Ubuntu Sverige

Forum för Ubuntus svenska gemenskap
https://ubuntu-se.servebbs.org/

Posta din .conkyrc

https://ubuntu-se.servebbs.org/viewtopic.php?t=1957

Sida 6 av 12

SV: Posta din .conkyrc

Postat: 10 jan 2008, 22:45
av pl1sk3n
Jag tog bort °ringen sas i conkyrc & då vart jag av med Å.
Hellre enbart C än °C tycker jag.
Av nån anledning så har jag inte fått in tempen än,
varken före lr efter borttagning av ° ringen :-\
Funkar din Hund, hur gjorde du lr gick det på en gång?

SV: Posta din .conkyrc

Postat: 10 jan 2008, 23:07
av Hund
pl1sk3n skrev: Jag tog bort °ringen sas i conkyrc & då vart jag av med Å.
Hellre enbart C än °C tycker jag.
Av nån anledning så har jag inte fått in tempen än,
varken före lr efter borttagning av ° ringen :-\
Funkar din Hund, hur gjorde du lr gick det på en gång?
Den enda texten är ju:

Kod: Markera allt

{hddtemp /dev/sda
Hur får man då bort "°"? :P

Har du installerat paketet hddtemp?

SV: Posta din .conkyrc

Postat: 11 jan 2008, 10:58
av pl1sk3n
Använder du inte Lulle's script?
Om du gör det så tar du bara bort °ringen innan C
CPU1:    ${execi 2 cat /sys/bus/pci/drivers/k8temp/000*/temp1_input | cut -c1,2}°C
CPU2:    ${execi 2 cat /sys/bus/pci/drivers/k8temp/000*/temp3_input | cut -c1,2}°C
Ditt kodstycke säjer ju iofs nått annat.
Klarar hddtemp även av cpu?
Provade att lägga in 1 hddtemp men den visar bara N/A.
Jag har labbat med en mängd olika script.
Min conky har delar från både höger & vänster sas :P

Lägger in den här om nån är intresserad ;)

Kod: Markera allt

${color #00ff00}pl1sk3n${color #888888}@${color red}$nodename:
${color #888888}$sysname $kernel ${color #CCCCCC}on ${color #888888}$machine bit
${color #888888}Uptime: $uptime
${color #888888}${time %a,}${time %e %B %G}                     ${color #00ff00}${time %H:%M:%S}
${color white}${hr 2}

${color #ffccaa}System:
${color #888888}cpu1: ${color #CCCCCC}${freq cpu0} MHz    ${color #888888}load: ${color #CCCCCC}${cpu cpu0}%     ${color #888888}Core1 Temp: ${color #CCCCCC}${execi 2 cat /sys/bus/pci/drivers/k8temp/000*/temp1_input | cut -c1,2}C
${color #888888}cup2: ${color #CCCCCC}${freq cpu1} MHz    ${color #888888}load: ${color #CCCCCC}${cpu cpu1}%     ${color #888888}Core2 Temp: ${color #CCCCCC}${execi 2 cat /sys/bus/pci/drivers/k8temp/000*/temp3_input | cut -c1,2}C
${color #888888}${cpugraph 25 ff0000 ff00ff}
${color #888888}avg load: (${color #CCCCCC}$loadavg${color #888888})
${color #888888}processes: ${color #CCCCCC}$processes	${color #888888}running: ${color #CCCCCC}$running_processes
${color #888888}ram: ${color #CCCCCC}$mem${color #888888}/${color #CCCCCC}$memmax ${color #888888}, ${color #CCCCCC}$memperc%
${color #888888}GPU Nvidia                                                ${execi 30 nvidia-settings -q [gpu:0]/GPUCoreTemp | grep '):' | awk '{print $4}' | sed 's/\.//'}C
${color #888888}Battery: $color${battery}                                 ${hddtemp /dev/sda1} 

${color white}${hr 1}

${color #ffccaa}Wireless Network:                   ${color #888888}essid: $color${execi 5 iwconfig wlan0 | sed 's/  /\n/g' | grep ESSID | sed 's/ESSID:"//'| sed 's/"//'}
${color #888888}ip address: ${color #CCCCCC}${addr wlan0}
${color #888888}link status: $color${execi 2 iwconfig wlan0 | sed 's/  /\n/g' | grep Quality | sed 's/Link Quality://' | sed 's/Link Quality=//' | sed 's/ //g' } ${color #C2C3F3}s: $color${execi 5 iwconfig wlan0 | sed 's/  /\n/g' | grep Signal | sed 's/Signal level=//' | sed 's/Signal level://' }
${color #888888}total download: ${color #CCCCCC}${totaldown wlan0}	${color #888888}download speed: ${color #CCCCCC}${downspeed wlan0} k/s 	
${color #888888}${downspeedgraph wlan0 25,100 ff0000 0000ff}
${color #888888}total upload: ${color #CCCCCC}${totalup wlan0}          ${color #888888}upload speed: ${color #CCCCCC}${upspeed wlan0} k/s
${color #888888}${upspeedgraph wlan0 25,100 0000ff ff0000}     
${color white}${hr 1}

${color #ffccaa}File Systems:
${color #888888}ubuntu root: ${color #CCCCCC}${fs_used /}${color #888888}/${color #CCCCCC}${fs_size /} ${color #888888}(${color #CCCCCC}${fs_free /}, ${fs_free_perc /}% ${color #888888}free)
       ${fs_bar /}
${color #888888}win resque: ${color #CCCCCC}${fs_used /sda1}${color #888888}/${color #CCCCCC}${fs_size /sda1} ${color #888888}(${color #CCCCCC}${fs_free /sda1}, ${fs_free_perc /sda1}% ${color #888888}free)
       ${fs_bar /sda1}
${color #888888}vista: ${color #CCCCCC}${fs_used /media/sda2}${color #888888}/${color #CCCCCC}${fs_size /media/sda1} ${color #888888}(${color #CCCCCC}${fs_free /media/sda2}, ${fs_free_perc /media/sda2}% ${color #888888}free)
       ${fs_bar /media/sda2}
${color #888888}store ntfs: ${color #CCCCCC}${fs_used /media/sda4}${color #888888}/${color #CCCCCC}${fs_size /media/sda4} ${color #888888}(${color #CCCCCC}${fs_free /media/sda4}, ${fs_free_perc /media/sda4}% ${color #888888}free)
       ${fs_bar /media/sda4}
${color #888888}extended: ${color #CCCCCC}${fs_used /media/sda3}${color #888888}/${color #CCCCCC}${fs_size /media/sda3} ${color #888888}(${color #CCCCCC}${fs_free /media/sda3}, ${fs_free_perc /media/sda3}% ${color #888888}free)
       ${fs_bar /media/sda3}
${color #888888}mandriva: ${color #CCCCCC}${fs_used /media/sda5}${color #888888}/${color #CCCCCC}${fs_size /media/sda5} ${color #888888}(${color #CCCCCC}${fs_free /media/sda5}, ${fs_free_perc /media/sda5}% ${color #888888}free)
       ${fs_bar /media/sda5}
${color #888888}swap: ${color #CCCCCC}${fs_used /media/sda6}${color #888888}/${color #CCCCCC}${fs_size /media/sda6} ${color #888888}(${color #CCCCCC}${fs_free /media/sda6}, ${fs_free_perc /media/sda6}% ${color #888888}free)
       ${fs_bar /media/sda6}
${color #888888}labb: ${color #CCCCCC}${fs_used /media/sda7}${color #888888}/${color #CCCCCC}${fs_size /media/sda7} ${color #888888}(${color #CCCCCC}${fs_free /media/sda7}, ${fs_free_perc /media/sda7}% ${color #888888}free)
       ${fs_bar /media/sda7}
${color #888888}edubuntu: ${color #CCCCCC}${fs_used /media/sda8}${color #888888}/${color #CCCCCC}${fs_size /media/sda8} ${color #888888}(${color #CCCCCC}${fs_free /media/sda8}, ${fs_free_perc /media/sda8}% ${color #888888}free)
       ${fs_bar /media/sda8}
${color #888888}kubuntu: ${color #CCCCCC}${fs_used /media/sda9}${color #888888}/${color #CCCCCC}${fs_size /media/sda9} ${color #888888}(${color #CCCCCC}${fs_free /media/sda9}, ${fs_free_perc /media/sda9}% ${color #888888}free)
       ${fs_bar /media/sda9}
${color #888888}xubuntu: ${color #CCCCCC}${fs_used /media/sda10}${color #888888}/${color #CCCCCC}${fs_size /media/sda10} ${color #888888}(${color #CCCCCC}${fs_free /media/sda10}, ${fs_free_perc /media/sda10}% ${color #888888}free)
       ${fs_bar /media/sda10}
${color #888888}home: ${color #CCCCCC}${fs_used /media/sda11}${color #888888}/${color #CCCCCC}${fs_size /media/sda11} ${color #888888}(${color #CCCCCC}${fs_free /media/sda11}, ${fs_free_perc /media/sda11}% ${color #888888}free)
       ${fs_bar /media/sda11}
${color #888888}store reiser: ${color #CCCCCC}${fs_used /media/sdb1}${color #888888}/${color #CCCCCC}${fs_size /media/sdb1} ${color #888888}(${color #CCCCCC}${fs_free /media/sdb1}, ${fs_free_perc /media/sdb1}% ${color #888888}free)
       ${fs_bar /media/sdb1}
Det är tur att man inte sitter i Bossieman's sitts med en färdig dist ;D
Man måste ju ha nått att göra ;D ;D

SV: Posta din .conkyrc

Postat: 11 jan 2008, 15:53
av pl1sk3n
Tror nu att jag förstår vad du menar Hund ;)
Har samma problem med min hdd.
Men jag har fått ordnig på min cpu nu iaf.
Jag tog bort hela raden med k8temp & skrev in acpitemp itsället, så nu funkar det :D
Ska ta & försöka få ordning på filsystemet med hdd som inte visar rätt info.
Har just nu ingen aning om varför vissa funkar & vissa inte? 

Som den ser ut nu & delar av scriptet. 

Bild

SV: Posta din .conkyrc

Postat: 11 jan 2008, 17:59
av pl1sk3n
[quote="Lulle "]
Någon som har koden så att man kan få grafikkorts tempen och moderkort tempen?
[/quote

Den här funkar för mig;  ${color #888888}motherboard: ${color #CCCCCC}${hwmon temp}C
Annars kanske denna ;  MB:$color ${i2c temp 1}C
Du får väll antagligen ta bort/lägga till en del + ändra färger & sånt.
Ska pröva om jag kan få till ett script till mina minnen nu ::)

Hoppas du får till det ;)

SV: Posta din .conkyrc

Postat: 09 feb 2008, 16:16
av qwertan
Bild

Här är min Conky, inte helt färdig men fungerar utan problem.
Den består av 9 config filer, start script,script för väder och xmms
Anpassad för 1280*1024

Start script

Kod: Markera allt

sleep 10 &&
conky -c  /home/alex/.conky/conky/system -d &&
sleep 1 &&
conky -c  /home/alex/.conky/conky/processes -d &&
sleep 1 &&
conky -c  /home/alex/.conky/conky/cpu -d &&
sleep 1 &&
conky -c  /home/alex/.conky/conky/disk1 -d &&
sleep 1 &&
conky -c  /home/alex/.conky/conky/disk2 -d &&
sleep 1 &&
conky -c  /home/alex/.conky/conky/network -d &&
sleep 1 &&
conky -c  /home/alex/.conky/conky/cal -d &&
sleep 1 &&
conky -c  /home/alex/.conky/conky/weather -d &&
sleep 1 &&
conky -c  /home/alex/.conky/conky/mpd -d
System

Kod: Markera allt

#avoid flicker

double_buffer yes



#own window to run simultanious 2 or more conkys

own_window yes

own_window_transparent yes

own_window_type normal

own_window_hints undecorate,sticky,skip_taskbar,skip_pager 



#borders

draw_borders no

border_margin 1



#shades

draw_shades no



#position

gap_x 10

gap_y 48

alignment bottom_left



#behaviour

update_interval 1



#colour

default_color 0FDE08

#default_shade_color cccccc

own_window_colour 222222



#font

use_xft yes

xftfont Vibrocentric:pixelsize=10



#to prevent window from moving

use_spacer no

minimum_size 100 0

maximum_width 130 0



TEXT
$hr
$alignc System
$hr
System: $alignr${color 92CE0B}${font}${sysname}${color}
Kernel: $alignr${color 92CE0B}${font} ${kernel} ${color}
Arch: $alignr${color 92CE0B}${font}${machine}${color}

Uptime: $alignr${color 92CE0B}${font}${uptime_short} ${color} 
Date:$alignr${color 92CE0B}${time %a %d %b} ${color} 
Time:$alignr${color 92CE0B}${time %H.%M} ${color}

Cpu Temp: $alignr ${color 92CE0B}${font}${i2c temp 2}°${color}
MB Temp: $alignr ${color 92CE0B}${font}${i2c temp 1}°${color}
$hr
Processer

Kod: Markera allt

#avoid flicker

double_buffer yes



#own window to run simultanious 2 or more conkys

own_window yes

own_window_transparent yes

own_window_type normal

own_window_hints undecorate,sticky,skip_taskbar,skip_pager 



#borders

draw_borders no

border_margin 1



#shades

draw_shades no



#position

gap_x 150

gap_y 48

alignment bottom_left



#behaviour

update_interval 1



#colour

default_color 0FDE08

#default_shade_color cccccc

own_window_colour 222222



#font

use_xft yes

xftfont Vibrocentric:pixelsize=10



#to prevent window from moving

use_spacer no

minimum_size 140 0

maximum_width 140 0



TEXT
$hr 
$alignc Processes
$hr 
Processes: $alignr ${color 92CE0B}${font}$processes     ($running_processes)${color}
$alignc CPU Top
${top name 1}${color 92CE0B}$alignr${top cpu 1} ${top mem 1}${color}
${top name 2}${color 92CE0B}$alignr${top cpu 2} ${top mem 2}${color}
${top name 3}${color 92CE0B}$alignr${top cpu 3} ${top mem 3}${color}

$alignc MEM Top
${top_mem name 1}${color 92CE0B}$alignr${top_mem cpu 1} ${top_mem mem 1}${color}
${top_mem name 2}${color 92CE0B}$alignr${top_mem cpu 2} ${top_mem mem 2}${color}
${top_mem name 3}${color 92CE0B}$alignr${top_mem cpu 3} ${top_mem mem 3}${color}
$hr
Cpu/Ram

Kod: Markera allt

#avoid flicker

double_buffer yes



#own window to run simultanious 2 or more conkys

own_window yes

own_window_transparent yes

own_window_type normal

own_window_hints undecorate,sticky,skip_taskbar,skip_pager 



#borders

draw_borders no

border_margin 1



#shades

draw_shades no



#position

gap_x 300

gap_y 48

alignment bottom_left



#behaviour

update_interval 1



#colour

default_color 0FDE08

#default_shade_color cccccc

own_window_colour 222222



#font

use_xft yes

xftfont Vibrocentric:pixelsize=10



#to prevent window from moving

use_spacer no

minimum_size 130 0

maximum_width 130 0



TEXT
$hr 
$alignc Cpu/Ram
$hr 
Cpu Usage: $alignr${color 92CE0B}${font}${cpu}% ${color} 
Core1:$alignr Core2:
${color 92CE0B}${freq_dyn_g 1} GHz $alignr ${freq_dyn_g 2} GHz ${color}
${cpugraph cpu1 15,63}$alignr${cpugraph cpu2 15,63}

Ram:$alignr ${color 92CE0B}${font}${mem} ${color}
${memmax}: $alignr${membar 6,40}${color}
Swap:${alignr}${color 92CE0B}${font}${swap} ${color}
${swapmax}: $alignr${swapbar 6,40}${color}
$hr
Disk1

Kod: Markera allt

#avoid flicker

double_buffer yes



#own window to run simultanious 2 or more conkys

own_window yes

own_window_transparent yes

own_window_type normal

own_window_hints undecorate,sticky,skip_taskbar,skip_pager 



#borders

draw_borders no

border_margin 1



#shades

draw_shades no



#position

gap_x 440

gap_y 48

alignment bottom_left

#behaviour

update_interval 1



#colour

default_color 0FDE08

#default_shade_color cccccc

own_window_colour 222222



#font

use_xft yes

xftfont Vibrocentric:pixelsize=10



#to prevent window from moving

use_spacer no

minimum_size 100 0

maximum_size 100 0



TEXT
$hr ${color} 
$alignc Disks
$hr 
$alignc EXT3:
Root: $alignr${color 92CE0B}${font}${fs_free /} ${color}
${fs_size}: $alignr${fs_bar 6,40 }${color} 
Hdc6: $alignr${color 92CE0B}${font}${fs_free /media/hdc6} ${color} 
${fs_size /media/hdc6}:$alignr${fs_bar 6,40 /media/hdc6}${color}}${color}
$alignc NTFS:
Hdc5: $alignr${color 92CE0B}${font}${fs_free /media/hdc5} ${color} 
${fs_size /media/hdc5}:$alignr${fs_bar 6,40 /media/hdc5}${color}
Hdb5: $alignr${color 92CE0B}${font}${fs_free /media/hdb5} ${color} 
${fs_size /media/hdb5}:$alignr${fs_bar 6,40 /media/hdb5}${color}}${color}
$hr
Disk2

Kod: Markera allt

#avoid flicker

double_buffer yes



#own window to run simultanious 2 or more conkys

own_window yes

own_window_transparent yes

own_window_type normal

own_window_hints undecorate,sticky,skip_taskbar,skip_pager 



#borders

draw_borders no

border_margin 1



#shades

draw_shades no



#position

gap_x 550

gap_y 48

alignment bottom_left



#behaviour

update_interval 1



#colour

default_color 0FDE08

#default_shade_color cccccc

own_window_colour 222222



#font

use_xft yes

xftfont Vibrocentric:pixelsize=10



#to prevent window from moving

use_spacer no

minimum_size 100 0

maximum_size 100 0



TEXT
$hr ${color} 
$alignc Disks
$hr 
Hdb1: $alignr${color 92CE0B}${font}${fs_free /media/hdb1} ${color} 
${fs_size /media/hdb1}:$alignr${fs_bar 6,40 /media/hdb1}${color}
Sda1: $alignr${color 92CE0B}${font}${fs_free /media/sda1} ${color} 
${fs_size /media/sda1}:$alignr${fs_bar 6,40 /media/sda1}${color}
Sda5: $alignr${color 92CE0B}${font}${fs_free /media/sda5} ${color} 
${fs_size /media/sda5}:$alignr${fs_bar 6,40 /media/sda5}${color}}${color}
Hda1: $alignr${color 92CE0B}${font}${fs_free /media/hda1} ${color} 
${fs_size /media/hda1}:$alignr${fs_bar 6,40 /media/hda1}${color}}${color}
${diskiograph 15,00 92CE0B 92CE0B 750}
$hr
Networking

Kod: Markera allt

#avoid flicker

double_buffer yes



#own window to run simultanious 2 or more conkys

own_window yes

own_window_transparent yes

own_window_type normal

own_window_hints undecorate,sticky,skip_taskbar,skip_pager 



#borders

draw_borders no

border_margin 1



#shades

draw_shades no



#position

gap_x 660

gap_y 48

alignment bottom_left



#behaviour

update_interval 1



#colour

default_color 0FDE08

#default_shade_color cccccc

own_window_colour 222222



#font

use_xft yes

xftfont Vibrocentric:pixelsize=10



#to prevent window from moving

use_spacer no

minimum_size 130 0

maximum_width 130 0



TEXT
$hr ${color} 
$alignc Networking
$hr 
Hostname; $alignr${color 92CE0B}${font}${nodename}${color}
Ip: $alignr${color 92CE0B}${font}${addr eth0}${color}

Download: $alignr Upload:
${color 92CE0B}${downspeed eth0} k/s ${alignr} ${upspeed eth0} k/s${color}
${downspeedgraph eth0 15,63 92CE0B 92CE0B 2600} ${alignr}${upspeedgraph eth0 15,63 92CE0B 92CE0B 280}
Total Dw;$alignr${color 92CE0B} ${totaldown eth0} ${color} 
Total Up :$alignr ${color 92CE0B}${totalup eth0} ${color}

$hr ${color}
Calender

Kod: Markera allt

#avoid flicker

double_buffer yes



#own window to run simultanious 2 or more conkys

own_window yes

own_window_transparent yes

own_window_type normal

own_window_hints undecorate,sticky,skip_taskbar,skip_pager 



#borders

draw_borders no

border_margin 1



#shades

draw_shades no



#position

gap_x 800

gap_y 48

alignment bottom_left



#behaviour

update_interval 1



#colour

default_color 0FDE08

#default_shade_color cccccc

own_window_colour 222222



#font

use_xft yes

xftfont Vibrocentric:pixelsize=10



#to prevent window from moving

use_spacer no

minimum_size 155 0

maximum_width 155 0



TEXT
$hr ${color} 
$alignc Calender
$hr 
$alignc ${execi 360 cal | awk 'NR==1 {print $1 " " $2}' }

$alignc ${execi 360  cal | awk 'NR>1' | sed -e 's/   /    /g' -e 's/[^ ] /& /g' -e 's/..*/  & /' -e 's/ \('`date | awk '{print $3}'`'\) /\['`date | awk '{print $3}'`'\]/'}

$hr ${color}
Wheather/Xmms

Kod: Markera allt

#avoid flicker

double_buffer yes



#own window to run simultanious 2 or more conkys

own_window yes

own_window_transparent yes

own_window_type normal

own_window_hints undecorate,sticky,skip_taskbar,skip_pager 



#borders

draw_borders no

border_margin 1



#shades

draw_shades no



#position

gap_x 965

gap_y 48

alignment bottom_left



#behaviour

update_interval 1



#colour

default_color 0FDE08

#default_shade_color cccccc

own_window_colour 222222



#font

use_xft yes

xftfont Vibrocentric:pixelsize=10



#to prevent window from moving

use_spacer no

minimum_size 155 0

maximum_width 155 0



TEXT
$hr ${color} 
$alignc Weather
$hr 
${execi 300 /home/alex/.conky/weather.sh SWXX0060}
${color 92CE0B}Xmms: ${execi 5 cat /tmp/xmms-info | grep Status: | cut -d ":" -f2} ${hr 1}${color}
Artist: ${execi 5 xmmsctrl title | cut -d "-" -f1}
Title: ${execi 5 xmmsctrl title | cut -d "-" -f2}

$hr ${color}
MPD

Kod: Markera allt

#avoid flicker

double_buffer yes



#own window to run simultanious 2 or more conkys

own_window yes

own_window_transparent yes

own_window_type normal

own_window_hints undecorate,sticky,skip_taskbar,skip_pager 



#borders

draw_borders no

border_margin 1



#shades

draw_shades no



#position

gap_x 1130

gap_y 48

alignment bottom_left



#behaviour

update_interval 1



#colour

default_color 0FDE08

#default_shade_color cccccc

own_window_colour 222222



#font

use_xft yes

xftfont Vibrocentric:pixelsize=10



#to prevent window from moving

use_spacer no

minimum_size 140 0

maximum_width 140 0



TEXT
$hr ${color} 
$alignc MPD
$hr 
MPD:${color #92CE0B}Now ${mpd_status}${color} 
Artist:${alignc}${color #92CE0B} $mpd_artist${color} 
Title:${alignc}${color #92CE0B} $mpd_title${color} 
Album:${alignc}${color #92CE0B} $mpd_album${color}
File:${alignc}${color #92CE0B} $mpd_file${color}
Time:${color #92CE0B} $mpd_elapsed $alignr($mpd_length)${color}
${color #0FDE08} $mpd_bar ${color}
Bitrate:${color #92CE0B} $mpd_bitrate kbps${color} 
Random:${color #92CE0B} $mpd_random${color} 
Repeat:${color #92CE0B} $mpd_repeat${color} 
$hr ${color}
Väderscripten som behövs

wheather.xslt

Kod: Markera allt

<!-- 

 This XSLT is used to translate an XML response from the weather.com
 XML API. 

 You can format this file to your liking. Two things you may feel 
 like doing:

	1) Modify the layout of the fields or static text already defined
	2) Add other fields from the XML response file that aren't referenced in this
	   XSLT. You can grab a full list by just doing a: 
           wget "http://xoap.weather.com/weather/local/$LOCID?cc=*&unit=$UNITS" 
           (change $LOCID and $UNITS to suit your needs)
-->

<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0" > 
	<xsl:output method="text" disable-output-escaping="yes"/>
	<xsl:template match="weather">
		<xsl:apply-templates select="cc"/>
		<xsl:apply-templates select="dayf/day[@d='1']"/>
	</xsl:template>
 
	
	<xsl:template match="cc">

<xsl:text>  Temperature: </xsl:text><xsl:value-of select="tmp"/><xsl:value-of select="/weather/head/ut"/>
<xsl:if test="tmp != flik">
<xsl:text>
  Feels Like: </xsl:text><xsl:value-of select="flik"/><xsl:value-of select="/weather/head/ut"/>
</xsl:if>
<xsl:text>
  Conditions: </xsl:text><xsl:value-of select="t"/>
<xsl:text>
  Wind: </xsl:text>
<xsl:choose>
	<xsl:when test="wind/s = 'calm'"><xsl:text>0</xsl:text></xsl:when>
	<xsl:otherwise><xsl:value-of select="wind/s"/></xsl:otherwise>
</xsl:choose>
<xsl:value-of select="/weather/head/us"/> 
<xsl:choose>
	<xsl:when test="wind/s = 'calm'"><xsl:text>(0mph)</xsl:text></xsl:when>
	<xsl:otherwise><xsl:text> (</xsl:text><xsl:value-of select="round(wind/s * 0.6214)"/><xsl:text>mph)</xsl:text></xsl:otherwise>
</xsl:choose>
<xsl:text> (</xsl:text><xsl:value-of select="wind/t"/>
<xsl:text>)</xsl:text>
	</xsl:template>

	<xsl:template match="dayf/day[@d='1']">
<xsl:text>
  Tomorrow: </xsl:text><xsl:value-of select="low"/><xsl:value-of select="/weather/head/ut"/>
<xsl:text> to </xsl:text><xsl:value-of select="hi"/><xsl:value-of select="/weather/head/ut"/>
<xsl:text>, </xsl:text><xsl:value-of select="part[@p='d']/t"/>
<xsl:text>
  </xsl:text><xsl:value-of select="/weather/swa/a/t"/>
	</xsl:template>
</xsl:stylesheet>
weather.sh

Kod: Markera allt

#!/bin/sh

#
# Grab weather data from weather.com and format it according to the given XSLT
# Script written by boojit
# Modified by Hellf[i]re
# The orignal script and xslt can be downloaded from http://pondol.com/weather.tar.gz

# Usage:
# ${execi 1800 /home/alex/.conky/.weather.sh SWXX0060}
# Usage Example:
# ${execi 1800 /home/alex/.conky/weather.sh 03833}

# your Location ID: use http://xoap.weather.com/search/search?where=[yourcity] to find it 
# U.S. users can just use their zip code; doubt that works for anyone else though (YMMV)
LOCID=$1

# s=standard units, m=metric units
UNITS=m

# where this script and the XSLT lives
RUNDIR=/home/alex/.conky

# there's probably other stuff besides CURL that will work for this, but i haven't 
# tried any others. 
# you can get curl at http://curl.haxx.se/
CURLCMD=/usr/bin/curl

# get it at http://xmlsoft.org/XSLT/
XSLTCMD=/usr/bin/xsltproc

# you probably don't need to modify anything below this point....

# CURL url. Use cc=* for current forecast or dayf=10 to get a multi-day forecast
CURLURL="http://xoap.weather.com/weather/local/$LOCID?cc=*&unit=$UNITS&dayf=2"

# The XSLT to use when translating the response from weather.com
# You can modify this xslt to your liking 
XSLT=$RUNDIR/weather.xslt 

#filter (if you want to convert stuff to lower-case or upper case or something)
#FILTER="|gawk '{print(tolower(\$0));}'"


#####
eval "$CURLCMD \"$CURLURL\" 2>/dev/null| $XSLTCMD $XSLT - $FILTER"
Och för xmms.
xmms.sh

Kod: Markera allt

#!/bin/bash

#This script is free to modify and distribute.
#Use at your own risk.

#Requirement: xmms-infopipe

#User Settings here
maxcol=35
file=/tmp/xmms-info

#Grab needed information
pos=`cat $file | grep uSecPosition: | cut -d : -f2`
len=`cat $file | grep uSecTime: | cut -d : -f2`

#Count the length in characters of the title
size=`echo $title | wc -c`
#Calculate current position within that length
poscol=$(echo "$pos*$maxcol/$len" | bc)

#Printing
for (( i=0; i<$maxcol; i++ ))
do
  if [ $i -eq $poscol ]; then
    echo -n 'O'
  else
    echo -n '='
  fi
done
ojoj långt inlägg.

SV: Posta din .conkyrc

Postat: 09 feb 2008, 17:53
av Hund
Jag har nog den minsta konfigurationen någonsin nu. ;D

Bild

Kod: Markera allt

background no
font Sans:size=7
use_xft yes
xftalpha 0.9
update_interval 3.0
total_run_times 0
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 220 5
maximum_width 80
draw_shades yes
draw_outline no
draw_borders no
draw_graph_borders yes
default_color white
default_shade_color black
alignment top_right
gap_x 12
gap_y 35
no_buffers yes
cpu_avg_samples 2
override_utf8_locale no
uppercase yes

TEXT
${alignr}${uptime}
${alignr}${freq} MHz
${alignr}${cpu cpu1}%
${alignr}${cpu cpu2}%
${alignr}${mem}
${alignr}${swap}
${alignr}${acpitemp}C
${alignr}${execi 30 nvidia-settings -q [gpu:0]/GPUCoreTemp | grep '):' | awk '{print $4}' | sed 's/\.//'}C

SV: Posta din .conkyrc

Postat: 09 feb 2008, 17:57
av Ulsak
@qwertan: wtf! :o
@hund: wtf! ;D

SV: Posta din .conkyrc

Postat: 09 feb 2008, 18:00
av Hund
Ulsak skrev: @qwertan: wtf! :o
@hund: wtf! ;D
Jag hittade lite fräsiga widgets till Screenlets. Så jag har ordnat att när jag trycker på F9 så tonas skärmen ner och dessa widgets med all systeminfo dyker fram. :)

Ett steg närmare det rena skrivbordet!

SV: Posta din .conkyrc

Postat: 09 feb 2008, 18:17
av Ulsak
jäkligt cool, en minimal och jättestor conky. Jag tror nog att jag siktar in mig på din .rc fil, Hund!

SV: Posta din .conkyrc

Postat: 09 feb 2008, 21:06
av qwertan
JA måste ha för mycket fritid!  ::)

SV: Posta din .conkyrc

Postat: 10 feb 2008, 13:18
av pell
Jag har också en ganska minimal config. Snodde designen från ett screenshot på box-look. :)

Bild

Kod: Markera allt

background no
font Aerofoil:size=18
use_xft yes
xftalpha 0.9
update_interval 3.0
total_run_times 0
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 1640
width 1640
draw_shades yes ### SHADOW ###
draw_outline no
draw_borders no
draw_graph_borders yes
default_color white ### Text Color ###
default_shade_color black
default_outline_color green
alignment bottom_left
gap_x 20
gap_y 10
no_buffers yes
uppercase no
cpu_avg_samples 2
override_utf8_locale no
uppercase no

TEXT
${color white}${hr 1}
${color white}${tztime Canada/Pacific %A, %d %B} - ${time %k:%M}                                  $alignr${color white}cpu: ${color #CCCCCC}${cpu}%   ${color white}ram:${color white}$memperc%   ${color white}down: ${color white}${downspeed eth0}k/s   ${color white}up: ${color white}${upspeed eth0}k/s

SV: Posta din .conkyrc

Postat: 15 feb 2008, 23:13
av joda
tjena...

har två conky frågor...

hur startar man om conky utan att behöva starta om datorn efter man gjort nån ändring i conkyrc ?

var i själva texten bestäms positionen på skrivbordet ?

//jonatan

SV: Posta din .conkyrc

Postat: 15 feb 2008, 23:21
av Rasmus
joda skrev: hur startar man om conky utan att behöva starta om datorn efter man gjort nån ändring i conkyrc ?
[alt]+[f2] och skriv conky ;D

SV: Posta din .conkyrc

Postat: 15 feb 2008, 23:34
av joda
Rasmus skrev:
joda skrev: hur startar man om conky utan att behöva starta om datorn efter man gjort nån ändring i conkyrc ?
[alt]+[f2] och skriv conky ;D
tackar....

//jonatan

SV: Posta din .conkyrc

Postat: 15 feb 2008, 23:46
av Beakon
Rasmus skrev:
joda skrev: hur startar man om conky utan att behöva starta om datorn efter man gjort nån ändring i conkyrc ?
[alt]+[f2] och skriv conky ;D
Skulle rekommendera "killall conky" först så slipper man dubletter ovanpå varandra

SV: Posta din .conkyrc

Postat: 15 feb 2008, 23:52
av joda
Bejron skrev:
Rasmus skrev:
joda skrev: hur startar man om conky utan att behöva starta om datorn efter man gjort nån ändring i conkyrc ?
[alt]+[f2] och skriv conky ;D
Skulle rekommendera "killall conky" först så slipper man dubletter ovanpå varandra
skriver man det på samma ställe eller ?

SV: Posta din .conkyrc

Postat: 15 feb 2008, 23:55
av Rasmus
joda skrev:
Bejron skrev:
Rasmus skrev:
joda skrev: hur startar man om conky utan att behöva starta om datorn efter man gjort nån ändring i conkyrc ?
[alt]+[f2] och skriv conky ;D
Skulle rekommendera "killall conky" först så slipper man dubletter ovanpå varandra
skriver man det på samma ställe eller ?
Om du vill, annars kan du skriva det i en terminal. Man får välja själv :P

SV: Posta din .conkyrc

Postat: 15 feb 2008, 23:58
av joda
Rasmus skrev:
joda skrev:
Bejron skrev:
Rasmus skrev:
joda skrev: hur startar man om conky utan att behöva starta om datorn efter man gjort nån ändring i conkyrc ?
[alt]+[f2] och skriv conky ;D
Skulle rekommendera "killall conky" först så slipper man dubletter ovanpå varandra
skriver man det på samma ställe eller ?
Om du vill, annars kan du skriva det i en terminal. Man får välja själv :P
haha... oki... kul när man får välja lite själv...  ;)

SV: Posta din .conkyrc

Postat: 16 feb 2008, 00:46
av joda
hur ändrar jag positionen på vart den ska ligga på skrivbordet då ?
Alla tidsangivelser är UTC+02:00 UTC+2
Sida 6 av 12

Powered by phpBB® Forum Software © phpBB Limited

Swedish translation by phpBB Sweden © 2006-2015