webbcam silvercrest??

Skriv svar
dannzz
Inlägg: 31
Blev medlem: 20 sep 2007, 01:40
Ort: sundsvall

webbcam silvercrest??

Inlägg av dannzz »

hur installerar man webbcam silvercrest på ubuntu 7.10 :P
what i've done
Upp
Användarvisningsbild
HenrikAn
Inlägg: 1436
Blev medlem: 17 jun 2006, 21:39
OS: Ubuntu
Utgåva: 22.10 Kinetic Kudu
Ort: Hägersten

SV: webbcam silvercrest??

Inlägg av HenrikAn »

Webbkameror är tyvärr ett knepigt område. Har man tur (eller kollar upp vad man ska köpa) är det bara att plugga in kameran och köra. Har man otur funkar det inte alls.

För att se vad det är för modell, kan du öppna ett terminalfönster och köra kommandot lsusb.
Vad får du för svar då?

(Kommandot lsusb listar alla saker anslutna till usb-bussen)
Senast redigerad av 1 HenrikAn, redigerad totalt 11 gånger.
The Net interprets censorship as damage and routes around it.
- John Gilmore
Upp
dannzz
Inlägg: 31
Blev medlem: 20 sep 2007, 01:40
Ort: sundsvall

SV: webbcam silvercrest??

Inlägg av dannzz »

okej.

men då ska ja kolla upp de när ja kommer hem om typ 1 timme eller så eller kom på ja kommer inte hinna kolla upp de nu på morgonen för ska till tandläkaren 20 över 8 *sigh* men de blir nog efter de ja kommer kolla upp de :D men om de inte går ddå? vad ska man göra då ??
what i've done
Upp
Användarvisningsbild
HenrikAn
Inlägg: 1436
Blev medlem: 17 jun 2006, 21:39
OS: Ubuntu
Utgåva: 22.10 Kinetic Kudu
Ort: Hägersten

SV: webbcam silvercrest??

Inlägg av HenrikAn »

Ja, vi får väl se vad det kan vara för något, men finns det inte någon drivrutin för chipsetet i din kamera är det inte så mycket att göra.
Köpa en ny och kanske skriva till tillverkaren och klaga.

Lycka till med tandläkaren!
The Net interprets censorship as damage and routes around it.
- John Gilmore
Upp
dannzz
Inlägg: 31
Blev medlem: 20 sep 2007, 01:40
Ort: sundsvall

SV: webbcam silvercrest??

Inlägg av dannzz »

Bus 007 Device 001: ID 0000:0000 
Bus 006 Device 001: ID 0000:0000 
Bus 004 Device 005: ID 09da:000e A4 Tech Co., Ltd
Bus 004 Device 001: ID 0000:0000 
Bus 005 Device 002: ID 093a:2600 Pixart Imaging, Inc.
Bus 005 Device 001: ID 0000:0000 
Bus 003 Device 001: ID 0000:0000 
Bus 002 Device 001: ID 0000:0000 
Bus 001 Device 001: ID 0000:0000 

står de när ja kollar de för kollade upp de nu medans ja hinner
what i've done
Upp
dannzz
Inlägg: 31
Blev medlem: 20 sep 2007, 01:40
Ort: sundsvall

SV: webbcam silvercrest??

Inlägg av dannzz »

vad ska man göra nu då? eftersom ja ha kollat upp de
what i've done
Upp
Användarvisningsbild
HenrikAn
Inlägg: 1436
Blev medlem: 17 jun 2006, 21:39
OS: Ubuntu
Utgåva: 22.10 Kinetic Kudu
Ort: Hägersten

SV: webbcam silvercrest??

Inlägg av HenrikAn »

Vad jag kan förstå av: http://mxhaard.free.fr/spca5xx.html ska det gå att få igång kameran...

Vad för du för resultat om du kör lsmod i ett terminalfönster?

(lsmod listar alla laddade kärnmoduler)
The Net interprets censorship as damage and routes around it.
- John Gilmore
Upp
dannzz
Inlägg: 31
Blev medlem: 20 sep 2007, 01:40
Ort: sundsvall

SV: webbcam silvercrest??

Inlägg av dannzz »

Module                  Size  Used by
usbhid                29536  0
hid                    28928  1 usbhid
af_packet              24840  2
snd_rtctimer            4384  0
ppp_deflate            7040  0
zlib_deflate          20504  1 ppp_deflate
bsd_comp                7040  0
ppp_async              13184  0
crc_ccitt              3072  1 ppp_async
ipv6                  273892  10
ppp_generic            29332  3 ppp_deflate,bsd_comp,ppp_async
slhc                    7552  1 ppp_generic
isofs                  36412  0
i915                  25856  2
drm                    83348  3 i915
binfmt_misc            12936  1
rfcomm                42136  2
l2cap                  26240  11 rfcomm
bluetooth              57060  4 rfcomm,l2cap
ppdev                  10244  0
cpufreq_userspace      5280  0
cpufreq_stats          7232  0
cpufreq_ondemand        9612  0
freq_table              5792  2 cpufreq_stats,cpufreq_ondemand
cpufreq_powersave      2688  0
cpufreq_conservative    8072  0
battery                11012  0
button                  8976  0
container              5504  0
video                  18060  0
sbs                    19592  0
ac                      6148  0
dock                  10656  0
parport_pc            37412  0
lp                    12580  0
parport                37448  3 ppdev,parport_pc,lp
joydev                11328  0
snd_hda_intel        263712  1
snd_pcm_oss            44672  0
snd_mixer_oss          17664  2 snd_pcm_oss
snd_pcm                80388  2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy          4740  0
snd_seq_oss            33152  0
snd_seq_midi            9600  0
snd_rawmidi            25728  1 snd_seq_midi
ath_pci                98336  0
snd_seq_midi_event      8448  2 snd_seq_oss,snd_seq_midi
snd_seq                53232  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              24324  3 snd_rtctimer,snd_pcm,snd_seq
snd_seq_device          9228  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
option                11008  0
usbserial              34920  1 option
psmouse                39952  0
wlan                  206660  1 ath_pci
serio_raw              8068  0
ath_hal              192720  1 ath_pci
sky2                  46852  0
snd                    54660  9 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              8800  2 snd
snd_page_alloc        11400  2 snd_hda_intel,snd_pcm
shpchp                34580  0
pci_hotplug            32704  1 shpchp
intel_agp              25620  1
agpgart                35016  3 drm,intel_agp
evdev                  11136  5
ext3                  133896  1
jbd                    60456  1 ext3
mbcache                9732  1 ext3
sd_mod                30336  3
usb_storage            73024  0
ide_core              116804  1 usb_storage
libusual              18448  1 usb_storage
sg                    36764  0
sr_mod                17828  0
cdrom                  37536  1 sr_mod
ata_generic            8452  0
ahci                  23300  2
ata_piix              17540  0
libata                125168  3 ata_generic,ahci,ata_piix
scsi_mod              147084  5 sd_mod,usb_storage,sg,sr_mod,libata
ehci_hcd              36492  0
uhci_hcd              26640  0
usbcore              138632  8 usbhid,option,usbserial,usb_storage,libusual,ehci_hcd,uhci_hcd
thermal                14344  0
processor              32072  1 thermal
fan                    5764  0
fuse                  47124  1
apparmor              40728  0
commoncap              8320  1 apparmor
what i've done
Upp
Användarvisningsbild
HenrikAn
Inlägg: 1436
Blev medlem: 17 jun 2006, 21:39
OS: Ubuntu
Utgåva: 22.10 Kinetic Kudu
Ort: Hägersten

SV: webbcam silvercrest??

Inlägg av HenrikAn »

Jag har inte någon liknande kamera själv så jag har lite svårt att verifiera, därför blir det många frågor... :)
Det ska finnas stöd för drivrutinen som behövs i Ubuntu, däremot hittade jag den här felrapporten: https://bugs.launchpad.net/ubuntu/+bug/151684

Kan du klippa in dom sista 20-30 raderna från svaret du få då du pluggar in webkameran och sedan kör dmesg i ett terminalfönster?

(dmesg ("diagnostic message") skriver ut kärnans meddelandebuffer vilket är till stor hjälp när man felsöker)
Senast redigerad av 1 HenrikAn, redigerad totalt 13 gånger.
The Net interprets censorship as damage and routes around it.
- John Gilmore
Upp
dannzz
Inlägg: 31
Blev medlem: 20 sep 2007, 01:40
Ort: sundsvall

SV: webbcam silvercrest??

Inlägg av dannzz »

[  11.850083]  IO window: 2000-2fff
[  11.850089]  MEM window: f6000000-f7ffffff
[  11.850094]  PREFETCH window: f0000000-f1ffffff
[  11.850101] PCI: Bridge: 0000:00:1c.1
[  11.850104]  IO window: 3000-3fff
[  11.850110]  MEM window: f8000000-f9ffffff
[  11.850115]  PREFETCH window: f2000000-f3ffffff
[  11.850121] PCI: Bridge: 0000:00:1c.2
[  11.850125]  IO window: 4000-4fff
[  11.850131]  MEM window: fa000000-fbffffff
[  11.850136]  PREFETCH window: f4000000-f5ffffff
[  11.850143] PCI: Bridge: 0000:00:1e.0
[  11.850144]  IO window: disabled.
[  11.850150]  MEM window: disabled.
[  11.850154]  PREFETCH window: disabled.
[  11.850188] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[  11.850196] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[  11.850221] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 17 (level, low) -> IRQ 17
[  11.850227] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[  11.850253] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[  11.850259] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[  11.850274] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[  11.850285] NET: Registered protocol family 2
[  11.887360] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[  11.887443] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[  11.888383] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[  11.888786] TCP: Hash tables configured (established 131072 bind 65536)
[  11.888789] TCP reno registered
[  11.899479] checking if image is initramfs... it is
[  12.545765] Freeing initrd memory: 7349k freed
[  12.545895] Simple Boot Flag at 0x36 set to 0x1
[  12.546206] audit: initializing netlink socket (disabled)
[  12.546219] audit(1197438012.112:1): initialized
[  12.546285] highmem bounce pool size: 64 pages
[  12.547860] VFS: Disk quotas dquot_6.5.1
[  12.547900] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[  12.547978] io scheduler noop registered
[  12.547980] io scheduler anticipatory registered
[  12.547982] io scheduler deadline registered
[  12.547994] io scheduler cfq registered (default)
[  12.548007] Boot video device is 0000:00:02.0
[  12.548193] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[  12.548257] assign_interrupt_mode Found MSI capability
[  12.548260] Allocate Port Service[0000:00:1c.0:pcie00]
[  12.548290] Allocate Port Service[0000:00:1c.0:pcie02]
[  12.548390] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[  12.548453] assign_interrupt_mode Found MSI capability
[  12.548455] Allocate Port Service[0000:00:1c.1:pcie00]
[  12.548483] Allocate Port Service[0000:00:1c.1:pcie02]
[  12.548581] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[  12.548644] assign_interrupt_mode Found MSI capability
[  12.548646] Allocate Port Service[0000:00:1c.2:pcie00]
[  12.548673] Allocate Port Service[0000:00:1c.2:pcie02]
[  12.548818] isapnp: Scanning for PnP cards...
[  12.903278] isapnp: No Plug & Play device found
[  12.921876] Real Time Clock Driver v1.12ac
[  12.922105] hpet_resources: 0xfed00000 is busy
[  12.922124] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
what i've done
Upp
Användarvisningsbild
HenrikAn
Inlägg: 1436
Blev medlem: 17 jun 2006, 21:39
OS: Ubuntu
Utgåva: 22.10 Kinetic Kudu
Ort: Hägersten

SV: webbcam silvercrest??

Inlägg av HenrikAn »

Är du säker på att du pluggat in kameran innan du körde dmesg?
Lyser någon diod på kameran?
Vad händer om du kör sudo modprobe gspca? (dvs laddar den drivrutin som enligt tidigare länk bör fungera)
Lyser någon diod på kameran nu?
Vad blir resultatet av en ny lsmod och dmesg nu?
The Net interprets censorship as damage and routes around it.
- John Gilmore
Upp
dannzz
Inlägg: 31
Blev medlem: 20 sep 2007, 01:40
Ort: sundsvall

SV: webbcam silvercrest??

Inlägg av dannzz »

ja har 6 deiod lampor och dom lysser när ja kopplar inte den
what i've done
Upp
dannzz
Inlägg: 31
Blev medlem: 20 sep 2007, 01:40
Ort: sundsvall

SV: webbcam silvercrest??

Inlägg av dannzz »

på lsmod får ja detta

Module                  Size  Used by
gspca                608336  0
videodev              29312  1 gspca
v4l2_common            18432  1 videodev
v4l1_compat            15364  1 videodev
usbhid                29536  0
hid                    28928  1 usbhid
af_packet              24840  2
snd_rtctimer            4384  0
ppp_deflate            7040  0
zlib_deflate          20504  1 ppp_deflate
bsd_comp                7040  0
ppp_async              13184  0
crc_ccitt              3072  1 ppp_async
ipv6                  273892  10
ppp_generic            29332  3 ppp_deflate,bsd_comp,ppp_async
slhc                    7552  1 ppp_generic
isofs                  36412  0
i915                  25856  2
drm                    83348  3 i915
binfmt_misc            12936  1
rfcomm                42136  2
l2cap                  26240  11 rfcomm
bluetooth              57060  4 rfcomm,l2cap
ppdev                  10244  0
cpufreq_userspace      5280  0
cpufreq_stats          7232  0
cpufreq_ondemand        9612  0
freq_table              5792  2 cpufreq_stats,cpufreq_ondemand
cpufreq_powersave      2688  0
cpufreq_conservative    8072  0
battery                11012  0
button                  8976  0
container              5504  0
video                  18060  0
sbs                    19592  0
ac                      6148  0
dock                  10656  0
parport_pc            37412  0
lp                    12580  0
parport                37448  3 ppdev,parport_pc,lp
joydev                11328  0
snd_hda_intel        263712  2
snd_pcm_oss            44672  0
snd_mixer_oss          17664  2 snd_pcm_oss
snd_pcm                80388  2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy          4740  0
snd_seq_oss            33152  0
snd_seq_midi            9600  0
snd_rawmidi            25728  1 snd_seq_midi
ath_pci                98336  0
snd_seq_midi_event      8448  2 snd_seq_oss,snd_seq_midi
snd_seq                53232  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              24324  3 snd_rtctimer,snd_pcm,snd_seq
snd_seq_device          9228  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
option                11008  0
usbserial              34920  1 option
psmouse                39952  0
wlan                  206660  1 ath_pci
serio_raw              8068  0
ath_hal              192720  1 ath_pci
sky2                  46852  0
snd                    54660  11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              8800  2 snd
snd_page_alloc        11400  2 snd_hda_intel,snd_pcm
shpchp                34580  0
pci_hotplug            32704  1 shpchp
intel_agp              25620  1
agpgart                35016  3 drm,intel_agp
evdev                  11136  5
ext3                  133896  1
jbd                    60456  1 ext3
mbcache                9732  1 ext3
sd_mod                30336  3
usb_storage            73024  0
ide_core              116804  1 usb_storage
libusual              18448  1 usb_storage
sg                    36764  0
sr_mod                17828  0
cdrom                  37536  1 sr_mod
ata_generic            8452  0
ahci                  23300  2
ata_piix              17540  0
libata                125168  3 ata_generic,ahci,ata_piix
scsi_mod              147084  5 sd_mod,usb_storage,sg,sr_mod,libata
ehci_hcd              36492  0
uhci_hcd              26640  0
usbcore              138632  9 gspca,usbhid,option,usbserial,usb_storage,libusual,ehci_hcd,uhci_hcd
thermal                14344  0
processor              32072  1 thermal
fan                    5764  0
fuse                  47124  1
apparmor              40728  0
commoncap              8320  1 apparmor
what i've done
Upp
dannzz
Inlägg: 31
Blev medlem: 20 sep 2007, 01:40
Ort: sundsvall

SV: webbcam silvercrest??

Inlägg av dannzz »

på dmesg

och på dmesg får ja
[  11.850188] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[  11.850196] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[  11.850221] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 17 (level, low) -> IRQ 17
[  11.850227] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[  11.850253] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[  11.850259] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[  11.850274] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[  11.850285] NET: Registered protocol family 2
[  11.887360] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[  11.887443] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[  11.888383] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[  11.888786] TCP: Hash tables configured (established 131072 bind 65536)
[  11.888789] TCP reno registered
[  11.899479] checking if image is initramfs... it is
[  12.545765] Freeing initrd memory: 7349k freed
[  12.545895] Simple Boot Flag at 0x36 set to 0x1
[  12.546206] audit: initializing netlink socket (disabled)
[  12.546219] audit(1197438012.112:1): initialized
[  12.546285] highmem bounce pool size: 64 pages
[  12.547860] VFS: Disk quotas dquot_6.5.1
[  12.547900] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[  12.547978] io scheduler noop registered
[  12.547980] io scheduler anticipatory registered
[  12.547982] io scheduler deadline registered
[  12.547994] io scheduler cfq registered (default)[  11.850188] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[  11.850196] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[  11.850221] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 17 (level, low) -> IRQ 17
[  11.850227] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[  11.850253] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[  11.850259] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[  11.850274] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[  11.850285] NET: Registered protocol family 2
[  11.887360] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[  11.887443] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[  11.888383] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[  11.888786] TCP: Hash tables configured (established 131072 bind 65536)
[  11.888789] TCP reno registered
[  11.899479] checking if image is initramfs... it is
[  12.545765] Freeing initrd memory: 7349k freed
[  12.545895] Simple Boot Flag at 0x36 set to 0x1
[  12.546206] audit: initializing netlink socket (disabled)
[  12.546219] audit(1197438012.112:1): initialized
[  12.546285] highmem bounce pool size: 64 pages
[  12.547860] VFS: Disk quotas dquot_6.5.1
[  12.547900] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[  12.547978] io scheduler noop registered
[  12.547980] io scheduler anticipatory registered
[  12.547982] io scheduler deadline registered
[  12.547994] io scheduler cfq registered (default)
[  12.548007] Boot video device is 0000:00:02.0
[  12.548193] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[  12.548257] assign_interrupt_mode Found MSI capability
[  12.548260] Allocate Port Service[0000:00:1c.0:pcie00]
[  12.548290] Allocate Port Service[0000:00:1c.0:pcie02]
[  12.548390] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[  12.548453] assign_interrupt_mode Found MSI capability
[  12.548455] Allocate Port Service[0000:00:1c.1:pcie00]
[  12.548483] Allocate Port Service[0000:00:1c.1:pcie02]
[  12.548581] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[  12.548644] assign_interrupt_mode Found MSI capability
[  12.548646] Allocate Port Service[0000:00:1c.2:pcie00]
[  12.548673] Allocate Port Service[0000:00:1c.2:pcie02]
[  12.548818] isapnp: Scanning for PnP cards...
[  12.903278] isapnp: No Plug & Play device found
[  12.921876] Real Time Clock Driver v1.12ac
[  12.922105] hpet_resources: 0xfed00000 is busy
[  12.922124] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[  12.923178] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[  12.923338] input: Macintosh mouse button emulation as /class/input/input0
[  12.923406] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[  12.934181] i8042.c: Detected active multiplexing controller, rev 1.1.
[  12.939914] serio: i8042 KBD port at 0x60,0x64 irq 1
[  12.939920] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[  12.939922] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[  12.939924] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[  12.939926] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[  12.940108] mice: PS/2 mouse device common for all mice
[  12.940808] EISA: Probing bus 0 at eisa.0
[  12.940816] Cannot allocate resource for EISA slot 1
[  12.940819] Cannot allocate resource for EISA slot 2
[  12.940821] Cannot allocate resource for EISA slot 3
[  12.940823] Cannot allocate resource for EISA slot 4
[  12.940842] EISA: Detected 0 cards.
[  12.940925] TCP cubic registered
[  12.940940] NET: Registered protocol family 1
[  12.940964] Using IPI No-Shortcut mode
[  12.941116]  Magic number: 3:598:668
[  12.941397] Freeing unused kernel memory: 364k freed
[  13.302878] input: AT Translated Set 2 keyboard as /class/input/input1
[  14.230640] AppArmor: AppArmor initialized<5>audit(1197438013.612:2):  type=1505 info="AppArmor initialized" pid=1233
[  14.238693] fuse init (API version 7.8)
[  14.242974] Failure registering capabilities with primary security module.
[  14.263709] Monitor-Mwait will be used to enter C-1 state
[  14.263713] Monitor-Mwait will be used to enter C-2 state
[  14.263715] Monitor-Mwait will be used to enter C-3 state
[  14.263719] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[  14.263732] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[    3.056000] Marking TSC unstable due to: possible TSC halt in C2.
[    3.060000] Time: hpet clocksource has been installed.
[    3.064000] ACPI: Thermal Zone [TZS0] (26 C)
[    3.068000] ACPI: Thermal Zone [TZS1] (34 C)
[    3.532000] usbcore: registered new interface driver usbfs
[    3.532000] usbcore: registered new interface driver hub
[    3.532000] usbcore: registered new device driver usb
[    3.532000] USB Universal Host Controller Interface driver v3.0
[    3.532000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19
[    3.532000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    3.532000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.532000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.532000] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00001820
[    3.532000] usb usb1: configuration #1 chosen from 1 choice
[    3.532000] hub 1-0:1.0: USB hub found
what i've done
Upp
dannzz
Inlägg: 31
Blev medlem: 20 sep 2007, 01:40
Ort: sundsvall

SV: webbcam silvercrest??

Inlägg av dannzz »

[    3.532000] hub 1-0:1.0: 2 ports detected
[    3.636000] ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 20
[    3.636000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    3.636000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    3.636000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    3.636000] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840
[    3.636000] usb usb2: configuration #1 chosen from 1 choice
[    3.636000] hub 2-0:1.0: USB hub found
[    3.636000] hub 2-0:1.0: 2 ports detected
[    3.684000] SCSI subsystem initialized
[    3.692000] libata version 2.21 loaded.
[    3.740000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
[    3.740000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.740000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.740000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    3.740000] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001860
[    3.740000] usb usb3: configuration #1 chosen from 1 choice
[    3.740000] hub 3-0:1.0: USB hub found
[    3.740000] hub 3-0:1.0: 2 ports detected
[    3.844000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 17 (level, low) -> IRQ 17
[    3.844000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.844000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.844000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    3.844000] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
[    3.844000] usb usb4: configuration #1 chosen from 1 choice
[    3.844000] hub 4-0:1.0: USB hub found
[    3.844000] hub 4-0:1.0: 2 ports detected
[    3.948000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    3.948000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.948000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.948000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[    3.948000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    3.948000] usb usb5: configuration #1 chosen from 1 choice
[    3.948000] hub 5-0:1.0: USB hub found
[    3.948000] hub 5-0:1.0: 2 ports detected
[    4.000000] Clocksource tsc unstable (delta = -156879850 ns)
[    4.052000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 19
[    4.052000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    4.052000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    4.052000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[    4.052000] ehci_hcd 0000:00:1a.7: debug port 1
[    4.052000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[    4.052000] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc404800
[    4.056000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    4.056000] usb usb6: configuration #1 chosen from 1 choice
[    4.056000] hub 6-0:1.0: USB hub found
[    4.056000] hub 6-0:1.0: 4 ports detected
[    4.160000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
[    4.160000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    4.160000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.160000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    4.160000] ehci_hcd 0000:00:1d.7: debug port 1
[    4.160000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    4.160000] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc404c00
[    4.164000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    4.164000] usb usb7: configuration #1 chosen from 1 choice
[    4.164000] hub 7-0:1.0: USB hub found
[    4.164000] hub 7-0:1.0: 6 ports detected
[    4.268000] ata_piix 0000:00:1f.1: version 2.11
[    4.268000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 22
[    4.268000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    4.268000] scsi0 : ata_piix
[    4.268000] scsi1 : ata_piix
[    4.268000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
[    4.268000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
[    4.588000] ata1.00: ATAPI: Optiarc DVD RW AD-7560A, DX06, max UDMA/33
[    4.760000] ata1.00: configured for UDMA/33
[    4.928000] scsi 0:0:0:0: CD-ROM            Optiarc  DVD RW AD-7560A  DX06 PQ: 0 ANSI: 5
[    4.928000] ahci 0000:00:1f.2: version 2.2
[    4.928000] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 22
[    4.944000] usb 4-1: new full speed USB device using uhci_hcd and address 2
[    4.944000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.944000] Uniform CD-ROM driver Revision: 3.20
[    4.944000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    4.948000] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    5.100000] usb 4-1: configuration #1 chosen from 1 choice
[    5.112000] usbcore: registered new interface driver libusual
[    5.120000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    5.120000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    5.120000] Initializing USB Mass Storage driver...
[    5.120000] scsi2 : SCSI emulation for USB Mass Storage devices
[    5.120000] usb-storage: device found at 2
[    5.120000] usb-storage: waiting for device to settle before scanning
[    5.120000] usbcore: registered new interface driver usb-storage
[    5.120000] USB Mass Storage support registered.
[    5.932000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    5.932000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    5.932000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    5.932000] scsi3 : ahci
[    5.932000] scsi4 : ahci
[    5.932000] scsi5 : ahci
[    5.932000] ata3: SATA max UDMA/133 cmd 0xf8852100 ctl 0x00000000 bmdma 0x00000000 irq 22
[    5.932000] ata4: SATA max UDMA/133 cmd 0xf8852180 ctl 0x00000000 bmdma 0x00000000 irq 22
[    5.932000] ata5: SATA max UDMA/133 cmd 0xf8852200 ctl 0x00000000 bmdma 0x00000000 irq 22
[    6.416000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    6.752000] ata3.00: ATA-7: TOSHIBA MK8037GSX, DL250J, max UDMA/100
[    6.752000] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    6.752000] ata3.00: configured for UDMA/100
[    7.064000] ata4: SATA link down (SStatus 0 SControl 300)
[    7.376000] ata5: SATA link down (SStatus 0 SControl 300)
[    7.376000] scsi 3:0:0:0: Direct-Access    ATA      TOSHIBA MK8037GS DL25 PQ: 0 ANSI: 5
[    7.376000] scsi 3:0:0:0: Attached scsi generic sg1 type 0
[    7.384000] sd 3:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[    7.384000] sd 3:0:0:0: [sda] Write Protect is off
[    7.384000] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.384000] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.384000] sd 3:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[    7.384000] sd 3:0:0:0: [sda] Write Protect is off
[    7.384000] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.384000] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.384000]  sda: sda1 sda2 < sda5 >
[    7.484000] sd 3:0:0:0: [sda] Attached SCSI disk
[    7.736000] Attempting manual resume
[    7.736000] swsusp: Resume From Partition 8:5
[    7.736000] PM: Checking swsusp image.
[    7.736000] PM: Resume from disk failed.
[    7.780000] kjournald starting.  Commit interval 5 seconds
[    7.780000] EXT3-fs: mounted filesystem with ordered data mode.
[  10.120000] usb-storage: device scan complete
[  10.124000] scsi 2:0:0:0: CD-ROM            HUAWEI  Mass Storage    2.31 PQ: 0 ANSI: 2
[  10.156000] sr1: scsi-1 drive
[  10.156000] sr 2:0:0:0: Attached scsi CD-ROM sr1
[  10.156000] sr 2:0:0:0: Attached scsi generic sg2 type 5
[  14.980000] Linux agpgart interface v0.102 (c) Dave Jones
[  14.984000] agpgart: Detected an Intel 965GM Chipset.
[  14.984000] agpgart: Detected 7676K stolen memory.
[  14.996000] agpgart: AGP aperture is 256M @ 0xd0000000
[  15.432000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  15.436000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  15.852000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[  15.852000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[  15.852000] sky2 0000:02:00.0: v1.18 addr 0xf6000000 irq 16 Yukon-FE (0xb7) rev 3
[  15.852000] sky2 eth0: addr 00:1d:72:05:88:ef
[  15.880000] ath_hal: module license 'Proprietary' taints kernel.
[  15.880000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[  16.404000] wlan: 0.8.4.2 (0.9.3.2)
[  16.492000] usbcore: registered new interface driver usbserial
[  16.492000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[  16.492000] usbcore: registered new interface driver usbserial_generic
[  16.492000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial Driver core
[  16.496000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
[  16.496000] usbcore: registered new interface driver option
[  16.496000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
[  16.632000] ath_pci: 0.9.4.5 (0.9.3.2)
[  16.632000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[  16.632000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[  16.684000] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
[  16.684000] ACPI: PCI interrupt for device 0000:04:00.0 disabled
[  16.940000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
[  16.940000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[  17.160000] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000
[  17.208000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[  17.984000] lp: driver loaded but no devices found
[  18.024000] Adding 3004112k swap on /dev/sda5.  Priority:-1 extents:1 across:3004112k
[  18.256000] EXT3 FS on sda1, internal journal
[  19.268000] usb 4-1: USB disconnect, address 2
[  19.508000] usb 4-1: new full speed USB device using uhci_hcd and address 3
[  19.596000] No dock devices found.
[  19.624000] ACPI: AC Adapter [ADP1] (off-line)
[  19.668000] usb 4-1: configuration #1 chosen from 1 choice
[  19.672000] option 4-1:1.0: GSM modem (1-port) converter detected
[  19.672000] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB0
[  19.676000] option 4-1:1.1: GSM modem (1-port) converter detected
[  19.676000] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1
[  19.676000] scsi6 : SCSI emulation for USB Mass Storage devices
[  19.676000] usb-storage: device found at 3
[  19.676000] usb-storage: waiting for device to settle before scanning
[  19.820000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[  19.888000] input: Power Button (FF) as /class/input/input3
[  19.892000] ACPI: Power Button (FF) [PWRF]
[  19.920000] input: Lid Switch as /class/input/input4
[  19.924000] ACPI: Lid Switch [liD0]
[  19.952000] input: Sleep Button (CM) as /class/input/input5
[  19.952000] ACPI: Sleep Button (CM) [SLPB]
[  20.048000] ACPI: Battery Slot [BAT0] (battery present)
[  21.288000] sky2 eth0: enabling interface
[  21.352000] ppdev: user-space parallel port driver
[  21.492000] audit(1197438032.366:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4981 profile="/usr/sbin/cupsd"
[  21.532000] apm: BIOS not found.
[  21.760000] Failure registering capabilities with primary security module.
[  21.964000] Bluetooth: Core ver 2.11
[  21.964000] NET: Registered protocol family 31
[  21.964000] Bluetooth: HCI device and connection manager initialized
[  21.964000] Bluetooth: HCI socket layer initialized
[  21.972000] Bluetooth: L2CAP ver 2.8
[  21.972000] Bluetooth: L2CAP socket layer initialized
[  22.032000] Bluetooth: RFCOMM socket layer initialized
[  22.032000] Bluetooth: RFCOMM TTY layer initialized
[  22.032000] Bluetooth: RFCOMM ver 1.8
[  24.676000] usb-storage: device scan complete
[  24.680000] scsi 6:0:0:0: CD-ROM            HUAWEI  Mass Storage    2.31 PQ: 0 ANSI: 2
[  24.700000] sr1: scsi3-mmc drive: 0x/0x caddy
[  24.700000] sr 6:0:0:0: Attached scsi CD-ROM sr1
[  24.700000] sr 6:0:0:0: Attached scsi generic sg2 type 5
[  24.912000] usb 4-1: reset full speed USB device using uhci_hcd and address 3
[  25.588000] usb 4-1: reset full speed USB device using uhci_hcd and address 3
[  25.708000] usb 4-1: device descriptor read/64, error -71
[  26.036000] [drm] Initialized drm 1.1.0 20060810
[  26.040000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[  26.040000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[  26.044000] usb 4-1: USB disconnect, address 3
[  26.044000] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  26.044000] option 4-1:1.0: device disconnected
[  26.044000] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  26.044000] option 4-1:1.1: device disconnected
[  26.068000] scsi 6:0:0:0: rejecting I/O to dead device
[  26.068000] scsi 6:0:0:0: rejecting I/O to dead device
[  40.116000] usb 4-1: new full speed USB device using uhci_hcd and address 4
[  40.276000] usb 4-1: configuration #1 chosen from 1 choice
[  40.280000] option 4-1:1.0: GSM modem (1-port) converter detected
[  40.280000] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB0
[  40.284000] option 4-1:1.1: GSM modem (1-port) converter detected
[  40.284000] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1
[  40.284000] scsi7 : SCSI emulation for USB Mass Storage devices
[  40.284000] usb-storage: device found at 4
[  40.284000] usb-storage: waiting for device to settle before scanning
[  45.284000] usb-storage: device scan complete
[  50.896000] usb 4-1: reset full speed USB device using uhci_hcd and address 4
[  51.060000] scsi 7:0:0:0: CD-ROM            HUAWEI  Mass Storage    2.31 PQ: 0 ANSI: 2
[  51.096000] sr1: scsi-1 drive
[  51.096000] sr 7:0:0:0: Attached scsi CD-ROM sr1
[  51.096000] sr 7:0:0:0: Attached scsi generic sg2 type 5
[  61.476000] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
[  61.476000] sr: Sense Key : No Sense [current]
what i've done
Upp
dannzz
Inlägg: 31
Blev medlem: 20 sep 2007, 01:40
Ort: sundsvall

SV: webbcam silvercrest??

Inlägg av dannzz »

[  61.476000] sr: Add. Sense: No additional sense information
[  61.804000] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
[  61.804000] sr: Sense Key : No Sense [current]
[  61.804000] sr: Add. Sense: No additional sense information
[  61.808000] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 28 00 00 00 00 10 00
[  61.808000] sr: Sense Key : No Sense [current]
[  61.808000] sr: Add. Sense: No additional sense information
[  61.816000] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 20 00 00 00 00 18 00
[  61.816000] sr: Sense Key : No Sense [current]
[  61.816000] sr: Add. Sense: No additional sense information
[  61.836000] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
[  61.836000] sr: Sense Key : No Sense [current]
[  61.836000] sr: Add. Sense: No additional sense information
[  61.844000] ISO 9660 Extensions: Microsoft Joliet Level 3
[  61.852000] ISOFS: changing to secondary root
[  109.184000] PPP generic driver version 2.4.2
[  109.232000] NET: Registered protocol family 10
[  109.232000] lo: Disabled Privacy Extensions
[  109.232000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  111.688000] PPP BSD Compression module registered
[  111.720000] PPP Deflate Compression module registered
[ 3162.652000] usb 4-1: USB disconnect, address 4
[ 3162.652000] option 4-1:1.0: device disconnected
[ 3162.652000] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 3162.652000] option 4-1:1.1: device disconnected
[ 3163.004000] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 3180.204000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 3180.204000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3182.396000] NET: Registered protocol family 17
[ 3241.104000] usb 4-1: new low speed USB device using uhci_hcd and address 5
[ 3241.276000] usb 4-1: configuration #1 chosen from 1 choice
[ 3241.384000] usbcore: registered new interface driver hiddev
[ 3241.400000] input: A4Tech PS/2+USB Mouse as /class/input/input6
[ 3241.400000] input: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.1-1
[ 3241.400000] usbcore: registered new interface driver usbhid
[ 3241.400000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 3409.936000] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 3410.168000] usb 5-1: configuration #1 chosen from 1 choice
[ 3718.328000] usb 5-1: USB disconnect, address 2
[ 9963.308000] sr0: CDROM not ready.  Make sure there is a disc in the drive.
[ 9979.620000] atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
[ 9979.620000] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[ 9979.776000] atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
[ 9979.776000] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[ 9982.412000] atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0).
[ 9982.412000] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
[ 9982.588000] atkbd.c: Unknown key released (translated set 2, code 0xb4 on isa0060/serio0).
[ 9982.588000] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
[10006.724000] atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0).
[10006.724000] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
[10006.928000] atkbd.c: Unknown key released (translated set 2, code 0xb4 on isa0060/serio0).
[10006.928000] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
[10007.284000] atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0).
[10007.284000] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
[10007.320000] atkbd.c: Unknown key released (translated set 2, code 0xb4 on isa0060/serio0).
[10007.320000] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
[10007.652000] atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0).
[10007.652000] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
[10007.700000] atkbd.c: Unknown key released (translated set 2, code 0xb4 on isa0060/serio0).
[10007.700000] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
[41983.084000] usb 4-1: USB disconnect, address 5
[49719.540000] usb 4-1: new low speed USB device using uhci_hcd and address 6
[49719.712000] usb 4-1: configuration #1 chosen from 1 choice
[49719.740000] input: A4Tech PS/2+USB Mouse as /class/input/input7
[49719.740000] input: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.1-1
[57910.548000] usb 4-1: USB disconnect, address 6
[60799.232000] usb 4-1: new low speed USB device using uhci_hcd and address 7
[60799.404000] usb 4-1: configuration #1 chosen from 1 choice
[60799.432000] input: A4Tech PS/2+USB Mouse as /class/input/input8
[60799.432000] input: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.1-1
[68382.364000] usb 5-1: new full speed USB device using uhci_hcd and address 3
[68382.592000] usb 5-1: configuration #1 chosen from 1 choice
[69484.864000] usb 5-1: USB disconnect, address 3
[69652.028000] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
[69652.028000] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
[69652.036000] atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0).
[69652.036000] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
[69652.552000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[69652.552000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
what i've done
Upp
dannzz
Inlägg: 31
Blev medlem: 20 sep 2007, 01:40
Ort: sundsvall

SV: webbcam silvercrest??

Inlägg av dannzz »

69652.560000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[69652.560000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[69743.512000] sr0: CDROM not ready.  Make sure there is a disc in the drive.
[71917.852000] TCP: Treason uncloaked! Peer 86.140.16.117:12714/57348 shrinks window 4027922969:4027930221. Repaired.
[119726.256000] usb 5-1: new full speed USB device using uhci_hcd and address 4
[119726.488000] usb 5-1: configuration #1 chosen from 1 choice
[120637.740000] usb 5-1: USB disconnect, address 4
[129237.764000] usb 5-1: new full speed USB device using uhci_hcd and address 5
[129237.996000] usb 5-1: configuration #1 chosen from 1 choice
[129266.804000] Linux video capture interface: v2.00
[129266.844000] usbcore: registered new interface driver gspca
[129266.844000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[129439.500000] TCP: Treason uncloaked! Peer 83.109.205.67:59979/6881 shrinks window 1284183320:1284186224. Repaired.
[129440.148000] TCP: Treason uncloaked! Peer 83.109.205.67:59979/6881 shrinks window 1284183320:1284186224. Repaired.
[129441.444000] TCP: Treason uncloaked! Peer 83.109.205.67:59979/6881 shrinks window 1284183320:1284186224. Repaired.
[129444.036000] TCP: Treason uncloaked! Peer 83.109.205.67:59979/6881 shrinks window 1284183320:1284186224. Repaired.

[  12.548007] Boot video device is 0000:00:02.0
[  12.548193] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[  12.548257] assign_interrupt_mode Found MSI capability
[  12.548260] Allocate Port Service[0000:00:1c.0:pcie00]
[  12.548290] Allocate Port Service[0000:00:1c.0:pcie02]
[  12.548390] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[  12.548453] assign_interrupt_mode Found MSI capability
[  12.548455] Allocate Port Service[0000:00:1c.1:pcie00]
[  12.548483] Allocate Port Service[0000:00:1c.1:pcie02]
[  12.548581] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[  12.548644] assign_interrupt_mode Found MSI capability
[  12.548646] Allocate Port Service[0000:00:1c.2:pcie00]
[  12.548673] Allocate Port Service[0000:00:1c.2:pcie02]
[  12.548818] isapnp: Scanning for PnP cards...
[  12.903278] isapnp: No Plug & Play device found
[  12.921876] Real Time Clock Driver v1.12ac
[  12.922105] hpet_resources: 0xfed00000 is busy
[  12.922124] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[  12.923178] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[  12.923338] input: Macintosh mouse button emulation as /class/input/input0
[  12.923406] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[  12.934181] i8042.c: Detected active multiplexing controller, rev 1.1.
[  12.939914] serio: i8042 KBD port at 0x60,0x64 irq 1
[  12.939920] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[  12.939922] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[  12.939924] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[  12.939926] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[  12.940108] mice: PS/2 mouse device common for all mice
[  12.940808] EISA: Probing bus 0 at eisa.0
[  12.940816] Cannot allocate resource for EISA slot 1
[  12.940819] Cannot allocate resource for EISA slot 2
[  12.940821] Cannot allocate resource for EISA slot 3
[  12.940823] Cannot allocate resource for EISA slot 4
[  12.940842] EISA: Detected 0 cards.
[  12.940925] TCP cubic registered
[  12.940940] NET: Registered protocol family 1
[  12.940964] Using IPI No-Shortcut mode
[  12.941116]  Magic number: 3:598:668
[  12.941397] Freeing unused kernel memory: 364k freed
[  13.302878] input: AT Translated Set 2 keyboard as /class/input/input1
[  14.230640] AppArmor: AppArmor initialized<5>audit(1197438013.612:2):  type=1505 info="AppArmor initialized" pid=1233
[  14.238693] fuse init (API version 7.8)
[  14.242974] Failure registering capabilities with primary security module.
[  14.263709] Monitor-Mwait will be used to enter C-1 state
[  14.263713] Monitor-Mwait will be used to enter C-2 state
[  14.263715] Monitor-Mwait will be used to enter C-3 state
[  14.263719] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[  14.263732] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[    3.056000] Marking TSC unstable due to: possible TSC halt in C2.
[    3.060000] Time: hpet clocksource has been installed.
[    3.064000] ACPI: Thermal Zone [TZS0] (26 C)
[    3.068000] ACPI: Thermal Zone [TZS1] (34 C)
[    3.532000] usbcore: registered new interface driver usbfs
[    3.532000] usbcore: registered new interface driver hub
[    3.532000] usbcore: registered new device driver usb
[    3.532000] USB Universal Host Controller Interface driver v3.0
[    3.532000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19
[    3.532000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    3.532000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.532000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.532000] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00001820
[    3.532000] usb usb1: configuration #1 chosen from 1 choice
[    3.532000] hub 1-0:1.0: USB hub found
[    3.532000] hub 1-0:1.0: 2 ports detected
[    3.636000] ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 20
[    3.636000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    3.636000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    3.636000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    3.636000] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840
[    3.636000] usb usb2: configuration #1 chosen from 1 choice
[    3.636000] hub 2-0:1.0: USB hub found
[    3.636000] hub 2-0:1.0: 2 ports detected
[    3.684000] SCSI subsystem initialized
[    3.692000] libata version 2.21 loaded.
[    3.740000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
[    3.740000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.740000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.740000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    3.740000] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001860
[    3.740000] usb usb3: configuration #1 chosen from 1 choice
[    3.740000] hub 3-0:1.0: USB hub found
[    3.740000] hub 3-0:1.0: 2 ports detected
[    3.844000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 17 (level, low) -> IRQ 17
[    3.844000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.844000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.844000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    3.844000] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
[    3.844000] usb usb4: configuration #1 chosen from 1 choice
[    3.844000] hub 4-0:1.0: USB hub found
[    3.844000] hub 4-0:1.0: 2 ports detected
[    3.948000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    3.948000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.948000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.948000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[    3.948000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    3.948000] usb usb5: configuration #1 chosen from 1 choice
[    3.948000] hub 5-0:1.0: USB hub found
[    3.948000] hub 5-0:1.0: 2 ports detected
[    4.000000] Clocksource tsc unstable (delta = -156879850 ns)
[    4.052000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 19
[    4.052000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    4.052000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    4.052000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[    4.052000] ehci_hcd 0000:00:1a.7: debug port 1
[    4.052000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[    4.052000] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc404800
[    4.056000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    4.056000] usb usb6: configuration #1 chosen from 1 choice
[    4.056000] hub 6-0:1.0: USB hub found
[    4.056000] hub 6-0:1.0: 4 ports detected
[    4.160000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
what i've done
Upp
dannzz
Inlägg: 31
Blev medlem: 20 sep 2007, 01:40
Ort: sundsvall

SV: webbcam silvercrest??

Inlägg av dannzz »

[    4.160000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    4.160000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.160000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    4.160000] ehci_hcd 0000:00:1d.7: debug port 1
[    4.160000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    4.160000] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc404c00
[    4.164000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    4.164000] usb usb7: configuration #1 chosen from 1 choice
[    4.164000] hub 7-0:1.0: USB hub found
[    4.164000] hub 7-0:1.0: 6 ports detected
[    4.268000] ata_piix 0000:00:1f.1: version 2.11
[    4.268000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 22
[    4.268000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    4.268000] scsi0 : ata_piix
[    4.268000] scsi1 : ata_piix
[    4.268000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
[    4.268000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
[    4.588000] ata1.00: ATAPI: Optiarc DVD RW AD-7560A, DX06, max UDMA/33
[    4.760000] ata1.00: configured for UDMA/33
[    4.928000] scsi 0:0:0:0: CD-ROM            Optiarc  DVD RW AD-7560A  DX06 PQ: 0 ANSI: 5
[    4.928000] ahci 0000:00:1f.2: version 2.2
[    4.928000] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 22
[    4.944000] usb 4-1: new full speed USB device using uhci_hcd and address 2
[    4.944000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.944000] Uniform CD-ROM driver Revision: 3.20
[    4.944000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    4.948000] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    5.100000] usb 4-1: configuration #1 chosen from 1 choice
[    5.112000] usbcore: registered new interface driver libusual
[    5.120000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    5.120000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    5.120000] Initializing USB Mass Storage driver...
[    5.120000] scsi2 : SCSI emulation for USB Mass Storage devices
[    5.120000] usb-storage: device found at 2
[    5.120000] usb-storage: waiting for device to settle before scanning
[    5.120000] usbcore: registered new interface driver usb-storage
[    5.120000] USB Mass Storage support registered.
[    5.932000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    5.932000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    5.932000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    5.932000] scsi3 : ahci
[    5.932000] scsi4 : ahci
[    5.932000] scsi5 : ahci
[    5.932000] ata3: SATA max UDMA/133 cmd 0xf8852100 ctl 0x00000000 bmdma 0x00000000 irq 22
[    5.932000] ata4: SATA max UDMA/133 cmd 0xf8852180 ctl 0x00000000 bmdma 0x00000000 irq 22
[    5.932000] ata5: SATA max UDMA/133 cmd 0xf8852200 ctl 0x00000000 bmdma 0x00000000 irq 22
[    6.416000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    6.752000] ata3.00: ATA-7: TOSHIBA MK8037GSX, DL250J, max UDMA/100
[    6.752000] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    6.752000] ata3.00: configured for UDMA/100
[    7.064000] ata4: SATA link down (SStatus 0 SControl 300)
[    7.376000] ata5: SATA link down (SStatus 0 SControl 300)
[    7.376000] scsi 3:0:0:0: Direct-Access    ATA      TOSHIBA MK8037GS DL25 PQ: 0 ANSI: 5
[    7.376000] scsi 3:0:0:0: Attached scsi generic sg1 type 0
[    7.384000] sd 3:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[    7.384000] sd 3:0:0:0: [sda] Write Protect is off
[    7.384000] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.384000] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.384000] sd 3:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[    7.384000] sd 3:0:0:0: [sda] Write Protect is off
[    7.384000] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.384000] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.384000]  sda: sda1 sda2 < sda5 >
what i've done
Upp
dannzz
Inlägg: 31
Blev medlem: 20 sep 2007, 01:40
Ort: sundsvall

SV: webbcam silvercrest??

Inlägg av dannzz »

[    7.484000] sd 3:0:0:0: [sda] Attached SCSI disk
[    7.736000] Attempting manual resume
[    7.736000] swsusp: Resume From Partition 8:5
[    7.736000] PM: Checking swsusp image.
[    7.736000] PM: Resume from disk failed.
[    7.780000] kjournald starting.  Commit interval 5 seconds
[    7.780000] EXT3-fs: mounted filesystem with ordered data mode.
[  10.120000] usb-storage: device scan complete
[  10.124000] scsi 2:0:0:0: CD-ROM            HUAWEI  Mass Storage    2.31 PQ: 0 ANSI: 2
[  10.156000] sr1: scsi-1 drive
[  10.156000] sr 2:0:0:0: Attached scsi CD-ROM sr1
[  10.156000] sr 2:0:0:0: Attached scsi generic sg2 type 5
[  14.980000] Linux agpgart interface v0.102 (c) Dave Jones
[  14.984000] agpgart: Detected an Intel 965GM Chipset.
[  14.984000] agpgart: Detected 7676K stolen memory.
[  14.996000] agpgart: AGP aperture is 256M @ 0xd0000000
[  15.432000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  15.436000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  15.852000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[  15.852000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[  15.852000] sky2 0000:02:00.0: v1.18 addr 0xf6000000 irq 16 Yukon-FE (0xb7) rev 3
[  15.852000] sky2 eth0: addr 00:1d:72:05:88:ef
[  15.880000] ath_hal: module license 'Proprietary' taints kernel.
[  15.880000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[  16.404000] wlan: 0.8.4.2 (0.9.3.2)
[  16.492000] usbcore: registered new interface driver usbserial
[  16.492000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[  16.492000] usbcore: registered new interface driver usbserial_generic
[  16.492000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial Driver core
[  16.496000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
[  16.496000] usbcore: registered new interface driver option
[  16.496000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
[  16.632000] ath_pci: 0.9.4.5 (0.9.3.2)
[  16.632000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[  16.632000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[  16.684000] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
[  16.684000] ACPI: PCI interrupt for device 0000:04:00.0 disabled
[  16.940000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
[  16.940000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[  17.160000] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000
[  17.208000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[  17.984000] lp: driver loaded but no devices found
[  18.024000] Adding 3004112k swap on /dev/sda5.  Priority:-1 extents:1 across:3004112k
[  18.256000] EXT3 FS on sda1, internal journal
[  19.268000] usb 4-1: USB disconnect, address 2
[  19.508000] usb 4-1: new full speed USB device using uhci_hcd and address 3
[  19.596000] No dock devices found.
[  19.624000] ACPI: AC Adapter [ADP1] (off-line)
[  19.668000] usb 4-1: configuration #1 chosen from 1 choice
[  19.672000] option 4-1:1.0: GSM modem (1-port) converter detected
[  19.672000] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB0
[  19.676000] option 4-1:1.1: GSM modem (1-port) converter detected
[  19.676000] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1
[  19.676000] scsi6 : SCSI emulation for USB Mass Storage devices
[  19.676000] usb-storage: device found at 3
[  19.676000] usb-storage: waiting for device to settle before scanning
[  19.820000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[  19.888000] input: Power Button (FF) as /class/input/input3
[  19.892000] ACPI: Power Button (FF) [PWRF]
[  19.920000] input: Lid Switch as /class/input/input4
[  19.924000] ACPI: Lid Switch [liD0]
[  19.952000] input: Sleep Button (CM) as /class/input/input5
[  19.952000] ACPI: Sleep Button (CM) [SLPB]
[  20.048000] ACPI: Battery Slot [BAT0] (battery present)
[  21.288000] sky2 eth0: enabling interface
[  21.352000] ppdev: user-space parallel port driver
[  21.492000] audit(1197438032.366:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4981 profile="/usr/sbin/cupsd"
[  21.532000] apm: BIOS not found.
[  21.760000] Failure registering capabilities with primary security module.
[  21.964000] Bluetooth: Core ver 2.11
[  21.964000] NET: Registered protocol family 31
[  21.964000] Bluetooth: HCI device and connection manager initialized
[  21.964000] Bluetooth: HCI socket layer initialized
[  21.972000] Bluetooth: L2CAP ver 2.8
[  21.972000] Bluetooth: L2CAP socket layer initialized
[  22.032000] Bluetooth: RFCOMM socket layer initialized
[  22.032000] Bluetooth: RFCOMM TTY layer initialized
[  22.032000] Bluetooth: RFCOMM ver 1.8
[  24.676000] usb-storage: device scan complete
[  24.680000] scsi 6:0:0:0: CD-ROM            HUAWEI  Mass Storage    2.31 PQ: 0 ANSI: 2
[  24.700000] sr1: scsi3-mmc drive: 0x/0x caddy
[  24.700000] sr 6:0:0:0: Attached scsi CD-ROM sr1
[  24.700000] sr 6:0:0:0: Attached scsi generic sg2 type 5
[  24.912000] usb 4-1: reset full speed USB device using uhci_hcd and address 3
[  25.588000] usb 4-1: reset full speed USB device using uhci_hcd and address 3
[  25.708000] usb 4-1: device descriptor read/64, error -71
[  26.036000] [drm] Initialized drm 1.1.0 20060810
[  26.040000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
what i've done
Upp
dannzz
Inlägg: 31
Blev medlem: 20 sep 2007, 01:40
Ort: sundsvall

SV: webbcam silvercrest??

Inlägg av dannzz »

[  26.040000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[  26.044000] usb 4-1: USB disconnect, address 3
[  26.044000] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  26.044000] option 4-1:1.0: device disconnected
[  26.044000] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  26.044000] option 4-1:1.1: device disconnected
[  26.068000] scsi 6:0:0:0: rejecting I/O to dead device
[  26.068000] scsi 6:0:0:0: rejecting I/O to dead device
[  40.116000] usb 4-1: new full speed USB device using uhci_hcd and address 4
[  40.276000] usb 4-1: configuration #1 chosen from 1 choice
[  40.280000] option 4-1:1.0: GSM modem (1-port) converter detected
[  40.280000] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB0
[  40.284000] option 4-1:1.1: GSM modem (1-port) converter detected
[  40.284000] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1
[  40.284000] scsi7 : SCSI emulation for USB Mass Storage devices
[  40.284000] usb-storage: device found at 4
[  40.284000] usb-storage: waiting for device to settle before scanning
[  45.284000] usb-storage: device scan complete
[  50.896000] usb 4-1: reset full speed USB device using uhci_hcd and address 4
[  51.060000] scsi 7:0:0:0: CD-ROM            HUAWEI  Mass Storage    2.31 PQ: 0 ANSI: 2
[  51.096000] sr1: scsi-1 drive
[  51.096000] sr 7:0:0:0: Attached scsi CD-ROM sr1
[  51.096000] sr 7:0:0:0: Attached scsi generic sg2 type 5
[  61.476000] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
[  61.476000] sr: Sense Key : No Sense [current]
[  61.476000] sr: Add. Sense: No additional sense information
[  61.804000] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
[  61.804000] sr: Sense Key : No Sense [current]
[  61.804000] sr: Add. Sense: No additional sense information
[  61.808000] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 28 00 00 00 00 10 00
[  61.808000] sr: Sense Key : No Sense [current]
[  61.808000] sr: Add. Sense: No additional sense information
[  61.816000] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 20 00 00 00 00 18 00
[  61.816000] sr: Sense Key : No Sense [current]
[  61.816000] sr: Add. Sense: No additional sense information
[  61.836000] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
[  61.836000] sr: Sense Key : No Sense [current]
[  61.836000] sr: Add. Sense: No additional sense information
[  61.844000] ISO 9660 Extensions: Microsoft Joliet Level 3
[  61.852000] ISOFS: changing to secondary root
[  109.184000] PPP generic driver version 2.4.2
[  109.232000] NET: Registered protocol family 10
[  109.232000] lo: Disabled Privacy Extensions
[  109.232000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  111.688000] PPP BSD Compression module registered
[  111.720000] PPP Deflate Compression module registered
[ 3162.652000] usb 4-1: USB disconnect, address 4
[ 3162.652000] option 4-1:1.0: device disconnected
[ 3162.652000] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 3162.652000] option 4-1:1.1: device disconnected
[ 3163.004000] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 3180.204000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 3180.204000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3182.396000] NET: Registered protocol family 17
[ 3241.104000] usb 4-1: new low speed USB device using uhci_hcd and address 5
[ 3241.276000] usb 4-1: configuration #1 chosen from 1 choice
[ 3241.384000] usbcore: registered new interface driver hiddev
[ 3241.400000] input: A4Tech PS/2+USB Mouse as /class/input/input6
[ 3241.400000] input: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.1-1
[ 3241.400000] usbcore: registered new interface driver usbhid
[ 3241.400000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 3409.936000] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 3410.168000] usb 5-1: configuration #1 chosen from 1 choice
[ 3718.328000] usb 5-1: USB disconnect, address 2
[ 9963.308000] sr0: CDROM not ready.  Make sure there is a disc in the drive.
[ 9979.620000] atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
[ 9979.620000] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[ 9979.776000] atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
[ 9979.776000] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[ 9982.412000] atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0).
[ 9982.412000] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
what i've done
Upp
Skriv svar

Återgå till "För nybörjaren - inaktuell"