] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 49.646577] end_request: I/O error, dev sde, sector 32
[ 49.655979] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 22
[ 49.656012] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:822: emu1010: Special config.
[ 49.656129] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:861: emu1010: EMU_HANA_ID=0x3f
[ 49.656131] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:880: emu1010: filename emu/emu0404.fw testing
[ 49.679798] cdc_acm 7-4.4:1.1: ttyACM0: USB ACM device
[ 49.686505] cdc_acm 7-4.4:1.3: ttyACM1: USB ACM device
[ 49.687243] usbcore: registered new interface driver cdc_acm
[ 49.687247] /build/buildd/linux-2.6.24/drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 50.133242] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:684: firmware size=0xd67c
[ 51.511277] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:897: emu1010: Hana Firmware loaded
[ 51.511324] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:900: Hana ver:1.1
[ 51.511381] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:905: emu1010: Card options=0x1
[ 51.511406] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:907: emu1010: Card options=0x1
[ 51.511892] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:945: emu1010: Card options3=0x1
[ 51.528167] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:226: Audigy2 value: Special config.
[ 51.528394] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/../../alsa-kernel/pci/emu10k1/emufx.c
EMU outputs on[ 51.528397] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/../../alsa-kernel/pci/emu10k1/emufx.c
EMU2 inputs on[ 51.664485] lp0: using parport0 (interrupt-driven).
[ 52.010667] Adding 289128k swap on /dev/sda6. Priority:-1 extents:1 across:289128k
[ 53.762793] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 53.762798] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 53.762801] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 53.762805] end_request: I/O error, dev sde, sector 32
[ 53.762807] printk: 15 messages suppressed.
[ 53.762809] Buffer I/O error on device sde1, logical block 0
[ 53.903030] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 53.903033] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 53.903035] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 53.903039] end_request: I/O error, dev sde, sector 272
[ 54.039646] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 54.039649] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 54.039651] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 54.039655] end_request: I/O error, dev sde, sector 32
[ 54.176013] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 54.176015] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 54.176018] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 54.176021] end_request: I/O error, dev sde, sector 990496
[ 54.314502] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 54.314505] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 54.314508] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 54.314511] end_request: I/O error, dev sde, sector 990496
[ 54.484086] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 54.484089] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 54.484092] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 54.484096] end_request: I/O error, dev sde, sector 990496
[ 54.642557] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 54.642559] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 54.642562] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 54.642565] end_request: I/O error, dev sde, sector 990496
[ 54.784168] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 54.784171] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 54.784174] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 54.784177] end_request: I/O error, dev sde, sector 32
[ 54.921035] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 54.921038] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 54.921040] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 54.921044] end_request: I/O error, dev sde, sector 40
[ 55.057027] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 55.057030] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 55.057032] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 55.057036] end_request: I/O error, dev sde, sector 32
[ 66.784814] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 66.784819] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 66.784822] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 66.784826] end_request: I/O error, dev sde, sector 32
[ 66.784828] printk: 53 messages suppressed.
[ 66.784830] Buffer I/O error on device sde1, logical block 0
[ 66.784834] Buffer I/O error on device sde1, logical block 1
[ 66.920930] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 66.920933] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 66.920936] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 66.920940] end_request: I/O error, dev sde, sector 272
[ 67.057296] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 67.057300] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 67.057302] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 67.057306] end_request: I/O error, dev sde, sector 32
[ 67.193539] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 67.193542] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 67.193545] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 67.193548] end_request: I/O error, dev sde, sector 990496
[ 67.329656] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 67.329660] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 67.329663] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 67.329666] end_request: I/O error, dev sde, sector 990496
[ 67.500488] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 67.500492] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 67.500495] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 67.500498] end_request: I/O error, dev sde, sector 990496
[ 67.636730] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 67.636733] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 67.636736] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 67.636740] end_request: I/O error, dev sde, sector 990496
[ 67.773347] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 67.773350] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 67.773353] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 67.773357] end_request: I/O error, dev sde, sector 32
[ 67.912212] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 67.912215] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 67.912218] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 67.912221] end_request: I/O error, dev sde, sector 40
[ 68.048578] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 68.048581] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 68.048584] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 68.048588] end_request: I/O error, dev sde, sector 32
[ 69.734952] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 69.990568] No dock devices found.
[ 70.845262] ppdev: user-space parallel port driver
[ 70.973408] audit(1218364868.393:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5438 profile="/usr/sbin/cupsd" namespace="default"
[ 71.024925] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 71.024927] apm: disabled - APM is not SMP safe.
[ 72.805928] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 72.805934] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 72.805938] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 72.805941] end_request: I/O error, dev sde, sector 0
[ 72.805944] printk: 52 messages suppressed.
[ 72.805946] Buffer I/O error on device sde, logical block 0
[ 72.946040] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 72.946044] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 72.946047] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 72.946051] end_request: I/O error, dev sde, sector 0
[ 73.082408] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 73.082412] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 73.082415] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 73.082419] end_request: I/O error, dev sde, sector 0
[ 73.263481] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 73.263485] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 73.263489] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 73.263492] end_request: I/O error, dev sde, sector 32
[ 73.403593] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 73.403597] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 73.403600] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 73.403603] end_request: I/O error, dev sde, sector 32
[ 73.403606] printk: 9 messages suppressed.
[ 73.403608] Buffer I/O error on device sde1, logical block 0
[ 73.550449] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 73.550453] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 73.550456] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 73.550460] end_request: I/O error, dev sde, sector 0
[ 73.687565] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 73.687569] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 73.687572] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 73.687576] end_request: I/O error, dev sde, sector 0
[ 73.824057] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 73.824060] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 73.824063] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 73.824067] end_request: I/O error, dev sde, sector 0
[ 74.094041] r8169: eth0: link up
[ 74.094046] r8169: eth0: link up
[ 74.211472] Bluetooth: Core ver 2.11
[ 74.211533] NET: Registered protocol family 31
[ 74.211534] Bluetooth: HCI device and connection manager initialized
[ 74.211537] Bluetooth: HCI socket layer initialized
[ 74.229043] Bluetooth: L2CAP ver 2.9
[ 74.229047] Bluetooth: L2CAP socket layer initialized
[ 74.275301] Bluetooth: RFCOMM socket layer initialized
[ 74.275310] Bluetooth: RFCOMM TTY layer initialized
[ 74.275311] Bluetooth: RFCOMM ver 1.8
[ 76.572845] NET: Registered protocol family 17
[ 80.442292] NET: Registered protocol family 10
[ 80.442471] lo: Disabled Privacy Extensions
[ 89.764349] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 89.764356] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 89.764359] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 89.764363] end_request: I/O error, dev sde, sector 0
[ 89.764365] printk: 6 messages suppressed.
[ 89.764367] Buffer I/O error on device sde, logical block 0
[ 89.764371] Buffer I/O error on device sde, logical block 1
[ 89.764373] Buffer I/O error on device sde, logical block 2
[ 89.900593] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 89.900597] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 89.900600] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 89.900603] end_request: I/O error, dev sde, sector 0
[ 90.038582] sd 2:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 90.038587] sd 2:0:0:0: [sde] Sense Key : Medium Error [current]
[ 90.038590] sd 2:0:0:0: [sde] Add. Sense: No additional sense information
[ 90.038593] end_request: I/O error, dev sde, sector 0
[ 91.198347] eth0: no IPv6 routers present
[ 103.757920] cdrom: sr0: mrw address space DMA selected
[ 104.118757] cdrom: sr0: mrw address space DMA selected
[ 104.240046] UDF-fs: No VRS found
[ 104.281005] ISO 9660 Extensions: Microsoft Joliet Level 1
Re: Ljud i 8.04 med E-mu0404_del 3
Och
anders@anders-desktop:~$ dmesg | grep emu
[ 35.788850] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 39.509302] scsi2 : SCSI emulation for USB Mass Storage devices
[ 39.509358] scsi3 : SCSI emulation for USB Mass Storage devices
[ 49.656012] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:822: emu1010: Special config.
[ 49.656129] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:861: emu1010: EMU_HANA_ID=0x3f
[ 49.656131] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:880: emu1010: filename emu/emu0404.fw testing
[ 50.133242] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:684: firmware size=0xd67c
[ 51.511277] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:897: emu1010: Hana Firmware loaded
[ 51.511324] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:900: Hana ver:1.1
[ 51.511381] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:905: emu1010: Card options=0x1
[ 51.511406] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:907: emu1010: Card options=0x1
[ 51.511892] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:945: emu1010: Card options3=0x1
[ 51.528167] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:226: Audigy2 value: Special config.
[ 51.528394] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/../../alsa-kernel/pci/emu10k1/emufx.c EMU outputs on
[ 51.528397] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/../../alsa-kernel/pci/emu10k1/emufx.c EMU2 inputs on
anders@anders-desktop:~$
Sorry för det jobbiga messandet, finns det nå't bra sät att lägga in svar från tex dmesg , där jag får väldigt mycket, utan att behöva dela upp detså här??
Anders.L
anders@anders-desktop:~$ dmesg | grep emu
[ 35.788850] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 39.509302] scsi2 : SCSI emulation for USB Mass Storage devices
[ 39.509358] scsi3 : SCSI emulation for USB Mass Storage devices
[ 49.656012] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:822: emu1010: Special config.
[ 49.656129] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:861: emu1010: EMU_HANA_ID=0x3f
[ 49.656131] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:880: emu1010: filename emu/emu0404.fw testing
[ 50.133242] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:684: firmware size=0xd67c
[ 51.511277] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:897: emu1010: Hana Firmware loaded
[ 51.511324] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:900: Hana ver:1.1
[ 51.511381] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:905: emu1010: Card options=0x1
[ 51.511406] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:907: emu1010: Card options=0x1
[ 51.511892] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:945: emu1010: Card options3=0x1
[ 51.528167] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/emu10k1_main.c:226: Audigy2 value: Special config.
[ 51.528394] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/../../alsa-kernel/pci/emu10k1/emufx.c
EMU outputs on[ 51.528397] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/../../alsa-kernel/pci/emu10k1/emufx.c
EMU2 inputs onanders@anders-desktop:~$
Sorry för det jobbiga messandet, finns det nå't bra sät att lägga in svar från tex dmesg , där jag får väldigt mycket, utan att behöva dela upp detså här??
Anders.L
Re: Ljud i 8.04 med E-mu0404
Hallå??
Tröttnade ni ; )
Kommer ingenstans med detta.
Får fippla runt lite eller installera om skiten men det tror jag inte hjälper eftersom vi var tvungna att göra allt jobbet efter "normal" installation.............
Lev väl
Anders.L
/FoX
Tröttnade ni ; )
Kommer ingenstans med detta.
Får fippla runt lite eller installera om skiten men det tror jag inte hjälper eftersom vi var tvungna att göra allt jobbet efter "normal" installation.............
Lev väl
Anders.L
/FoX