Skärmupplösning Xubuntu 6.10

[J0henz]

Hur kan jag få högre skärmupplösning än 800x600, eller är det den högsta, på Windows XP kan jag få upp till 1280x1024.
Jag har ett ATI Mobility Radeon X1300 grafikkort.

Här är innehållet i /etc/X11/xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#  sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier    "Default Layout"
Screen      0  "aticonfig-Screen[0]" 0 0
InputDevice    "Generic Keyboard"
InputDevice    "Configured Mouse"
InputDevice    "stylus" "SendCoreEvents"
InputDevice    "cursor" "SendCoreEvents"
InputDevice    "eraser" "SendCoreEvents"
InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"

# path to defoma fonts
FontPath    "/usr/share/X11/fonts/misc"
FontPath    "/usr/share/X11/fonts/cyrillic"
FontPath    "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath    "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath    "/usr/share/X11/fonts/Type1"
FontPath    "/usr/share/X11/fonts/100dpi"
FontPath    "/usr/share/X11/fonts/75dpi"
FontPath    "/usr/share/fonts/X11/misc"
FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load  "i2c"
Load  "bitmap"
Load  "ddc"
Load  "dri"
Load  "extmod"
Load  "freetype"
Load  "glx"
Load  "int10"
Load  "type1"
Load  "vbe"
EndSection

Section "InputDevice"
Identifier  "Generic Keyboard"
Driver      "kbd"
Option     "CoreKeyboard"
Option     "XkbRules" "xorg"
Option     "XkbModel" "pc105"
Option     "XkbLayout" "se"
Option     "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier  "Configured Mouse"
Driver      "mouse"
Option     "CorePointer"
Option     "Device" "/dev/input/mice"
Option     "Protocol" "ExplorerPS/2"
Option     "ZAxisMapping" "4 5"
Option     "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier  "Synaptics Touchpad"
Driver      "synaptics"
Option     "SendCoreEvents" "true"
Option     "Device" "/dev/psaux"
Option     "Protocol" "auto-dev"
Option     "HorizScrollDelta" "0"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
Identifier  "stylus"
Driver      "wacom"
Option     "Device" "/dev/wacom"          # Change to
Option     "Type" "stylus"
Option     "ForceDevice" "ISDV4"              # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
Identifier  "eraser"
Driver      "wacom"
Option     "Device" "/dev/wacom"          # Change to
Option     "Type" "eraser"
Option     "ForceDevice" "ISDV4"              # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
Identifier  "cursor"
Driver      "wacom"
Option     "Device" "/dev/wacom"          # Change to
Option     "Type" "cursor"
Option     "ForceDevice" "ISDV4"              # Tablet PC ONLY
EndSection

Section "Monitor"
Identifier  "Generic Monitor"
Option     "DPMS"
EndSection

Section "Monitor"
Identifier  "aticonfig-Monitor[0]"
Option     "VendorName" "ATI Proprietary Driver"
Option     "ModelName" "Generic Autodetecting Monitor"
Option     "DPMS" "true"
EndSection

Section "Device"
Identifier  "ATI Technologies, Inc. ATI Default Card"
Driver      "vesa"
BusID      "PCI:1:0:0"
EndSection

Section "Device"
Identifier  "aticonfig-Device[0]"
Driver      "fglrx"
EndSection

Section "Screen"
Identifier "Default Screen"
Device    "ATI Technologies, Inc. ATI Default Card"
Monitor    "Generic Monitor"
DefaultDepth    24
SubSection "Display"
Depth    1
Modes    "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth    4
Modes    "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth    8
Modes    "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth    15
Modes    "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth    16
Modes    "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth    24
Modes    "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]"
Device    "aticonfig-Device[0]"
Monitor    "aticonfig-Monitor[0]"
DefaultDepth    24
SubSection "Display"
Viewport  0 0
Depth    24
EndSubSection
EndSection

Section "DRI"
Mode        0666
EndSection

[nicefinger]

Det kan du nog få. Visa innehållet i filen /etc/X11/xorg.conf här så kan säkert nån hjälpa dig. Berätta också vad du har för grafikkort.

[ycc]

Jag är ingen expert, men jag hade samma läge, då gjorde jag:
1. säkerhetskopiera:
sudo cp /etc/X11/xorg.conf   /etc/X11/xorg.conf.backup
2.sudo dpkg-reconfigure xserver-xorg
Det ökade upplösningen en del. Det sista steget, för att få maximal upplösning var att ändra den här delen av etc/X11/xorg.conf:

Kod: Markera allt

SubSection "Display"
      Depth     1
      Modes    "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     4
      Modes    "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     8
      Modes    "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     15
      Modes    "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     16
      Modes    "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     24
      Modes    "1024x768" "800x600" "640x480"
   EndSubSection

Helt enkelt manuellt lägga till den upplösning jag visste kortet klarade.