Datorn kraschar när jag tittar på svtplay

[Kurdistan]

Eller kanske http://svtget.se/.

+1

Också bra förslag.

[AndersBrontosaurus]

Kan kernel panic bero på överhettningsproblem med din dator? Går CPUn upp i taket och det blir för varmt. Kommer burken för skydda sig själv antingen "stängas av sig själv" eller "kernel panic". Har du provat köra svtplay extern? Det kanske kan göra så du kan undkomma eländet du upplever nu.

Jag har också undrat om det är överhettning men när det väl hängt sig så finns inget att göra utom att stänga av såvitt jag förstår. Finns det nåt sätt att kolla loggar för temp i efterhand?

Dessutom har det börjat hänga sig även när jag inte streamar. Dagens låsning sade:

Här har du en möjlig lösning till ditt problem.
http://pirateplay.se/pirateplayer/get.html

Eller kanske http://svtget.se/.

Jag har provat dem men tycker inte de funkar så ofta längre. Har med god framgång kört huggpunkt i wine också men det funkar inte heller så ofta längre. http://planka.huggpunkt.org/h-vhs

[Kurdistan]

Kör du 32 eller 64 bitars version av Ubuntu 12.10?

Kopiera gärna dessa kommandon och återkom gärna med svaren.

Kod: Markera allt

lspci | grep VGA

Kod: Markera allt

cat /etc/X11/xorg.conf

Kod: Markera allt

sudo lshw -C video

Kopiera också innehållet från /var/log/
syslog
dmesg
apport.log

Kopiera också innehållet från /var/crash (om det finns någon)

[AndersBrontosaurus]

mja. Om sanningen ska fram så kör jag 64bitars mint cinnamon.
skrev ett inlägg om det tidigare idag angående ett annat problem som eventuellt sitter ihop med detta.

http://ubuntu-se.org/phpBB3/viewtopic.p ... 69#p461369

[Kurdistan]

Är lm-sensors intallerad. Det kan man enkelt göra via programcentralen. Sedan från terminalen med kommandot

Kod: Markera allt

sensors

kan man få information om temperaturen. Dock när det är kernel panic så lär inte detta hjälpa. Däremot kan du när det ej sker kernel panic då och då checka temperaturen. För jag misstänker att din burk lider av överhettningsproblem. Något hårdvara relaterad. Är det däremot mjukvara i form av drivrutiner och kärnan. Är lösningen enkel.

[AndersBrontosaurus]

01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS880 [Radeon HD 4200]

cat: /etc/X11/xorg.conf: No such file or directory

*-display
description: VGA compatible controller
product: RS880 [Radeon HD 4200]
vendor: Advanced Micro Devices [AMD] nee ATI
physical id: 5
bus info: pci@0000:01:05.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:18 memory:d0000000-dfffffff ioport:c000(size=256) memory:fe9f0000-fe9fffff memory:fe800000-fe8fffff

beträffande loggarna så var det flera miljoner tecken och max är 30000 så jag måste begränsa mig. Vad ska jag ta med?
apport och crash hittar jag inte.

sensors verkar installerad:
askinen ~ $ sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +24.5°C (high = +70.0°C)
(crit = +83.5°C, hyst = +81.5°C)

atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.14 V (min = +0.85 V, max = +1.60 V)
+3.3 Voltage: +3.34 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: +4.97 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: +12.28 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 1196 RPM (min = 600 RPM)
CHASSIS FAN Speed: 0 RPM (min = 600 RPM)
POWER FAN Speed: 0 RPM (min = 600 RPM)
CPU Temperature: +31.0°C (high = +60.0°C, crit = +95.0°C)
MB Temperature: +30.0°C (high = +45.0°C, crit = +75.0°C)

[AndersBrontosaurus]

dmesg:

Gömt innehåll: Visa!

[ 0.472791] pnp 00:0b: >[io 0x0b00-0x0b0f]
[ 0.472793] pnp 00:0b: >[io 0x0b20-0x0b3f]
[ 0.472794] pnp 00:0b: >[io 0x0900-0x090f]
[ 0.472795] pnp 00:0b: >[io 0x0910-0x091f]
[ 0.472797] pnp 00:0b: >[io 0xfe00-0xfefe]
[ 0.472799] pnp 00:0b: >[io 0x0060-0x005f disabled]
[ 0.472800] pnp 00:0b: >[io 0x0064-0x0063 disabled]
[ 0.472802] pnp 00:0b: >[mem 0xffb80000-0xffbfffff]
[ 0.472803] pnp 00:0b: >[mem 0xfec10000-0xfec1001f]
[ 0.472807] pnp 00:0b: >[mem 0xfed40000-0xfed44fff]
[ 0.472887] system 00:0b: >[io 0x04d0-0x04d1] has been reserved
[ 0.472889] system 00:0b: >[io 0x040b] has been reserved
[ 0.472891] system 00:0b: >[io 0x04d6] has been reserved
[ 0.472893] system 00:0b: >[io 0x0c00-0x0c01] has been reserved
[ 0.472894] system 00:0b: >[io 0x0c14] has been reserved
[ 0.472896] system 00:0b: >[io 0x0c50-0x0c51] has been reserved
[ 0.472898] system 00:0b: >[io 0x0c52] has been reserved
[ 0.472900] system 00:0b: >[io 0x0c6c] has been reserved
[ 0.472902] system 00:0b: >[io 0x0c6f] has been reserved
[ 0.472904] system 00:0b: >[io 0x0cd0-0x0cd1] has been reserved
[ 0.472906] system 00:0b: >[io 0x0cd2-0x0cd3] has been reserved
[ 0.472908] system 00:0b: >[io 0x0cd4-0x0cd5] has been reserved
[ 0.472909] system 00:0b: >[io 0x0cd6-0x0cd7] has been reserved
[ 0.472911] system 00:0b: >[io 0x0cd8-0x0cdf] has been reserved
[ 0.472913] system 00:0b: >[io 0x0b00-0x0b3f] has been reserved
[ 0.472915] system 00:0b: >[io 0x0800-0x089f] has been reserved
[ 0.472919] system 00:0b: >[io 0x0b00-0x0b0f] has been reserved
[ 0.472921] system 00:0b: >[io 0x0b20-0x0b3f] has been reserved
[ 0.472923] system 00:0b: >[io 0x0900-0x090f] has been reserved
[ 0.472925] system 00:0b: >[io 0x0910-0x091f] has been reserved
[ 0.472927] system 00:0b: >[io 0xfe00-0xfefe] has been reserved
[ 0.472929] system 00:0b: >[mem 0xffb80000-0xffbfffff] has been reserved
[ 0.472931] system 00:0b: >[mem 0xfec10000-0xfec1001f] has been reserved
[ 0.472933] system 00:0b: >[mem 0xfed40000-0xfed44fff] has been reserved
[ 0.472936] system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.473056] pnp 00:0c: >[io 0x0000-0xffffffffffffffff disabled]
[ 0.473058] pnp 00:0c: >[io 0x0230-0x023f]
[ 0.473059] pnp 00:0c: >[io 0x0290-0x029f]
[ 0.473061] pnp 00:0c: >[io 0x0300-0x030f]
[ 0.473062] pnp 00:0c: >[io 0x0a30-0x0a3f]
[ 0.473099] system 00:0c: >[io 0x0230-0x023f] has been reserved
[ 0.473101] system 00:0c: >[io 0x0290-0x029f] has been reserved
[ 0.473103] system 00:0c: >[io 0x0300-0x030f] has been reserved
[ 0.473105] system 00:0c: >[io 0x0a30-0x0a3f] has been reserved
[ 0.473107] system 00:0c: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.473133] pnp 00:0d: >[mem 0xe0000000-0xefffffff]
[ 0.473166] system 00:0d: >[mem 0xe0000000-0xefffffff] has been reserved
[ 0.473168] system 00:0d: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.473946] pnp 00:0e: >[mem 0x00000000-0x0009ffff]
[ 0.473948] pnp 00:0e: >[mem 0x000c0000-0x000cffff]
[ 0.473950] pnp 00:0e: >[mem 0x000e0000-0x000fffff]
[ 0.473951] pnp 00:0e: >[mem 0x00100000-0xcfffffff]
[ 0.473953] pnp 00:0e: >[mem 0xfec00000-0xffffffff]
[ 0.473994] system 00:0e: >[mem 0x00000000-0x0009ffff] could not be reserved
[ 0.473997] system 00:0e: >[mem 0x000c0000-0x000cffff] could not be reserved
[ 0.473999] system 00:0e: >[mem 0x000e0000-0x000fffff] could not be reserved
[ 0.474001] system 00:0e: >[mem 0x00100000-0xcfffffff] could not be reserved
[ 0.474003] system 00:0e: >[mem 0xfec00000-0xffffffff] could not be reserved
[ 0.474005] system 00:0e: >Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.474088] pnp: PnP ACPI: found 15 devices
[ 0.474090] ACPI: ACPI bus type pnp unregistered
[ 0.480397] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.480400] pci 0000:00:01.0: > bridge window [io 0xc000-0xcfff]
[ 0.480403] pci 0000:00:01.0: > bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.480406] pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.480409] pci 0000:00:0a.0: >PCI bridge to [bus 02-02]
[ 0.480412] pci 0000:00:0a.0: > bridge window [io 0xd000-0xdfff]
[ 0.480414] pci 0000:00:0a.0: > bridge window [mem 0xfea00000-0xfeafffff]
[ 0.480417] pci 0000:00:0a.0: > bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.480420] pci 0000:00:14.4: >PCI bridge to [bus 03-03]
[ 0.480423] pci 0000:00:14.4: > bridge window [io 0xe000-0xefff]
[ 0.480428] pci 0000:00:14.4: > bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.480454] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
[ 0.480456] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
[ 0.480457] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
[ 0.480459] pci_bus 0000:00: >resource 7 [mem 0x000d0000-0x000dffff]
[ 0.480461] pci_bus 0000:00: >resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.480463] pci_bus 0000:00: >resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.480465] pci_bus 0000:01: >resource 0 [io 0xc000-0xcfff]
[ 0.480466] pci_bus 0000:01: >resource 1 [mem 0xfe800000-0xfe9fffff]
[ 0.480468] pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.480470] pci_bus 0000:02: >resource 0 [io 0xd000-0xdfff]
[ 0.480472] pci_bus 0000:02: >resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.480474] pci_bus 0000:02: >resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.480476] pci_bus 0000:03: >resource 0 [io 0xe000-0xefff]
[ 0.480477] pci_bus 0000:03: >resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.480479] pci_bus 0000:03: >resource 4 [io 0x0000-0x0cf7]
[ 0.480481] pci_bus 0000:03: >resource 5 [io 0x0d00-0xffff]
[ 0.480483] pci_bus 0000:03: >resource 6 [mem 0x000a0000-0x000bffff]
[ 0.480484] pci_bus 0000:03: >resource 7 [mem 0x000d0000-0x000dffff]
[ 0.480486] pci_bus 0000:03: >resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.480488] pci_bus 0000:03: >resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.480517] NET: Registered protocol family 2
[ 0.480617] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.481336] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.483454] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.483721] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.483722] TCP: reno registered
[ 0.483730] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.483756] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.483836] NET: Registered protocol family 1
[ 0.483846] pci 0000:00:01.0: >MSI quirk detected; subordinate MSI disabled
[ 0.484079] pci 0000:01:05.0: >Boot video device
[ 0.484091] PCI: CLS 64 bytes, default 64
[ 0.484633] PCI-DMA: Disabling AGP.
[ 0.484718] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.484719] PCI-DMA: using GART IOMMU.
[ 0.484721] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.488141] LVT offset 1 assigned for vector 0x400
[ 0.488150] IBS: LVT offset 1 assigned
[ 0.488176] perf: AMD IBS detected (0x0000001f)
[ 0.488314] audit: initializing netlink socket (disabled)
[ 0.488328] type=2000 audit(1363524593.376:1): initialized
[ 0.508334] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.509864] VFS: Disk quotas dquot_6.5.2
[ 0.509902] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.510348] fuse init (API version 7.19)
[ 0.510416] msgmni has been set to 7397
[ 0.510850] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.510882] io scheduler noop registered
[ 0.510883] io scheduler deadline registered (default)
[ 0.510907] io scheduler cfq registered
[ 0.511034] pcieport 0000:00:0a.0: >irq 40 for MSI/MSI-X
[ 0.511096] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.511112] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.511211] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.511214] ACPI: Power Button [PWRB]
[ 0.511246] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.511248] ACPI: Power Button [PWRF]
[ 0.541989] GHES: HEST is not enabled!
[ 0.542058] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.562458] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.583876] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.584099] Linux agpgart interface v0.103
[ 0.585243] brd: module loaded
[ 0.585882] loop: module loaded
[ 0.585963] ahci 0000:00:11.0: >version 3.0
[ 0.586086] ahci 0000:00:11.0: >AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.586089] ahci 0000:00:11.0: >flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 0.586530] scsi0 : ahci
[ 0.586596] scsi1 : ahci
[ 0.586646] scsi2 : ahci
[ 0.586698] scsi3 : ahci
[ 0.586773] ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22
[ 0.586776] ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22
[ 0.586778] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22
[ 0.586781] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22
[ 0.586924] pata_acpi 0000:00:14.1: >setting latency timer to 64
[ 0.587148] Fixed MDIO Bus: probed
[ 0.587181] tun: Universal TUN/TAP device driver, 1.6
[ 0.587182] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.587222] PPP generic driver version 2.4.2
[ 0.587270] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.587303] ehci_hcd 0000:00:12.2: >EHCI Host Controller
[ 0.587309] ehci_hcd 0000:00:12.2: >new USB bus registered, assigned bus number 1
[ 0.587317] ehci_hcd 0000:00:12.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.587340] ehci_hcd 0000:00:12.2: >debug port 1
[ 0.587360] ehci_hcd 0000:00:12.2: >irq 17, io mem 0xfe7ff800
[ 0.597339] ehci_hcd 0000:00:12.2: >USB 2.0 started, EHCI 1.00
[ 0.597364] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[ 0.597367] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.597368] usb usb1: >Product: EHCI Host Controller
[ 0.597370] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[ 0.597372] usb usb1: >SerialNumber: 0000:00:12.2
[ 0.597481] hub 1-0:1.0: >USB hub found
[ 0.597485] hub 1-0:1.0: >6 ports detected
[ 0.597579] ehci_hcd 0000:00:13.2: >EHCI Host Controller
[ 0.597584] ehci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 2
[ 0.597590] ehci_hcd 0000:00:13.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.597609] ehci_hcd 0000:00:13.2: >debug port 1
[ 0.597628] ehci_hcd 0000:00:13.2: >irq 19, io mem 0xfe7ff400
[ 0.609319] ehci_hcd 0000:00:13.2: >USB 2.0 started, EHCI 1.00
[ 0.609335] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
[ 0.609337] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.609338] usb usb2: >Product: EHCI Host Controller
[ 0.609340] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[ 0.609341] usb usb2: >SerialNumber: 0000:00:13.2
[ 0.609431] hub 2-0:1.0: >USB hub found
[ 0.609434] hub 2-0:1.0: >6 ports detected
[ 0.609516] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.609553] ohci_hcd 0000:00:12.0: >OHCI Host Controller
[ 0.609558] ohci_hcd 0000:00:12.0: >new USB bus registered, assigned bus number 3
[ 0.609581] ohci_hcd 0000:00:12.0: >irq 16, io mem 0xfe7fe000
[ 0.669198] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.669201] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.669203] usb usb3: >Product: OHCI Host Controller
[ 0.669204] usb usb3: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
[ 0.669206] usb usb3: >SerialNumber: 0000:00:12.0
[ 0.669297] hub 3-0:1.0: >USB hub found
[ 0.669303] hub 3-0:1.0: >3 ports detected
[ 0.669388] ohci_hcd 0000:00:12.1: >OHCI Host Controller
[ 0.669392] ohci_hcd 0000:00:12.1: >new USB bus registered, assigned bus number 4
[ 0.669406] ohci_hcd 0000:00:12.1: >irq 16, io mem 0xfe7fd000
[ 0.729084] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.729086] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.729088] usb usb4: >Product: OHCI Host Controller
[ 0.729090] usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
[ 0.729091] usb usb4: >SerialNumber: 0000:00:12.1
[ 0.729181] hub 4-0:1.0: >USB hub found
[ 0.729186] hub 4-0:1.0: >3 ports detected
[ 0.729269] ohci_hcd 0000:00:13.0: >OHCI Host Controller
[ 0.729273] ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 5
[ 0.729296] ohci_hcd 0000:00:13.0: >irq 18, io mem 0xfe7fc000
[ 0.788967] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.788970] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.788972] usb usb5: >Product: OHCI Host Controller
[ 0.788973] usb usb5: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
[ 0.788975] usb usb5: >SerialNumber: 0000:00:13.0
[ 0.789066] hub 5-0:1.0: >USB hub found
[ 0.789071] hub 5-0:1.0: >3 ports detected
[ 0.789153] ohci_hcd 0000:00:13.1: >OHCI Host Controller
[ 0.789158] ohci_hcd 0000:00:13.1: >new USB bus registered, assigned bus number 6
[ 0.789173] ohci_hcd 0000:00:13.1: >irq 18, io mem 0xfe7fb000
[ 0.848887] usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.848889] usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.848891] usb usb6: >Product: OHCI Host Controller
[ 0.848893] usb usb6: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
[ 0.848894] usb usb6: >SerialNumber: 0000:00:13.1
[ 0.848987] hub 6-0:1.0: >USB hub found
[ 0.848993] hub 6-0:1.0: >3 ports detected
[ 0.849078] ohci_hcd 0000:00:14.5: >OHCI Host Controller
[ 0.849082] ohci_hcd 0000:00:14.5: >new USB bus registered, assigned bus number 7
[ 0.849097] ohci_hcd 0000:00:14.5: >irq 18, io mem 0xfe7fa000
[ 0.904825] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.904876] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.904911] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.908766] usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.908768] usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.908770] usb usb7: >Product: OHCI Host Controller
[ 0.908772] usb usb7: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
[ 0.908773] usb usb7: >SerialNumber: 0000:00:14.5
[ 0.908864] hub 7-0:1.0: >USB hub found
[ 0.908869] hub 7-0:1.0: >2 ports detected
[ 0.908937] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.908994] usbcore: registered new interface driver libusual
[ 0.909025] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.909027] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.909145] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.909226] mousedev: PS/2 mouse device common for all mice
[ 0.909332] rtc_cmos 00:03: >RTC can wake from S4
[ 0.909432] rtc_cmos 00:03: >rtc core: registered rtc_cmos as rtc0
[ 0.909455] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.909511] device-mapper: uevent: version 1.0.3
[ 0.909559] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.909565] cpuidle: using governor ladder
[ 0.909566] cpuidle: using governor menu
[ 0.909567] EFI Variables Facility v0.08 2004-May-17
[ 0.909752] ashmem: initialized
[ 0.909841] TCP: cubic registered
[ 0.909918] NET: Registered protocol family 10
[ 0.910077] NET: Registered protocol family 17
[ 0.910087] Key type dns_resolver registered
[ 0.910184] PM: Hibernation image not present or could not be loaded.
[ 0.910191] registered taskstats version 1
[ 0.912097] Key type trusted registered
[ 0.913776] Key type encrypted registered
[ 0.915542] Magic number: 5:318:835
[ 0.915625] rtc_cmos 00:03: >setting system clock to 2013-03-17 12:49:54 UTC (1363524594)
[ 0.915664] powernow-k8: Found 1 AMD Phenom(tm) II X4 905e Processor (4 cpu cores) (version 2.20.00)
[ 0.915690] powernow-k8: 0 : pstate 0 (2500 MHz)
[ 0.915692] powernow-k8: 1 : pstate 1 (1900 MHz)
[ 0.915693] powernow-k8: 2 : pstate 2 (1400 MHz)
[ 0.915694] powernow-k8: 3 : pstate 3 (800 MHz)
[ 0.916208] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.916209] EDD information not available.
[ 0.927365] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.076436] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.077241] ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 1.077244] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.078106] ata2.00: configured for UDMA/133
[ 1.078254] scsi 1:0:0:0: >Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
[ 1.078369] sd 1:0:0:0: >[sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.078382] sd 1:0:0:0: >Attached scsi generic sg0 type 0
[ 1.078453] sd 1:0:0:0: >[sda] Write Protect is off
[ 1.078456] sd 1:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[ 1.078493] sd 1:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.116351] usb 3-1: >new low-speed USB device number 2 using ohci_hcd
[ 1.136825] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.137268] sd 1:0:0:0: >[sda] Attached SCSI disk
[ 1.138410] Freeing unused kernel memory: 928k freed
[ 1.138603] Write protecting the kernel read-only data: 12288k
[ 1.142827] Freeing unused kernel memory: 1472k freed
[ 1.146232] Freeing unused kernel memory: 1124k freed
[ 1.160865] udevd[107]: starting version 175
[ 1.176499] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.176593] r8169 0000:02:00.0: >irq 41 for MSI/MSI-X
[ 1.176741] r8169 0000:02:00.0: >eth0: RTL8168d/8111d at 0xffffc9000060e000, 00:26:18:f0:4b:c8, XID 083000c0 IRQ 41
[ 1.176744] r8169 0000:02:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.189634] scsi4 : pata_atiixp
[ 1.189705] scsi5 : pata_atiixp
[ 1.190204] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.190206] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.292053] usb 3-1: >New USB device found, idVendor=056e, idProduct=001d
[ 1.292057] usb 3-1: >New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1.292060] usb 3-1: >Product: Saiph 1800 Gaming Mouse
[ 1.292062] usb 3-1: >Manufacturer: Mionix Technology Ltd
[ 1.360349] ata5.00: ATAPI: Optiarc DVD RW AD-5200A, 1.01, max UDMA/66
[ 1.376257] ata5.00: configured for UDMA/66
[ 1.378425] scsi 4:0:0:0: >CD-ROM Optiarc DVD RW AD-5200A 1.01 PQ: 0 ANSI: 5
[ 1.380803] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.380806] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.380921] sr 4:0:0:0: >Attached scsi CD-ROM sr0
[ 1.381056] sr 4:0:0:0: >Attached scsi generic sg1 type 5
[ 1.390910] usbcore: registered new interface driver usbhid
[ 1.390912] usbhid: USB HID core driver
[ 1.394898] input: Mionix Technology Ltd Saiph 1800 Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input3
[ 1.395034] hid-generic 0003:056E:001D.0001: >input,hiddev0,hidraw0: USB HID v1.11 Mouse [Mionix Technology Ltd Saiph 1800 Gaming Mouse] on usb-0000:00:12.0-1/input0
[ 1.443776] firewire_ohci 0000:03:08.0: >added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.483649] Refined TSC clocksource calibration: 2511.012 MHz.
[ 1.483659] Switching to clocksource tsc
[ 1.942813] firewire_core 0000:03:08.0: created device fw0: GUID 1e00000000008c00, S400
[ 2.201850] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[ 2.201852] EXT4-fs (sda3): write access will be enabled during recovery
[ 3.577677] EXT4-fs (sda3): recovery complete
[ 3.588783] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 15.034811] Adding 1951892k swap on /dev/sda2. Priority:-1 extents:1 across:1951892k
[ 15.038961] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.067094] udevd[358]: starting version 175
[ 15.098714] lp: driver loaded but no devices found
[ 15.101332] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
[ 15.101338] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 2 (20120320/utaddress-251)
[ 15.101342] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 3 (20120320/utaddress-251)
[ 15.101346] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.101692] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
[ 15.101786] sp5100_tco: mmio address 0xfec000f0 already in use
[ 15.102866] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.113979] [drm] Initialized drm 1.1.0 20060810
[ 15.125571] wmi: Mapper loaded
[ 15.138091] MCE: In-kernel MCE decoding enabled.
[ 15.144093] EDAC MC: Ver: 2.1.0
[ 15.152992] AMD64 EDAC driver v3.4.0
[ 15.153038] EDAC amd64: DRAM ECC disabled.
[ 15.153048] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 15.153048] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 15.153048] (Note that use of the override may cause unknown side effects.)
[ 15.176617] parport_pc 00:06: >reported by Plug and Play ACPI
[ 15.176670] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 15.179646] microcode: CPU0: patch_level=0x01000086
[ 15.179998] [drm] radeon defaulting to kernel modesetting.
[ 15.180001] [drm] radeon kernel modesetting enabled.
[ 15.180227] [drm] initializing kernel modesetting (RS880 0x1002:0x9710 0x1043:0x83A2).
[ 15.180247] [drm] register mmio base: 0xFE9F0000
[ 15.180248] [drm] register mmio size: 65536
[ 15.180896] ATOM BIOS: 113
[ 15.180915] radeon 0000:01:05.0: >VRAM: 368M 0x00000000C0000000 - 0x00000000D6FFFFFF (368M used)
[ 15.180918] radeon 0000:01:05.0: >GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 15.185424] [drm] Detected VRAM RAM=368M, BAR=256M
[ 15.185428] [drm] RAM width 32bits DDR
[ 15.187109] [TTM] Zone kernel: Available graphics memory: 1895592 kiB
[ 15.187111] [TTM] Initializing pool allocator
[ 15.187117] [TTM] Initializing DMA pool allocator
[ 15.187136] [drm] radeon: 368M of VRAM memory ready
[ 15.187137] [drm] radeon: 512M of GTT memory ready.
[ 15.187150] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 15.187151] [drm] Driver supports precise vblank timestamp query.
[ 15.187170] [drm] radeon: irq initialized.
[ 15.187173] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 15.187810] [drm] Loading RS780 Microcode
[ 15.254525] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 15.254598] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 15.254680] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 15.254734] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 15.254786] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 15.254846] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 15.254899] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 15.254955] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 15.266953] ppdev: user-space parallel port driver
[ 15.276586] lp0: using parport0 (interrupt-driven).
[ 15.305633] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 15.305644] microcode: CPU1: patch_level=0x01000086
[ 15.306934] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 15.306943] microcode: CPU2: patch_level=0x01000086
[ 15.308383] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 15.308390] microcode: CPU3: patch_level=0x01000086
[ 15.310082] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 15.310123] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 15.312084] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 15.312173] radeon 0000:01:05.0: >WB enabled
[ 15.312176] radeon 0000:01:05.0: >fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800cc42bc00
[ 15.312419] radeon 0000:01:05.0: >setting latency timer to 64
[ 15.313455] kvm: disabled by bios
[ 15.344023] [drm] ring test on 0 succeeded in 1 usecs
[ 15.344118] [drm] ib test on ring 0 succeeded in 0 usecs
[ 15.344321] [drm] Radeon Display Connectors
[ 15.344322] [drm] Connector 0:
[ 15.344323] [drm] VGA-1
[ 15.344325] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 15.344326] [drm] Encoders:
[ 15.344327] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 15.344328] [drm] Connector 1:
[ 15.344329] [drm] DVI-D-1
[ 15.344330] [drm] HPD1
[ 15.344331] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 15.344332] [drm] Encoders:
[ 15.344333] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
[ 15.344351] [drm] radeon: power management initialized
[ 15.385620] [drm] fb mappable at 0xD0142000
[ 15.385621] [drm] vram apper at 0xD0000000
[ 15.385622] [drm] size 5242880
[ 15.385623] [drm] fb depth is 24
[ 15.385623] [drm] pitch is 5120
[ 15.385689] fbcon: radeondrmfb (fb0) is primary device
[ 15.385791] Console: switching to colour frame buffer device 160x64
[ 15.385817] fb0: radeondrmfb frame buffer device
[ 15.385820] drm: registered panic notifier
[ 15.385825] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:05.0 on minor 0
[ 15.386526] snd_hda_intel 0000:01:05.1: >setting latency timer to 64
[ 15.386789] kvm: disabled by bios
[ 15.394556] kvm: disabled by bios
[ 15.487496] kvm: disabled by bios
[ 18.101930] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 19.377679] init: failsafe main process (894) killed by TERM signal
[ 19.462052] Bluetooth: Core ver 2.16
[ 19.462074] NET: Registered protocol family 31
[ 19.462075] Bluetooth: HCI device and connection manager initialized
[ 19.462242] Bluetooth: HCI socket layer initialized
[ 19.462244] Bluetooth: L2CAP socket layer initialized
[ 19.462247] Bluetooth: SCO socket layer initialized
[ 19.475198] Bluetooth: RFCOMM TTY layer initialized
[ 19.475204] Bluetooth: RFCOMM socket layer initialized
[ 19.475205] Bluetooth: RFCOMM ver 1.11
[ 19.480395] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.480398] Bluetooth: BNEP filters: protocol multicast
[ 19.555207] r8169 0000:02:00.0: >eth0: link down
[ 19.555216] r8169 0000:02:00.0: >eth0: link down
[ 19.555641] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.555868] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.197716] vboxdrv: Found 4 processor cores.
[ 20.197890] vboxdrv: fAsync=0 offMin=0x3ac offMax=0x1259
[ 20.197969] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 20.197970] vboxdrv: Successfully loaded version 4.2.8 (interface 0x001a0004).
[ 20.404371] vboxpci: IOMMU not found (not registered)
[ 20.827655] init: plymouth-stop pre-start process (1622) terminated with status 1
[ 21.187004] r8169 0000:02:00.0: >eth0: link up
[ 21.187426] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[AndersBrontosaurus]

Hur ska jag redovisa syslog?
Den är för stor både för att klistra in och för att bifoga i sin helhet som fil.

MVH
Anders

[Kurdistan]

Kod: Markera allt

fglrxinfo

Gärna även detta. (Tror dock ej du har fglrxinfo kommer ge något svar).

[AndersBrontosaurus]

Sant.
Borde jag installera?

fglrxinfo: command not found

[Kurdistan]

Kod: Markera allt

sudo add-apt-repository ppa:makson96/fglrx

Kod: Markera allt

sudo apt-get update

Kod: Markera allt

sudo apt-get upgrade

Kod: Markera allt

sudo apt-get install fglrx-legacy

Efter dessa kommandon och när dessa är klar. Starta om datorn och säg om det har blivit någon skillnad för dig.

[AndersBrontosaurus]

vad händer? Byter jag grafikrutiner nu?

MVH
Anders

[Kurdistan]

vad händer? Byter jag grafikrutiner nu?

MVH
Anders

Yes du har ju HD 4000 serien av grafikkort. Genom de rader jag skrivit kommer du kunna köra AMD/ATI (fglrx) dvs stängda drivrutiner. Det kanske skapar större stabilitet för dig. Värt ett försök. Kan knappast bli sämre än kernel panic . Vi får se om du kanske också behöver generera xorg.conf fil.

[AndersBrontosaurus]

Tack för hjälpen!
Jag tror att felet kan sitta ihop med den här tråden så jag väntar lite med grafikrutinerna.
Vad tror du?

MVH
Anders

[Kurdistan]

Tack för hjälpen!
Jag tror att felet kan sitta ihop med den här tråden så jag väntar lite med grafikrutinerna.
Vad tror du?

MVH
Anders

Låter vettigt mannen. Lycka till!