Huwei modem upptäcks inte efter inloggning

[beryllium]

har jättelänge haft problem med nätverksanslutningen. Kör just nu mobilt internet från 3, huwei modem (minns inte modellen) på Xubuntu 11.04. För att få internet att funka måste man sätta i stickan efter inloggning annars upptäcks inte modemet. Har testat att installera om USB-modeswitch utan någon förbättring. Däremot kan den ibland under Gnome upptäcka stickan som den ska, men bara ibland. Några lösningar?

kristian@kristian-desktop:~/Skrivbord$ lspci
00:00.0 Host bridge: nVidia Corporation nForce2 IGP2 (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
01:00.0 VGA compatible controller: nVidia Corporation NV31 [GeForce FX 5600] (rev a1)
kristian@kristian-desktop:~/Skrivbord$

[ubot]

Kör lsusb så vi ser vilken modell du har?

Kod: Markera allt

lsusb

Posta raden som innehåller 3G-modemet. Det här låter som något som beror på någon modul.

[beryllium]

kristian@kristian-desktop:~$ lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
Bus 001 Device 005: ID 09da:000a A4 Tech Co., Ltd Port Mouse
Bus 001 Device 004: ID 03f0:8911 Hewlett-Packard
Bus 001 Device 003: ID 1307:0165 Transcend Information, Inc. 2GB/4GB Flash Drive
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
kristian@kristian-desktop:~$

[ubot]

Direkt efter att datorn har startat och du har kontrollerat att modemet inte fungerar, kör då det här kommandot och posta resultatet här m.h.a. http://pastebin.ubuntu.com

Kod: Markera allt

dmesg | tail -100

[P.Forsberg]

En möjlighet till. Kör i terminalen

Kod: Markera allt

sudo modprobe usbserial vendor=0x12d1 product=0x1003

Kolla sedan om den finns med under nätverksanslutningar.
Funkar det ?

[beryllium]

Kod: Markera allt

kristian@kristian-desktop:~$ dmesg tail-100
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-11-generic (buildd@roseapple) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #49-Ubuntu SMP Mon Aug 29 20:47:58 UTC 2011 (Ubuntu 2.6.38-11.49-generic 2.6.38.8)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] DMI 2.2 present.
[    0.000000] DMI:    /nVidia-nForce2, BIOS 6.00 PG 10/07/2003
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 0E0000000 mask FFC000000 write-combining
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] init_memory_mapping: 0000000000000000-000000001fff0000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 001fc00000 page 2M
[    0.000000]  001fc00000 - 001fff0000 page 4k
[    0.000000] kernel direct mapping tables up to 1fff0000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 1e81b000 - 1f45b000
[    0.000000] ACPI: RSDP 000f71b0 00014 (v00 Nvidia)
[    0.000000] ACPI: RSDT 1fff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 1fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 1fff30c0 04B46 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 1fff0000 00040
[    0.000000] ACPI: APIC 1fff7c40 0006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1fff0000
[    0.000000]   low ram: 0 - 1fff0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001fff0
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x000000a0
[    0.000000]     0: 0x00000100 -> 0x0001fff0
[    0.000000] On node 0 totalpages: 130944
[    0.000000] free_area_init_node: node 0, pgdat c1784180, node_mem_map dfbef200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3952 pages, LIFO batch:0
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 125968 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @de400000 s28800 r0 d24448 u4194304
[    0.000000] pcpu-alloc: s28800 r0 d24448 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129920
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-generic root=UUID=cb8575d9-dcf6-4ccf-a123-37e1202b9050 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2620800 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 494736k/524224k available (5191k kernel code, 29040k reserved, 2537k data, 700k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xe07f0000 - 0xff7fe000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
[    0.000000]       .init : 0xc178d000 - 0xc183c000   ( 700 kB)
[    0.000000]       .data : 0xc1511e81 - 0xc178c500   (2537 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1511e81   (5191 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=de006000 soft=de008000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2088.075 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4176.15 BogoMIPS (lpj=8352300)
[    0.004011] pid_max: default: 32768 minimum: 301
[    0.004050] Security Framework initialized
[    0.004085] AppArmor: AppArmor initialized
[    0.004088] Yama: becoming mindful.
[    0.004175] Mount-cache hash table entries: 512
[    0.004375] Initializing cgroup subsys ns
[    0.004380] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.004385] Initializing cgroup subsys cpuacct
[    0.004392] Initializing cgroup subsys memory
[    0.004406] Initializing cgroup subsys devices
[    0.004411] Initializing cgroup subsys freezer
[    0.004414] Initializing cgroup subsys net_cls
[    0.004418] Initializing cgroup subsys blkio
[    0.004467] mce: CPU supports 4 MCE banks
[    0.004960] SMP alternatives: switching to UP code
[    0.014497] Freeing SMP alternatives: 20k freed
[    0.014525] ACPI: Core revision 20110112
[    0.020055] ftrace: allocating 23653 entries in 47 pages
[    0.024149] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.024539] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.066528] CPU0: AMD Athlon(tm) XP 2800+ stepping 00
[    0.068003] Performance Events: AMD PMU driver.
[    0.068003] ... version:                0
[    0.068003] ... bit width:              48
[    0.068003] ... generic registers:      4
[    0.068003] ... value mask:             0000ffffffffffff
[    0.068003] ... max period:             00007fffffffffff
[    0.068003] ... fixed-purpose events:   0
[    0.068003] ... event mask:             000000000000000f
[    0.068003] Brought up 1 CPUs
[    0.068003] Total of 1 processors activated (4176.15 BogoMIPS).
[    0.068003] devtmpfs: initialized
[    0.068003] print_constraints: dummy: 
[    0.068003] Time: 22:43:30  Date: 09/02/11
[    0.068003] NET: Registered protocol family 16
[    0.068003] EISA bus registered
[    0.068003] ACPI: bus type pci registered
[    0.068612] PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=2
[    0.068615] PCI: Using configuration type 1 for base access
[    0.068632] mtrr: your CPUs had inconsistent fixed MTRR settings
[    0.068634] mtrr: probably your BIOS does not setup all CPUs.
[    0.068636] mtrr: corrected configuration.
[    0.069940] bio: create slab <bio-0> at 0
[    0.071220] ACPI: EC: Look up EC in DSDT
[    0.074954] ACPI: Interpreter enabled
[    0.074959] ACPI: (supports S0 S1 S4 S5)
[    0.074982] ACPI: Using IOAPIC for interrupt routing
[    0.081315] ACPI: No dock devices found.
[    0.081318] HEST: Table not found.
[    0.081323] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.081393] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.081534] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.081539] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.081543] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.081546] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.081550] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[    0.081567] pci 0000:00:00.0: [10de:01e0] type 0 class 0x000600
[    0.081577] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe3ffffff pref]
[    0.081618] pci 0000:00:00.1: [10de:01eb] type 0 class 0x000500
[    0.081655] pci 0000:00:00.2: [10de:01ee] type 0 class 0x000500
[    0.081692] pci 0000:00:00.3: [10de:01ed] type 0 class 0x000500
[    0.081729] pci 0000:00:00.4: [10de:01ec] type 0 class 0x000500
[    0.081766] pci 0000:00:00.5: [10de:01ef] type 0 class 0x000500
[    0.081808] pci 0000:00:01.0: [10de:0060] type 0 class 0x000601
[    0.081888] pci 0000:00:01.1: [10de:0064] type 0 class 0x000c05
[    0.081903] pci 0000:00:01.1: reg 10: [io  0xe400-0xe41f]
[    0.081957] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.081962] pci 0000:00:01.1: PME# disabled
[    0.081984] pci 0000:00:02.0: [10de:0067] type 0 class 0x000c03
[    0.081999] pci 0000:00:02.0: reg 10: [mem 0xe6002000-0xe6002fff]
[    0.082052] pci 0000:00:02.0: supports D1 D2
[    0.082055] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.082059] pci 0000:00:02.0: PME# disabled
[    0.082076] pci 0000:00:02.1: [10de:0067] type 0 class 0x000c03
[    0.082091] pci 0000:00:02.1: reg 10: [mem 0xe6003000-0xe6003fff]
[    0.082144] pci 0000:00:02.1: supports D1 D2

[beryllium]

resten utav svaret

Kod: Markera allt

[    0.082151] pci 0000:00:02.1: PME# disabled
[    0.082170] pci 0000:00:02.2: [10de:0068] type 0 class 0x000c03
[    0.082187] pci 0000:00:02.2: reg 10: [mem 0xe6004000-0xe60040ff]
[    0.082246] pci 0000:00:02.2: supports D1 D2
[    0.082249] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.082254] pci 0000:00:02.2: PME# disabled
[    0.082278] pci 0000:00:04.0: [10de:0066] type 0 class 0x000200
[    0.082293] pci 0000:00:04.0: reg 10: [mem 0xe6001000-0xe6001fff]
[    0.082302] pci 0000:00:04.0: reg 14: [io  0xe000-0xe007]
[    0.082349] pci 0000:00:04.0: supports D1 D2
[    0.082352] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.082356] pci 0000:00:04.0: PME# disabled
[    0.082376] pci 0000:00:06.0: [10de:006a] type 0 class 0x000401
[    0.082390] pci 0000:00:06.0: reg 10: [io  0xd000-0xd0ff]
[    0.082400] pci 0000:00:06.0: reg 14: [io  0xd400-0xd47f]
[    0.082409] pci 0000:00:06.0: reg 18: [mem 0xe6005000-0xe6005fff]
[    0.082450] pci 0000:00:06.0: supports D1 D2
[    0.082465] pci 0000:00:08.0: [10de:006c] type 1 class 0x000604
[    0.082505] pci 0000:00:09.0: [10de:0065] type 0 class 0x000101
[    0.082544] pci 0000:00:09.0: reg 20: [io  0xf000-0xf00f]
[    0.082602] pci 0000:00:1e.0: [10de:01e8] type 1 class 0x000604
[    0.082682] pci 0000:00:08.0: PCI bridge to [bus 02-02]
[    0.082688] pci 0000:00:08.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.082693] pci 0000:00:08.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.082698] pci 0000:00:08.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.082722] pci 0000:01:00.0: [10de:0312] type 0 class 0x000300
[    0.082738] pci 0000:01:00.0: reg 10: [mem 0xe4000000-0xe4ffffff]
[    0.082748] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff pref]
[    0.082782] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.082836] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[    0.082840] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.082844] pci 0000:00:1e.0:   bridge window [mem 0xe4000000-0xe5ffffff]
[    0.082849] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.082860] pci_bus 0000:00: on NUMA node 0
[    0.082864] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.082956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.083099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[    0.107524] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.107585] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.107645] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.107705] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.107762] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.107822] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.107880] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.107948] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.108016] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.108082] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.108141] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.108201] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.108267] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.108330] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.108390] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.108448] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.108510] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[    0.108559] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[    0.108607] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[    0.108656] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[    0.108703] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[    0.108782] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[    0.108860] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[    0.108937] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[    0.109014] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[    0.109091] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[    0.109175] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[    0.109226] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
[    0.109302] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[    0.109379] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[    0.109456] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[    0.109534] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[    0.109690] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.109693] vgaarb: loaded
[    0.109995] SCSI subsystem initialized
[    0.110097] libata version 3.00 loaded.
[    0.110170] usbcore: registered new interface driver usbfs
[    0.110186] usbcore: registered new interface driver hub
[    0.110227] usbcore: registered new device driver usb
[    0.110381] wmi: Mapper loaded
[    0.110384] PCI: Using ACPI for IRQ routing
[    0.110391] PCI: pci_cache_line_size set to 32 bytes
[    0.110443] reserve RAM buffer: 000000001fff0000 - 000000001fffffff 
[    0.110590] NetLabel: Initializing
[    0.110593] NetLabel:  domain hash size = 128
[    0.110595] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.110613] NetLabel:  unlabeled traffic allowed by default
[    0.121043] AppArmor: AppArmor Filesystem Enabled
[    0.121102] pnp: PnP ACPI init
[    0.121130] ACPI: bus type pnp registered
[    0.121409] pnp 00:00: [io  0x4000-0x407f]
[    0.121412] pnp 00:00: [io  0x4080-0x40ff]
[    0.121415] pnp 00:00: [io  0x4400-0x447f]
[    0.121418] pnp 00:00: [io  0x4480-0x44ff]
[    0.121420] pnp 00:00: [io  0x4200-0x427f]
[    0.121423] pnp 00:00: [io  0x4280-0x42ff]
[    0.121497] system 00:00: [io  0x4000-0x407f] has been reserved
[    0.121501] system 00:00: [io  0x4080-0x40ff] has been reserved
[    0.121504] system 00:00: [io  0x4400-0x447f] has been reserved
[    0.121507] system 00:00: [io  0x4480-0x44ff] has been reserved
[    0.121511] system 00:00: [io  0x4200-0x427f] has been reserved
[    0.121514] system 00:00: [io  0x4280-0x42ff] has been reserved
[    0.121519] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.121533] pnp 00:01: [io  0x5000-0x503f]
[    0.121536] pnp 00:01: [io  0x5100-0x513f]
[    0.121584] system 00:01: [io  0x5000-0x503f] has been reserved
[    0.121587] system 00:01: [io  0x5100-0x513f] has been reserved
[    0.121592] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.121754] pnp 00:02: [mem 0x000d9800-0x000dbfff]
[    0.121758] pnp 00:02: [mem 0x000f0000-0x000f7fff]
[    0.121761] pnp 00:02: [mem 0x000f8000-0x000fbfff]
[    0.121763] pnp 00:02: [mem 0x000fc000-0x000fffff]
[    0.121766] pnp 00:02: [mem 0x1fff0000-0x1fffffff]
[    0.121769] pnp 00:02: [mem 0xffff0000-0xffffffff]
[    0.121772] pnp 00:02: [mem 0x00000000-0x0009ffff]
[    0.121774] pnp 00:02: [mem 0x00100000-0x1ffeffff]
[    0.121777] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[    0.121780] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[    0.121830] system 00:02: [mem 0x000d9800-0x000dbfff] has been reserved
[    0.121834] system 00:02: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.121837] system 00:02: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.121841] system 00:02: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.121845] system 00:02: [mem 0x1fff0000-0x1fffffff] could not be reserved
[    0.121848] system 00:02: [mem 0xffff0000-0xffffffff] has been reserved
[    0.121852] system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.121855] system 00:02: [mem 0x00100000-0x1ffeffff] could not be reserved
[    0.121859] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.121863] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.121867] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.121931] pnp 00:03: [bus 00-ff]
[    0.121934] pnp 00:03: [io  0x0cf8-0x0cff]
[    0.121937] pnp 00:03: [io  0x0cf0-0x0cf3]
[    0.121940] pnp 00:03: [io  0x0000-0x0cf7 window]
[    0.121943] pnp 00:03: [io  0x0d00-0xffff window]
[    0.121946] pnp 00:03: [mem 0x000a0000-0x000bffff window]
[    0.121949] pnp 00:03: [mem 0x000c0000-0x000dffff window]
[    0.121952] pnp 00:03: [mem 0x20000000-0xfebfffff window]
[    0.122031] pnp 00:03: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.122533] pnp 00:04: [io  0x0010-0x001f]
[    0.122537] pnp 00:04: [io  0x0022-0x003f]
[    0.122540] pnp 00:04: [io  0x0044-0x005f]
[    0.122542] pnp 00:04: [io  0x0062-0x0063]
[    0.122545] pnp 00:04: [io  0x0065-0x006f]
[    0.122547] pnp 00:04: [io  0x0074-0x007f]
[    0.122550] pnp 00:04: [io  0x0091-0x0093]
[    0.122553] pnp 00:04: [io  0x00a2-0x00bf]
[    0.122555] pnp 00:04: [io  0x00e0-0x00ef]
[    0.122558] pnp 00:04: [io  0x0b78-0x0b7b]
[    0.122560] pnp 00:04: [io  0x0f78-0x0f7b]
[    0.122563] pnp 00:04: [io  0x0a78-0x0a7b]
[    0.122565] pnp 00:04: [io  0x0e78-0x0e7b]
[    0.122568] pnp 00:04: [io  0x0bbc-0x0bbf]
[    0.122570] pnp 00:04: [io  0x0fbc-0x0fbf]
[    0.122573] pnp 00:04: [io  0x04d0-0x04d1]
[    0.122575] pnp 00:04: [io  0x0294-0x0297]
[    0.122642] system 00:04: [io  0x0b78-0x0b7b] has been reserved
[    0.122646] system 00:04: [io  0x0f78-0x0f7b] has been reserved
[    0.122649] system 00:04: [io  0x0a78-0x0a7b] has been reserved
[    0.122652] system 00:04: [io  0x0e78-0x0e7b] has been reserved
[    0.122656] system 00:04: [io  0x0bbc-0x0bbf] has been reserved
[    0.122659] system 00:04: [io  0x0fbc-0x0fbf] has been reserved
[    0.122662] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.122665] system 00:04: [io  0x0294-0x0297] has been reserved
[    0.122669] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.122686] pnp 00:05: [dma 4]
[    0.122688] pnp 00:05: [io  0x0000-0x000f]
[    0.122691] pnp 00:05: [io  0x0080-0x0090]
[    0.122694] pnp 00:05: [io  0x0094-0x009f]
[    0.122696] pnp 00:05: [io  0x00c0-0x00df]
[    0.122748] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.122762] pnp 00:06: [io  0x0070-0x0073]
[    0.122780] pnp 00:06: [irq 8]
[    0.122827] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.122839] pnp 00:07: [io  0x0061]
[    0.122886] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.122898] pnp 00:08: [io  0x00f0-0x00ff]
[    0.122904] pnp 00:08: [irq 13]
[    0.122955] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.123081] pnp 00:09: [io  0x03f0-0x03f5]
[    0.123084] pnp 00:09: [io  0x03f7]
[    0.123091] pnp 00:09: [irq 6]
[    0.123093] pnp 00:09: [dma 2]
[    0.123159] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.123340] pnp 00:0a: [io  0x03f8-0x03ff]
[    0.123353] pnp 00:0a: [irq 4]
[    0.123432] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.123629] pnp 00:0b: [io  0x02f8-0x02ff]
[    0.123636] pnp 00:0b: [irq 3]
[    0.123714] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.124065] pnp 00:0c: [io  0x0378-0x037f]
[    0.124069] pnp 00:0c: [io  0x0778-0x077b]
[    0.124076] pnp 00:0c: [irq 7]
[    0.124156] pnp 00:0c: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.124259] pnp 00:0d: [io  0x0060]
[    0.124262] pnp 00:0d: [io  0x0064]
[    0.124269] pnp 00:0d: [irq 1]
[    0.124320] pnp 00:0d: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.124561] pnp 00:0e: [io  0x0201-0x0207]
[    0.124564] pnp 00:0e: [io  0x0200]
[    0.124626] pnp 00:0e: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.124824] pnp 00:0f: [io  0x0330-0x0331]
[    0.124832] pnp 00:0f: [irq 10]
[    0.124906] pnp 00:0f: Plug and Play ACPI device, IDs PNPb006 (active)
[    0.124918] pnp: PnP ACPI: found 16 devices
[    0.124920] ACPI: ACPI bus type pnp unregistered
[    0.124925] PnPBIOS: Disabled by ACPI PNP
[    0.161911] Switching to clocksource acpi_pm
[    0.161950] pci 0000:00:08.0: PCI bridge to [bus 02-02]
[    0.161953] pci 0000:00:08.0:   bridge window [io  disabled]
[    0.161960] pci 0000:00:08.0:   bridge window [mem disabled]
[    0.161965] pci 0000:00:08.0:   bridge window [mem pref disabled]
[    0.161977] pci 0000:01:00.0: BAR 6: assigned [mem 0xe5000000-0xe501ffff pref]
[    0.161982] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[    0.161984] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.161990] pci 0000:00:1e.0:   bridge window [mem 0xe4000000-0xe5ffffff]
[    0.161995] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.162009] pci 0000:00:08.0: setting latency timer to 64
[    0.162018] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.162021] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.162025] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe5ffffff]
[    0.162028] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
[    0.162087] NET: Registered protocol family 2
[    0.162166] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.162406] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.162589] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.162777] TCP: Hash tables configured (established 16384 bind 16384)
[    0.162780] TCP reno registered
[    0.162784] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.162798] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.162882] NET: Registered protocol family 1
[    0.173233] Switched to NOHz mode on CPU #0
[    0.208067] pci 0000:01:00.0: Boot video device
[    0.208072] PCI: CLS 0 bytes, default 32
[    0.208387] cpufreq-nforce2: Detected nForce2 chipset revision C1
[    0.208390] cpufreq-nforce2: FSB changing is maybe unstable and can lead to crashes and data loss.
[    0.208399] cpufreq-nforce2: FSB currently at 167 MHz, FID 12.5
[    0.208611] audit: initializing netlink socket (disabled)
[    0.208628] type=2000 audit(1315003410.204:1): initialized
[    0.219208] Trying to unpack rootfs image as initramfs...
[    0.236677] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.244525] VFS: Disk quotas dquot_6.5.2
[    0.244610] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.245511] fuse init (API version 7.16)
[    0.245631] msgmni has been set to 966
[    0.252427] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.252472] io scheduler noop registered
[    0.252475] io scheduler deadline registered
[    0.252494] io scheduler cfq registered (default)
[    0.252708] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.252743] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.252967] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.252976] ACPI: Power Button [PWRB]
[    0.253049] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.253054] ACPI: Power Button [PWRF]
[    0.253130] ACPI: Fan [FAN] (on)
[    0.253408] ACPI: acpi_idle registered with cpuidle
[    0.256152] thermal LNXTHERM:00: registered as thermal_zone0
[    0.256156] ACPI: Thermal Zone [THRM] (30 C)
[    0.256250] ERST: Table is not found!
[    0.256391] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.276879] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.280310] isapnp: Scanning for PnP cards...
[    0.368777] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.409919] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.496702] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.520691] Linux agpgart interface v0.103
[    0.520787] agpgart: Detected NVIDIA nForce2 chipset
[    0.528397] agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[    0.530072] brd: module loaded
[    0.530836] loop: module loaded
[    0.530989] i2c-core: driver [adp5520] using legacy suspend method
[    0.530992] i2c-core: driver [adp5520] using legacy resume method
[    0.531257] pata_acpi 0000:00:09.0: setting latency timer to 64
[    0.531762] Fixed MDIO Bus: probed
[    0.531828] PPP generic driver version 2.4.2
[    0.531887] tun: Universal TUN/TAP device driver, 1.6
[    0.531890] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.531995] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.579975] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    0.580021] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 22 (level, high) -> IRQ 22
[    0.580046] ehci_hcd 0000:00:02.2: setting latency timer to 64
[    0.580051] ehci_hcd 0000:00:02.2: EHCI Host Controller
[    0.580206] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[    0.580258] ehci_hcd 0000:00:02.2: debug port 1
[    0.580267] ehci_hcd 0000:00:02.2: cache line size of 32 is not supported
[    0.580293] ehci_hcd 0000:00:02.2: irq 22, io mem 0xe6004000
[    0.592122] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
[    0.592388] hub 1-0:1.0: USB hub found
[    0.592396] hub 1-0:1.0: 6 ports detected
[    0.592510] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.592773] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[    0.592798] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, high) -> IRQ 21
[    0.592823] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.592828] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.592896] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.592940] ohci_hcd 0000:00:02.0: irq 21, io mem 0xe6002000
[    0.670284] hub 2-0:1.0: USB hub found
[    0.670295] hub 2-0:1.0: 3 ports detected
[    0.670607] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
[    0.670632] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 20 (level, high) -> IRQ 20
[    0.670658] ohci_hcd 0000:00:02.1: setting latency timer to 64
[    0.670662] ohci_hcd 0000:00:02.1: OHCI Host Controller
[    0.670732] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[    0.670775] ohci_hcd 0000:00:02.1: irq 20, io mem 0xe6003000
[    0.752615] hub 3-0:1.0: USB hub found
[    0.752626] hub 3-0:1.0: 3 ports detected
[    0.752735] uhci_hcd: USB Universal Host Controller Interface driver
[    0.752885] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.752888] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.753626] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.753789] mousedev: PS/2 mouse device common for all mice
[    0.753973] rtc_cmos 00:06: RTC can wake from S4
[    0.754051] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.754080] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    0.754180] device-mapper: uevent: version 1.0.3
[    0.754276] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    0.756883] device-mapper: multipath: version 1.2.0 loaded
[    0.756889] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.757059] EISA: Probing bus 0 at eisa.0
[    0.757086] Cannot allocate resource for EISA slot 4
[    0.757089] Cannot allocate resource for EISA slot 5
[    0.757106] EISA: Detected 0 cards.
[    0.759274] cpuidle: using governor ladder
[    0.759279] cpuidle: using governor menu
[    0.759626] TCP cubic registered
[    0.759840] NET: Registered protocol family 10
[    0.760530] NET: Registered protocol family 17
[    0.760569] Registering the dns_resolver key type
[    0.760612] powernow-k8: Processor cpuid 6a0 not supported
[    0.760637] Using IPI No-Shortcut mode
[    0.760824] PM: Hibernation image not present or could not be loaded.
[    0.760841] registered taskstats version 1
[    0.761037]   Magic number: 11:187:754
[    0.761078] tty ttyS5: hash matches
[    0.761189] rtc_cmos 00:06: setting system clock to 2011-09-02 22:43:31 UTC (1315003411)
[    0.761193] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.761195] EDD information not available.
[    0.773659] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.919879] isapnp: No Plug & Play device found
[    0.932119] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    1.045891] Freeing initrd memory: 12544k freed
[    1.061959] Freeing unused kernel memory: 700k freed
[    1.062842] Write protecting the kernel text: 5192k
[    1.062884] Write protecting the kernel read-only data: 2148k
[    1.078314] hub 1-2:1.0: USB hub found
[    1.078621] hub 1-2:1.0: 4 ports detected
[    1.091069] <30>udev[60]: starting version 167
[    1.216089] Refined TSC clocksource calibration: 2088.068 MHz.
[    1.216099] Switching to clocksource tsc
[    1.291314] Floppy drive(s): fd0 is 1.44M
[    1.302225] pata_amd 0000:00:09.0: version 0.4.1
[    1.302309] pata_amd 0000:00:09.0: setting latency timer to 64
[    1.337111] scsi0 : pata_amd
[    1.346155] scsi1 : pata_amd
[    1.346841] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.346845] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.348598] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.348825] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[    1.348834] forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 22 (level, high) -> IRQ 22
[    1.348842] forcedeth 0000:00:04.0: setting latency timer to 64
[    1.352424] usb 1-2.4: new low speed USB device using ehci_hcd and address 3

[beryllium]

och den sista delen

Kod: Markera allt

[    1.354196] FDC 0 is a post-1991 82077
[    1.676506] ata1.00: ATA-7: Maxtor 6Y080P0, YAR41BW0, max UDMA/133
[    1.676512] ata1.00: 160086528 sectors, multi 16: LBA 
[    1.676519] ata1.01: ATAPI: CDU5211, YYS7, max UDMA/33
[    1.676530] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c00000) ACPI=0x7f01f (15:60:0x1f)
[    1.676536] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc7c00000) ACPI=0x701f (15:60:0x1f)
[    1.692403] ata1.00: configured for UDMA/133
[    1.700382] ata1.01: configured for UDMA/33
[    1.700754] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080P0   YAR4 PQ: 0 ANSI: 5
[    1.701004] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.701380] scsi 0:0:1:0: CD-ROM            SONY     CD-ROM CDU5211   YYS7 PQ: 0 ANSI: 5
[    1.702846] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[    1.702851] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.703009] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.703093] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.703274] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[    1.703693] sd 0:0:0:0: [sda] Write Protect is off
[    1.703698] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.703734] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.742973]  sda: sda1 sda2 < sda5 > sda3
[    1.743432] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.873022] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x57d @ 1, addr 00:00:00:21:07:41
[    1.873029] forcedeth 0000:00:04.0: timirq lnktim desc-v1
[    1.893979] usbcore: registered new interface driver usbhid
[    1.893983] usbhid: USB HID core driver
[    1.906800] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:02.2/usb1/1-2/1-2.4/1-2.4:1.0/input/input3
[    1.907132] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:02.2-2.4/input0
[    2.304854] EXT3-fs: barriers not enabled
[    2.318146] kjournald starting.  Commit interval 5 seconds
[    2.318185] EXT3-fs (sda1): mounted filesystem with ordered data mode
[    4.856036] usb 1-5: new high speed USB device using ehci_hcd and address 4
[   12.999795] Adding 522236k swap on /dev/sda5.  Priority:-1 extents:1 across:522236k 
[   13.426345] <30>udev[351]: starting version 167
[   13.865979] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.867540] i2c i2c-0: nForce2 SMBus adapter at 0x5000
[   13.867610] i2c i2c-1: nForce2 SMBus adapter at 0x5100
[   13.935559] lp: driver loaded but no devices found
[   14.044931] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.064315] parport_pc 00:0c: reported by Plug and Play ACPI
[   14.064378] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   14.154307] lp0: using parport0 (interrupt-driven).
[   14.240489] gameport gameport0: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x201, speed 59659kHz
[   14.344126] usbcore: registered new interface driver uas
[   14.521543] nf_conntrack version 0.5.0 (7937 buckets, 31748 max)
[   14.582654] Initializing USB Mass Storage driver...
[   14.582845] scsi2 : usb-storage 1-5:1.0
[   14.583259] scsi3 : usb-storage 1-5:1.1
[   14.591325] usbcore: registered new interface driver usb-storage
[   14.591332] USB Mass Storage support registered.
[   14.754552] ppdev: user-space parallel port driver
[   15.012620] type=1400 audit(1315003425.747:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=477 comm="apparmor_parser"
[   15.013066] type=1400 audit(1315003425.747:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=477 comm="apparmor_parser"
[   15.013340] type=1400 audit(1315003425.747:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=477 comm="apparmor_parser"
[   15.014206] type=1400 audit(1315003425.747:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=583 comm="apparmor_parser"
[   15.014660] type=1400 audit(1315003425.747:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=583 comm="apparmor_parser"
[   15.014956] type=1400 audit(1315003425.747:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=583 comm="apparmor_parser"
[   15.079590] type=1400 audit(1315003425.815:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=654 comm="apparmor_parser"
[   15.080412] type=1400 audit(1315003425.815:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=655 comm="apparmor_parser"
[   15.345043] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   15.392599] nvidia: module license 'NVIDIA' taints kernel.
[   15.392606] Disabling lock debugging due to kernel taint
[   15.902783] scsi 3:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[   15.903059] scsi 2:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[   15.906625] sr1: scsi-1 drive
[   15.907000] sr 2:0:0:0: Attached scsi CD-ROM sr1
[   15.907269] sr 2:0:0:0: Attached scsi generic sg2 type 5
[   15.907630] sd 3:0:0:0: Attached scsi generic sg3 type 0
[   15.909381] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[   16.419614] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[   16.419642] nvidia 0000:01:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
[   16.419657] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   16.421524] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.30  Thu Apr 14 08:47:14 PDT 2011
[   16.598557] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
[   16.598568] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 21 (level, high) -> IRQ 21
[   16.598610] Intel ICH 0000:00:06.0: setting latency timer to 64
[   16.929991] intel8x0_measure_ac97_clock: measured 57346 usecs (2784 samples)
[   16.929997] intel8x0: clocking to 47459
[   17.712982] EXT3-fs (sda1): using internal journal
[   18.259157] EXT3-fs: barriers not enabled
[   18.275875] kjournald starting.  Commit interval 5 seconds
[   18.276129] EXT3-fs (sda3): using internal journal
[   18.276136] EXT3-fs (sda3): mounted filesystem with ordered data mode
[   20.079738] type=1400 audit(1315003430.811:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=929 comm="apparmor_parser"
[   20.083942] type=1400 audit(1315003430.815:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=931 comm="apparmor_parser"
[   20.084656] type=1400 audit(1315003430.819:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=931 comm="apparmor_parser"
[   20.084959] type=1400 audit(1315003430.819:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=931 comm="apparmor_parser"
[   20.185622] type=1400 audit(1315003430.919:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=932 comm="apparmor_parser"
[   20.211919] vesafb: framebuffer at 0xd0000000, mapped to 0xe0b80000, using 5120k, total 5120k
[   20.211925] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[   20.211928] vesafb: scrolling: redraw
[   20.211932] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   20.213180] Console: switching to colour frame buffer device 160x64
[   20.213234] fb0: VESA VGA frame buffer device
[   20.235823] type=1400 audit(1315003430.967:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=932 comm="apparmor_parser"
[   20.255493] type=1400 audit(1315003430.987:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=932 comm="apparmor_parser"
[   20.306576] type=1400 audit(1315003431.039:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=957 comm="apparmor_parser"
[   20.307174] type=1400 audit(1315003431.039:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=957 comm="apparmor_parser"
[   20.379806] type=1400 audit(1315003431.111:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=959 comm="apparmor_parser"
[   21.510364] forcedeth 0000:00:04.0: eth0: no link during initialization
[   21.510838] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.654669] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
[   24.654687] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
[   24.654739] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[   45.677288] EXT3-fs: barriers not enabled
[   45.686239] kjournald starting.  Commit interval 5 seconds
[   45.686285] EXT3-fs (loop0): using internal journal
[   45.686291] EXT3-fs (loop0): mounted filesystem with ordered data mode
[   61.023494] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00
[   61.023511] sr: Sense Key : Hardware Error [current] 
[   61.023515] sr: Add. Sense: No additional sense information
[  169.533751] ondemand governor failed, too long transition latency of HW, fallback to performance governor
kristian@kristian-desktop:~$ 

[/code]

[beryllium]

En möjlighet till. Kör i terminalen

Kod: Markera allt

sudo modprobe usbserial vendor=0x12d1 product=0x1003

Kolla sedan om den finns med under nätverksanslutningar.
Funkar det ?

får inget svar alls, trots flera försök.

Kod: Markera allt

kristian@kristian-desktop:~$ sudo modprobe usbserial vendor=0x12d1 product=0x1003
[sudo] password for kristian: 
kristian@kristian-desktop:~$ sudo modprobe usbserial vendor=0x12d1 product=0x1003
kristian@kristian-desktop:~$ 

[ubot]

Jag hittade inget fel i loggarna. Jag har en idé om att ha ett skript som avmonterar/monterar modulen som hör till modemet. Då skulle det skriptet kunna läggas in i Starup applications och kanske få modemet att i praktiken fungera från det att användaren loggar in.

[P.Forsberg]

Jag hittade inget fel i loggarna. Jag har en idé om att ha ett skript som avmonterar/monterar modulen som hör till modemet. Då skulle det skriptet kunna läggas in i Starup applications och kanske få modemet att i praktiken fungera från det att användaren loggar in.

I den vanliga Ubuntu finns den under /etc/modules som går att redigera med

Kod: Markera allt

sudo gedit /etc/modules

och lägga till

Kod: Markera allt

modprobe usbserial vendor=0x12d1 product=0x1003

Då laddas modulen direkt vid start.
Fast jag vet inte hur det är i Xubuntu...

[Kurdistan]

Xubuntu kommer inte med "gedit" från start, utan mousepad.

[beryllium]

ska testa det och se vad som händer men nu de senaste gångerna så har jag dessutom haft problem med att anslutningen frånkopplas efter det att jag fått det att funka genom och sätta in modemet efter uppstart. Hittade iaf modellnr E122, om det hjälper.

om xubuntu själv frånkopplar/avmonterar (är det samma sak?) så borde väl inte ett uppstarts script göra någon skillnad eller?