Ubuntu Sverige

Hej alla ubuntuister!

Jag har verkligen ett problem som jag länge har brottats med.

Jag försöker att koppla in en extern hårddisk i min dator men får inte den att fungera.
Jag kör med fiesty fawn och har ntfs -3g installerat och det funkar.

Problemet verkar ha med USB 2 enheter. När jag kopplar in den mountar den efter lång tid.
Försöker jag sedan att kopiera eller köra filer från den så avmonteras partionen eller så går det jättesakta.

Den externa hårdisken fungerar i XP.
Har testat andra externa hårdiskar och får inte det heller att fungera i ubuntu.

Och en sak till är att datorn har ett PCI kort med usb 2 portar installerat. Och det är genom den jag försökt att köra.

Jag har provat att laddat ur modulen ehci_hcd och får då den fungera som usb 1.1  och detta är inget problem.

Vad ska jag göra för att få min hårdisk att fungera som usb 2 i ubuntu????

Är det någon som överhuvudtaget fått sin externa usb 2 hårdisk att funger med fiesty fawn?

Min USB-disk fungerar utmärkt i Feisty. Har du kollat i /var/log/syslog efter felmeddelanden när disken monteras/avmonteras?

Min funkar att läsa ifrån, men inte att skriva till. Skulle gärna vilja veta varför!

Faidros skrev: Min funkar att läsa ifrån, men inte att skriva till. Skulle gärna vilja veta varför!

Skulle kunna vara något av följande:

• Du har inte installerat ordentligt NTFS-stöd, om det är en NTFS-hårddisk. (Kolla den här guiden).
• Du har inte monterat den med tillräckliga rättigheter.

Jag använder mig av ntfs-3g config  med ett extra paket som jag tror heter autoconfig. Jag har en annan hårdisk i datorn formaterad med ntfs och till den går det bra att skriva till.

Ska kolla log filen på en gång!!!

Del 1

Jun 13 11:13:23 murre-desktop kernel: [  692.284494] usb 5-2: new high speed USB device using ehci_hcd and address 3
Jun 13 11:13:24 murre-desktop kernel: [  692.423025] usb 5-2: configuration #1 chosen from 1 choice
Jun 13 11:13:24 murre-desktop kernel: [  692.424697] scsi1 : SCSI emulation for USB Mass Storage devices
Jun 13 11:13:24 murre-desktop kernel: [  692.425082] usb-storage: device found at 3
Jun 13 11:13:24 murre-desktop kernel: [  692.425086] usb-storage: waiting for device to settle before scanning
Jun 13 11:13:24 murre-desktop NetworkManager: <debug info>^I[1181726004.083285] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100').
Jun 13 11:13:24 murre-desktop NetworkManager: <debug info>^I[1181726004.523355] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100_if0').
Jun 13 11:13:24 murre-desktop NetworkManager: <debug info>^I[1181726004.572700] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100_usbraw').
Jun 13 11:13:29 murre-desktop kernel: [  697.420321] usb-storage: device scan complete
Jun 13 11:13:29 murre-desktop kernel: [  697.424441] scsi 1:0:0:0: Direct-Access    ST340014 A                3.06 PQ: 0 ANSI: 0 CCS
Jun 13 11:13:29 murre-desktop kernel: [  697.426139] SCSI device sdb: 78165360 512-byte hdwr sectors (40021 MB)
Jun 13 11:13:29 murre-desktop kernel: [  697.426768] sdb: Write Protect is off
Jun 13 11:13:29 murre-desktop kernel: [  697.426772] sdb: Mode Sense: 00 14 00 00
Jun 13 11:13:29 murre-desktop kernel: [  697.426775] sdb: assuming drive cache: write through
Jun 13 11:13:29 murre-desktop kernel: [  697.427762] SCSI device sdb: 78165360 512-byte hdwr sectors (40021 MB)
Jun 13 11:13:29 murre-desktop kernel: [  697.429101] sdb: Write Protect is off
Jun 13 11:13:29 murre-desktop kernel: [  697.429110] sdb: Mode Sense: 00 14 00 00
Jun 13 11:13:29 murre-desktop kernel: [  697.429113] sdb: assuming drive cache: write through
Jun 13 11:13:29 murre-desktop kernel: [  697.429121]  sdb: sdb1 <<6>usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:29 murre-desktop kernel: [  697.803873] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:29 murre-desktop kernel: [  698.055650] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:29 murre-desktop kernel: [  698.303442] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:30 murre-desktop kernel: [  698.440524]  sdb5 >
Jun 13 11:13:30 murre-desktop kernel: [  698.440686] sd 1:0:0:0: Attached scsi disk sdb
Jun 13 11:13:30 murre-desktop kernel: [  698.440767] sd 1:0:0:0: Attached scsi generic sg1 type 0
Jun 13 11:13:30 murre-desktop NetworkManager: <debug info>^I[1181726010.151698] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100_if0_scsi_host').
Jun 13 11:13:30 murre-desktop NetworkManager: <debug info>^I[1181726010.154377] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100_if0_scsi_host_scsi_device_lun0').
Jun 13 11:13:30 murre-desktop NetworkManager: <debug info>^I[1181726010.184325] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100_if0_scsi_host_scsi_device_lun0_scsi_generic').

Del 2

Jun 13 11:13:30 murre-desktop kernel: [  698.795014] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:30 murre-desktop kernel: [  699.050810] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:31 murre-desktop kernel: [  699.386517] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:31 murre-desktop kernel: [  699.774200] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:31 murre-desktop NetworkManager: <debug info>^I[1181726011.560639] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Myson_Century__Inc__USB_Mass_Storage_Device_100').
Jun 13 11:13:31 murre-desktop kernel: [  700.161859] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:32 murre-desktop kernel: [  700.445628] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:32 murre-desktop NetworkManager: <debug info>^I[1181726012.267678] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_part1_size_1024').
Jun 13 11:13:32 murre-desktop kernel: [  700.805345] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:32 murre-desktop kernel: [  701.093087] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:32 murre-desktop kernel: [  701.340877] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:33 murre-desktop kernel: [  701.592663] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:33 murre-desktop kernel: [  701.900431] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:33 murre-desktop kernel: [  702.156213] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:34 murre-desktop kernel: [  702.403983] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:34 murre-desktop kernel: [  702.655758] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:34 murre-desktop kernel: [  702.911543] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:34 murre-desktop kernel: [  703.159339] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:35 murre-desktop kernel: [  703.674906] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:35 murre-desktop kernel: [  703.934686] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:35 murre-desktop kernel: [  704.182471] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:36 murre-desktop kernel: [  704.434267] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:36 murre-desktop kernel: [  704.714033] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:36 murre-desktop kernel: [  704.961829] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:36 murre-desktop kernel: [  705.273561] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:37 murre-desktop kernel: [  705.525355] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:37 murre-desktop kernel: [  705.773137] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:37 murre-desktop NetworkManager: <debug info>^I[1181726017.552362] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_9D17_FA06').

Del 3

Jun 13 11:13:37 murre-desktop kernel: [  706.316683] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:38 murre-desktop kernel: [  706.564478] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:38 murre-desktop kernel: [  706.820263] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:38 murre-desktop kernel: [  707.080044] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:38 murre-desktop kernel: [  707.335835] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:39 murre-desktop kernel: [  707.679036] usb 5-2: device descriptor read/all, error -71
Jun 13 11:13:39 murre-desktop kernel: [  707.795439] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:39 murre-desktop kernel: [  707.928709] sd 1:0:0:0: SCSI error: return code = 0x00070000
Jun 13 11:13:39 murre-desktop kernel: [  707.928719] end_request: I/O error, dev sdb, sector 19238
Jun 13 11:13:39 murre-desktop hald: mounted /dev/sdb5 on behalf of uid 1000
Jun 13 11:13:43 murre-desktop kernel: [  712.071844] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:43 murre-desktop kernel: [  712.205193] sd 1:0:0:0: SCSI error: return code = 0x00070000
Jun 13 11:13:43 murre-desktop kernel: [  712.205202] end_request: I/O error, dev sdb, sector 20774
Jun 13 11:13:43 murre-desktop kernel: [  712.331628] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:44 murre-desktop kernel: [  712.767260] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:44 murre-desktop kernel: [  712.901481] sd 1:0:0:0: SCSI error: return code = 0x00070000
Jun 13 11:13:44 murre-desktop kernel: [  712.901489] end_request: I/O error, dev sdb, sector 17954151
Jun 13 11:13:44 murre-desktop kernel: [  713.039041] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:44 murre-desktop kernel: [  713.286834] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:45 murre-desktop kernel: [  713.554596] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:45 murre-desktop kernel: [  713.806386] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:45 murre-desktop kernel: [  714.062180] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:46 murre-desktop kernel: [  714.693636] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:46 murre-desktop kernel: [  714.827038] sd 1:0:0:0: SCSI error: return code = 0x00070000
Jun 13 11:13:46 murre-desktop kernel: [  714.827049] end_request: I/O error, dev sdb, sector 26074343
Jun 13 11:13:46 murre-desktop kernel: [  714.953417] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:46 murre-desktop kernel: [  715.245177] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:47 murre-desktop kernel: [  715.600868] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:47 murre-desktop kernel: [  715.734812] sd 1:0:0:0: SCSI error: return code = 0x00070000
Jun 13 11:13:47 murre-desktop kernel: [  715.734822] end_request: I/O error, dev sdb, sector 48800423
Jun 13 11:13:47 murre-desktop kernel: [  715.892640] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:47 murre-desktop kernel: [  716.184382] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:47 murre-desktop kernel: [  716.317810] sd 1:0:0:0: SCSI error: return code = 0x00070000
Jun 13 11:13:47 murre-desktop kernel: [  716.317820] end_request: I/O error, dev sdb, sector 38339367
Jun 13 11:13:48 murre-desktop kernel: [  716.452153] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:48 murre-desktop kernel: [  716.715950] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:48 murre-desktop kernel: [  716.963728] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:13:48 murre-desktop kernel: [  717.211528] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:14:25 murre-desktop kernel: [  753.856658] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:14:25 murre-desktop kernel: [  754.160395] usb 5-2: reset high speed USB device using ehci_hcd and address 3
Jun 13 11:14:30 murre-desktop kernel: [  759.288185] usb 5-2: failed to restore interface 0 altsetting 0 (error=-110)
Jun 13 11:14:30 murre-desktop kernel: [  759.288241] usb 5-2: USB disconnect, address 3
Jun 13 11:14:30 murre-desktop kernel: [  759.288703] printk: 5 messages suppressed.
Jun 13 11:14:30 murre-desktop kernel: [  759.288708] Buffer I/O error on device sdb5, logical block 54120232
Jun 13 11:14:30 murre-desktop kernel: [  759.288712] lost page write due to I/O error on sdb5
Jun 13 11:14:30 murre-desktop kernel: [  759.290459] sd 1:0:0:0: SCSI error: return code = 0x00010000
Jun 13 11:14:30 murre-desktop kernel: [  759.290464] end_request: I/O error, dev sdb, sector 6826
Jun 13 11:14:30 murre-desktop NetworkManager: <debug info>^I[1181726070.976742] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100_if0_scsi_host_scsi_device_lun0_scsi_generic').
Jun 13 11:14:30 murre-desktop hald[4731]: forcibly attempting to lazy unmount /dev/sdb5 as enclosing drive was disconnected

Del 4

Jun 13 11:14:31 murre-desktop kernel: [  759.406297] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.406537] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.406761] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.406988] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.407210] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.407437] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.407917] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.407990] usb 5-2: new high speed USB device using ehci_hcd and address 4
Jun 13 11:14:31 murre-desktop kernel: [  759.408719] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.408957] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.409187] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.409411] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.409637] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.409861] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.410087] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.410309] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.410545] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.411449] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.411811] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.412402] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.412642] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.412869] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.413099] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.413621] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.413871] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.414100] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.414343] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.414571] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.414799] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.415024] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.415312] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.415664] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.415892] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.416140] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.416410] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.416637] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.416867] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.417095] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.417324] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.417717] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.417965] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.418194] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.418436] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.418665] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.419742] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.420173] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.420419] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.420653] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.420886] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.421119] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.421351] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.421581] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.421812] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.422041] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.422272] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.422762] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.423010] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.423240] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.423470] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.423700] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.423929] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.425527] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.425947] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.426197] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.426450] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.426681] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.427984] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.428283] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.428526] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.428759] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.428994] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.429469] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.429722] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.429953] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.430246] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.430495] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.430730] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.430960] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.431238] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.431465] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.431700] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.431929] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.432220] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.432449] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.432681] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.432910] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.433141] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.433516] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.433767] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.434000] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.434234] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.434475] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.434710] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.435788] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.436118] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.436361] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.436597] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.437592] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.437958] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.438203] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.438456] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.438688] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.438923] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.439587] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.439845] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.440095] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.440336] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.440568] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.440805] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.441036] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.441273] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.441504] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.441740] FAT: FAT read failed (blocknr 6636)

Del 5

Jun 13 11:14:31 murre-desktop kernel: [  759.441971] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.442208] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.442446] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.442682] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.443793] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.444443] FAT: FAT read failed (blocknr 6636)
Jun 13 11:14:31 murre-desktop kernel: [  759.445667] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.540921] usb 5-2: configuration #1 chosen from 1 choice
Jun 13 11:14:31 murre-desktop kernel: [  759.541772] scsi2 : SCSI emulation for USB Mass Storage devices
Jun 13 11:14:31 murre-desktop kernel: [  759.541876] usb-storage: device found at 4
Jun 13 11:14:31 murre-desktop kernel: [  759.541879] usb-storage: waiting for device to settle before scanning
Jun 13 11:14:31 murre-desktop kernel: [  759.595676] scsi 1:0:0:0: rejecting I/O to dead device
Jun 13 11:14:31 murre-desktop kernel: [  759.596124] FAT: unable to read inode block for updating (i_pos 865923718)
Jun 13 11:14:31 murre-desktop NetworkManager: <debug info>^I[1181726071.509791] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_9D17_FA06').
Jun 13 11:14:31 murre-desktop NetworkManager: <debug info>^I[1181726071.513336] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_part1_size_1024').
Jun 13 11:14:31 murre-desktop NetworkManager: <debug info>^I[1181726071.516696] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100_if0_scsi_host_scsi_device_lun0').
Jun 13 11:14:31 murre-desktop NetworkManager: <debug info>^I[1181726071.520123] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100_usbraw').
Jun 13 11:14:31 murre-desktop NetworkManager: <debug info>^I[1181726071.524444] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100_if0').
Jun 13 11:14:31 murre-desktop NetworkManager: <debug info>^I[1181726071.542689] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100').
Jun 13 11:14:31 murre-desktop NetworkManager: <debug info>^I[1181726071.542934] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100').
Jun 13 11:14:31 murre-desktop NetworkManager: <debug info>^I[1181726071.566646] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100_if0').
Jun 13 11:14:31 murre-desktop NetworkManager: <debug info>^I[1181726071.578604] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Myson_Century__Inc__USB_Mass_Storage_Device_100').
Jun 13 11:14:31 murre-desktop NetworkManager: <debug info>^I[1181726071.578811] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100_usbraw').
Jun 13 11:14:31 murre-desktop NetworkManager: <debug info>^I[1181726071.582433] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100_if0_scsi_host').
Jun 13 11:14:36 murre-desktop kernel: [  764.535770] usb-storage: device scan complete
Jun 13 11:14:36 murre-desktop kernel: [  764.539891] scsi 2:0:0:0: Direct-Access    ST340014 A                3.06 PQ: 0 ANSI: 0 CCS
Jun 13 11:14:36 murre-desktop kernel: [  764.542135] SCSI device sdb: 78165360 512-byte hdwr sectors (40021 MB)
Jun 13 11:14:36 murre-desktop kernel: [  764.542960] sdb: Write Protect is off
Jun 13 11:14:36 murre-desktop kernel: [  764.542965] sdb: Mode Sense: 00 14 00 00
Jun 13 11:14:36 murre-desktop kernel: [  764.542969] sdb: assuming drive cache: write through
Jun 13 11:14:36 murre-desktop kernel: [  764.544119] SCSI device sdb: 78165360 512-byte hdwr sectors (40021 MB)
Jun 13 11:14:36 murre-desktop kernel: [  764.544706] sdb: Write Protect is off
Jun 13 11:14:36 murre-desktop kernel: [  764.544710] sdb: Mode Sense: 00 14 00 00
Jun 13 11:14:36 murre-desktop kernel: [  764.544713] sdb: assuming drive cache: write through
Jun 13 11:14:36 murre-desktop kernel: [  764.544718]  sdb: sdb1 < sdb5 >
Jun 13 11:14:36 murre-desktop kernel: [  764.550255] sd 2:0:0:0: Attached scsi disk sdb
Jun 13 11:14:36 murre-desktop kernel: [  764.550337] sd 2:0:0:0: Attached scsi generic sg1 type 0
Jun 13 11:14:36 murre-desktop NetworkManager: <debug info>^I[1181726076.266245] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100_if0_scsi_host').
Jun 13 11:14:36 murre-desktop NetworkManager: <debug info>^I[1181726076.272165] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100_if0_scsi_host_scsi_device_lun0').
Jun 13 11:14:36 murre-desktop NetworkManager: <debug info>^I[1181726076.322107] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4cf_8818_100_if0_scsi_host_scsi_device_lun0_scsi_generic').
Jun 13 11:14:36 murre-desktop kernel: [  764.795468] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:36 murre-desktop kernel: [  765.067214] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:36 murre-desktop NetworkManager: <debug info>^I[1181726076.970048] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Myson_Century__Inc__USB_Mass_Storage_Device_100').
Jun 13 11:14:37 murre-desktop kernel: [  765.454890] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:37 murre-desktop kernel: [  765.702667] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:37 murre-desktop kernel: [  765.950464] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:37 murre-desktop kernel: [  766.202253] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:38 murre-desktop kernel: [  766.450053] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:38 murre-desktop kernel: [  766.697874] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:38 murre-desktop kernel: [  766.831053] sd 2:0:0:0: SCSI error: return code = 0x00070000
Jun 13 11:14:38 murre-desktop kernel: [  766.831062] end_request: I/O error, dev sdb, sector 78165344
Jun 13 11:14:38 murre-desktop kernel: [  766.831070] Buffer I/O error on device sdb, logical block 9770668
Jun 13 11:14:38 murre-desktop kernel: [  766.949627] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:38 murre-desktop kernel: [  767.197421] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:39 murre-desktop kernel: [  767.445201] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:39 murre-desktop kernel: [  767.693074] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:39 murre-desktop kernel: [  767.944815] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:39 murre-desktop kernel: [  768.192565] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:39 murre-desktop kernel: [  768.325888] sd 2:0:0:0: SCSI error: return code = 0x00070000
Jun 13 11:14:39 murre-desktop kernel: [  768.325898] end_request: I/O error, dev sdb, sector 78165344
Jun 13 11:14:39 murre-desktop kernel: [  768.325905] Buffer I/O error on device sdb, logical block 9770668
Jun 13 11:14:40 murre-desktop kernel: [  768.440368] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:40 murre-desktop kernel: [  768.692151] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:40 murre-desktop kernel: [  768.940338] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:40 murre-desktop kernel: [  769.187739] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:41 murre-desktop kernel: [  769.439523] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:41 murre-desktop kernel: [  769.687316] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:41 murre-desktop kernel: [  769.821789] sd 2:0:0:0: SCSI error: return code = 0x00070000
Jun 13 11:14:41 murre-desktop kernel: [  769.821802] end_request: I/O error, dev sdb, sector 78165344
Jun 13 11:14:41 murre-desktop kernel: [  769.821811] Buffer I/O error on device sdb, logical block 9770668
Jun 13 11:14:41 murre-desktop kernel: [  770.162930] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:42 murre-desktop kernel: [  770.410708] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:42 murre-desktop kernel: [  770.762418] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:42 murre-desktop kernel: [  771.010207] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:42 murre-desktop kernel: [  771.262102] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:43 murre-desktop kernel: [  771.509796] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:43 murre-desktop kernel: [  771.757575] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:43 murre-desktop kernel: [  772.009363] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:43 murre-desktop kernel: [  772.143292] sd 2:0:0:0: SCSI error: return code = 0x00070000
Jun 13 11:14:43 murre-desktop kernel: [  772.143302] end_request: I/O error, dev sdb, sector 0
Jun 13 11:14:43 murre-desktop kernel: [  772.143309] Buffer I/O error on device sdb, logical block 0
Jun 13 11:14:43 murre-desktop kernel: [  772.143322] Buffer I/O error on device sdb, logical block 1
Jun 13 11:14:43 murre-desktop kernel: [  772.143327] Buffer I/O error on device sdb, logical block 2
Jun 13 11:14:43 murre-desktop kernel: [  772.143331] Buffer I/O error on device sdb, logical block 3
Jun 13 11:14:43 murre-desktop kernel: [  772.257154] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:44 murre-desktop NetworkManager: <debug info>^I[1181726084.081535] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_part1_size_1024').
Jun 13 11:14:44 murre-desktop kernel: [  772.576952] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:44 murre-desktop kernel: [  773.228344] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:45 murre-desktop kernel: [  773.536069] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:45 murre-desktop NetworkManager: <debug info>^I[1181726085.361317] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_9D17_FA06').
Jun 13 11:14:45 murre-desktop hald: mounted /dev/sdb5 on behalf of uid 1000
Jun 13 11:14:45 murre-desktop kernel: [  774.307420] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:46 murre-desktop kernel: [  774.442021] sd 2:0:0:0: SCSI error: return code = 0x00070000
Jun 13 11:14:46 murre-desktop kernel: [  774.442034] end_request: I/O error, dev sdb, sector 54120359
Jun 13 11:14:46 murre-desktop kernel: [  774.599179] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:46 murre-desktop kernel: [  774.850999] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:47 murre-desktop kernel: [  775.590367] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:47 murre-desktop kernel: [  775.724935] sd 2:0:0:0: SCSI error: return code = 0x00070000
Jun 13 11:14:47 murre-desktop kernel: [  775.724948] end_request: I/O error, dev sdb, sector 2845414
Jun 13 11:14:47 murre-desktop kernel: [  775.838157] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:47 murre-desktop kernel: [  775.971334] sd 2:0:0:0: SCSI error: return code = 0x00070000
Jun 13 11:14:47 murre-desktop kernel: [  775.971345] end_request: I/O error, dev sdb, sector 2845415
Jun 13 11:14:47 murre-desktop kernel: [  776.089933] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:48 murre-desktop kernel: [  776.341722] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:49 murre-desktop kernel: [  777.750307] usb 5-2: device descriptor read/all, error -71
Jun 13 11:14:49 murre-desktop kernel: [  777.864435] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:49 murre-desktop kernel: [  778.112226] usb 5-2: reset high speed USB device using ehci_hcd and address 4
Jun 13 11:14:50 murre-desktop kernel: [  778.368020] usb 5-2: reset high speed USB device using ehci_hcd and address 4

DeepThought skrev:

Faidros skrev: Min funkar att läsa ifrån, men inte att skriva till. Skulle gärna vilja veta varför!

Skulle kunna vara något av följande:

• Du har inte installerat ordentligt NTFS-stöd, om det är en NTFS-hårddisk. (Kolla den här guiden).
• Du har inte monterat den med tillräckliga rättigheter.

Nu går det inte alls att läsa den! 

Vad menar du !!!

Det där med "reset high speed USB device using ehci_hcd and address 3" och "rejecting I/O to dead device" ser ju inte alls bra ut. Man skulle nästan kunna tro att det är hårdvarufel, men det fungerar i Windows säger du. Mitt enda tips just nu är Google.

Håller med Lars, ser ut som ett hårdvarufel. Du får läsfel på vid monteringen.
En trolig orsak är att ditt PCI USB-kort strular pga dåligt hw-stöd för det kortet.
En annan orsak, men mindre trolig här då det funkar i Win, kan vara en för lång kabel.

Antar att du inte har andra USB-portar än dessa två, annars testa en annan port.

Murre skrev: Vad menar du !!!

Jag menar att jag körde tipset som länkades ovan..

mount denied, NTFS log file unclean.

Boot into windows TWICE.. *muttrar*

Jag har bara USB1 på datorn i övrigt. Mitt PCI kort är köpt på CLAS OHLSON.
Hårddisken funkar finfint med XP, men däremot har jag inte testat i XP.

Det konstiga är att kortet fungerar som usb 1.1.
Ska i allafall testa med att byta ut USB kortet.
Eller testa ubuntu  med en dator som har usb 2. 

Yessssss!
Det är kortet som det är fel på.
Fick det fungera på min bärbara, fungerade hur bra som helst.
Ska iväg idag och köpa ett annat usb 2 kort.