Inget ljud efter installation av Ubuntu 9.04 LÖST

[krassegrand]

Det är rätt att den uppackade mappen "alsa-driver-0.4.0.tar.gz" ligger i downloads?

[krassegrand]

Jag tycker det ser ganska likt ut, varför utesluter den "/home/jorgen/downloads/alsa-driver-0.4.0" ?

jorgen@jorgen-desktop:~$ sudo mkdir -p /usr/src/alsa
jorgen@jorgen-desktop:~$ cd /usr/src/alsa
jorgen@jorgen-desktop:/usr/src/alsa$ sudo cp ~/downloads/alsa* .
cp: utesluter katalog "/home/jorgen/downloads/alsa-driver-0.4.0"
jorgen@jorgen-desktop:/usr/src/alsa$ sudo tar xjf alsa-driver*.bz2
tar: alsa-driver*.bz2: Funktion "open" misslyckades: Filen eller katalogen finns inte
tar: Felet kan inte åtgärdas, avslutar nu
tar: Child returned status 2
tar: Avslut med felslutstatus fördröjd från föregående fel
jorgen@jorgen-desktop:/usr/src/alsa$

Innan sudo cp...

jorgen@jorgen-desktop:/usr/src/alsa$ sudo chown --recursive root:admin /home/jorgen/downloads/
jorgen@jorgen-desktop:/usr/src/alsa$ sudo chmod --recursive 770 /home/jorgen/downloads/
jorgen@jorgen-desktop:/usr/src/alsa$ sudo cp ~/downloads/alsa* .
Och fortsätt enligt ovan...

Den utesluter forfarande "/home/jorgen/downloads/alsa-driver-0.4.0"

jorgen@jorgen-desktop:~$ cd /usr/src/alsa
jorgen@jorgen-desktop:/usr/src/alsa$ sudo chown --recursive root:admin /home/jorgen/downloads/
[sudo] password for jorgen:
jorgen@jorgen-desktop:/usr/src/alsa$ sudo chmod --recursive 770 /home/jorgen/downloads/
jorgen@jorgen-desktop:/usr/src/alsa$ sudo cp ~/downloads/alsa* .
cp: utesluter katalog "/home/jorgen/downloads/alsa-driver-0.4.0"
jorgen@jorgen-desktop:/usr/src/alsa$

[krassegrand]

jorgen@jorgen-desktop:~$ cd /home/jorgen/downloads/
jorgen@jorgen-desktop:~/downloads$ dir
alsa-driver-0.4.0
jorgen@jorgen-desktop:~/downloads$

Är detta till hjälp?

[krassegrand]

Små små steg?

jorgen@jorgen-desktop:~$ cd /usr/src/alsa
jorgen@jorgen-desktop:/usr/src/alsa$ sudo cp ~/downloads/alsa* .
cp: utesluter katalog "/home/jorgen/downloads/alsa-driver-1.0.9rc4a"
jorgen@jorgen-desktop:/usr/src/alsa$ sudo tar xjf alsa-driver*.bz2
jorgen@jorgen-desktop:/usr/src/alsa$ sudo tar xjf alsa-lib*.tar.bz2
tar: alsa-lib*.tar.bz2: Funktion "open" misslyckades: Filen eller katalogen finns inte
tar: Felet kan inte åtgärdas, avslutar nu
tar: Child returned status 2
tar: Avslut med felslutstatus fördröjd från föregående fel
jorgen@jorgen-desktop:/usr/src/alsa$

[krassegrand]

Senaste försöket

jorgen@jorgen-desktop:~$ sudo chown --recursive root:admin /home/jorgen/downloads/
[sudo] password for jorgen:
jorgen@jorgen-desktop:~$ cd /usr/src/alsa
jorgen@jorgen-desktop:/usr/src/alsa$ sudo chown --recursive root:admin /home/jorgen/downloads/
jorgen@jorgen-desktop:/usr/src/alsa$ sudo chmod --recursive 770 /home/jorgen/downloads/
jorgen@jorgen-desktop:/usr/src/alsa$ sudo cp ~/downloads/alsa* .
cp: utesluter katalog "/home/jorgen/downloads/alsa-driver-1.0.9rc4a"
jorgen@jorgen-desktop:/usr/src/alsa$

[bbauto]

Senaste försöket

jorgen@jorgen-desktop:~$ sudo chown --recursive root:admin /home/jorgen/downloads/
[sudo] password for jorgen:
jorgen@jorgen-desktop:~$ cd /usr/src/alsa
jorgen@jorgen-desktop:/usr/src/alsa$ sudo chown --recursive root:admin /home/jorgen/downloads/
jorgen@jorgen-desktop:/usr/src/alsa$ sudo chmod --recursive 770 /home/jorgen/downloads/
jorgen@jorgen-desktop:/usr/src/alsa$ sudo cp ~/downloads/alsa* .
cp: utesluter katalog "/home/jorgen/downloads/alsa-driver-1.0.9rc4a"
jorgen@jorgen-desktop:/usr/src/alsa$

Jag kan inte se vad som är fel!? gör så här istället då Program->Tillbehör->Terminalen
gksu nautilus
Visa->Visa dolda filer...
Navigera till /home/jorgen/downloads/->Markera allt som börjar med alsa ->Kopiera
Navigera till /usr/src/alsa->Klistra in

Är det någon fil/mapp som trillskas, så får du högerklicka på den->Egenskaper->Rättigheter
root skall ha läs o skrivrättigheter som ägare eller grupp.

[krassegrand]

Det fanns en mapp i downloads "/home/jorgen/downloads/alsa-driver-1.0.9rc4a"
Den packade filen ska väl inte vara kvar?
Jag kopierade hela "/home/jorgen/downloads/alsa-driver-1.0.9rc4a" till "/usr/src/alsa" vissa filer fanns redan men jag ersatte alla och slog ihop (eller nåt sånt) andra. Då ska jag väl inte köra sudo "cp ~/downloads/alsa* ."? Jag har provat det med men det hjälper inte.

jorgen@jorgen-desktop:~$ cd /usr/src/alsa
jorgen@jorgen-desktop:/usr/src/alsa$ sudo tar xjf alsa-driver*.bz2
[sudo] password for jorgen:
jorgen@jorgen-desktop:/usr/src/alsa$ sudo tar xjf alsa-lib*.tar.bz2
tar: alsa-lib*.tar.bz2: Funktion "open" misslyckades: Filen eller katalogen finns inte
tar: Felet kan inte åtgärdas, avslutar nu
tar: Child returned status 2
tar: Avslut med felslutstatus fördröjd från föregående fel
jorgen@jorgen-desktop:/usr/src/alsa$

[krassegrand]

Ska jag ta ut filerna ur mappen "alsa-driver-1.0.9rc4a" och lägga dem i mappen downloads?

Jörgen

[bbauto]

Ska jag ta ut filerna ur mappen "alsa-driver-1.0.9rc4a" och lägga dem i mappen downloads?

Jörgen

Ehh har du packat upp arkiven?? Du ska ha 3st filer under downloads, annars får du ta bort allt under downloads och spara ned på nytt!
du ska ha och kopiera dessa:
alsa-driver*.bz2
alsa-lib*.tar.bz2
alsa-utils*.tar.bz2

[krassegrand]

Vilken ska jag välja från denna sida?

ftp://ftp.alsa-project.org/pub/driver/

[bbauto]

Vilken ska jag välja från denna sida?

ftp://ftp.alsa-project.org/pub/driver/

Enligt guiden:

ftp://ftp.alsa-project.org/pub/driver/a ... 20.tar.bz2
ftp://ftp.alsa-project.org/pub/lib/alsa ... 20.tar.bz2
ftp://ftp.alsa-project.org/pub/utils/al ... 20.tar.bz2

Spara till downloads...

[krassegrand]

Nu ska jag titta på Schreck!

jorgen@jorgen-desktop:~$ cd /usr/src/alsa
jorgen@jorgen-desktop:/usr/src/alsa$ sudo cp ~/downloads/alsa* .
cp: utesluter katalog "/home/jorgen/downloads/alsa-driver-1.0.20"
cp: utesluter katalog "/home/jorgen/downloads/alsa-lib-1.0.20"
cp: utesluter katalog "/home/jorgen/downloads/alsa-utils-1.0.20"
jorgen@jorgen-desktop:/usr/src/alsa$ sudo tar xjf alsa-driver*.bz2
tar: alsa-driver-1.0.9rc4a.tar.bz2: Fanns inte i arkivet
tar: Avslut med felslutstatus fördröjd från föregående fel
jorgen@jorgen-desktop:/usr/src/alsa$ sudo tar xjf alsa-lib*.tar.bz2
jorgen@jorgen-desktop:/usr/src/alsa$ sudo tar xjf alsa-utils*.tar.bzjorgen@jorgen-desktop:~$ cd /usr/src/alsa
jorgen@jorgen-desktop:/usr/src/alsa$ sudo cp ~/downloads/alsa* .
cp: utesluter katalog "/home/jorgen/downloads/alsa-driver-1.0.20"
cp: utesluter katalog "/home/jorgen/downloads/alsa-lib-1.0.20"
cp: utesluter katalog "/home/jorgen/downloads/alsa-utils-1.0.20"
jorgen@jorgen-desktop:/usr/src/alsa$ sudo tar xjf alsa-driver*.bz2
tar: alsa-driver-1.0.9rc4a.tar.bz2: Fanns inte i arkivet
tar: Avslut med felslutstatus fördröjd från föregående fel
jorgen@jorgen-desktop:/usr/src/alsa$ sudo tar xjf alsa-lib*.tar.bz2
jorgen@jorgen-desktop:/usr/src/alsa$ sudo tar xjf alsa-utils*.tar.bz2
jorgen@jorgen-desktop:/usr/src/alsa$ cd alsa-driver*
bash: cd: alsa-driver-1.0.20.tar.bz2: Inte en katalog
jorgen@jorgen-desktop:/usr/src/alsa$ cd alsa-driver*
bash: cd: alsa-driver-1.0.20.tar.bz2: Inte en katalog
jorgen@jorgen-desktop:/usr/src/alsa$



2
jorgen@jorgen-desktop:/usr/src/alsa$ cd alsa-driver*
bash: cd: alsa-driver-1.0.20.tar.bz2: Inte en katalog
jorgen@jorgen-desktop:/usr/src/alsa$ cd alsa-driver*
bash: cd: alsa-driver-1.0.20.tar.bz2: Inte en katalog
jorgen@jorgen-desktop:/usr/src/alsa$

[bbauto]

Sista gången gillt:
Program->Tillbehör->Terminalen
cd downloads
jorgen@jorgen-desktop:~/downloads$ sudo cp ./* /usr/src/alsa

[krassegrand]

make[3]: Lämnar katalogen "/usr/src/alsa/alsa-utils-1.0.20/seq/aseqnet"
make[2]: Lämnar katalogen "/usr/src/alsa/alsa-utils-1.0.20/seq/aseqnet"
make[2]: Går till katalogen "/usr/src/alsa/alsa-utils-1.0.20/seq"
make[3]: Går till katalogen "/usr/src/alsa/alsa-utils-1.0.20/seq"
make[3]: Inget behöver göras för "install-exec-am".
make[3]: Inget behöver göras för "install-data-am".
make[3]: Lämnar katalogen "/usr/src/alsa/alsa-utils-1.0.20/seq"
make[2]: Lämnar katalogen "/usr/src/alsa/alsa-utils-1.0.20/seq"
make[1]: Lämnar katalogen "/usr/src/alsa/alsa-utils-1.0.20/seq"
make[1]: Går till katalogen "/usr/src/alsa/alsa-utils-1.0.20"
make[2]: Går till katalogen "/usr/src/alsa/alsa-utils-1.0.20"
make[2]: Inget behöver göras för "install-exec-am".
make[2]: Inget behöver göras för "install-data-am".
make[2]: Lämnar katalogen "/usr/src/alsa/alsa-utils-1.0.20"
make[1]: Lämnar katalogen "/usr/src/alsa/alsa-utils-1.0.20"
jorgen@jorgen-desktop:/usr/src/alsa/alsa-utils-1.0.20$


Nu ska jag boota om!

[bbauto]

Grattis! Nu får vi hoppas att resten fungerar som det ska...

[krassegrand]

När jag vill testa ljudet blir det så här

audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink: Kunde inte öppna ljudenheten för uppspelning.

Jag har använt komandot på https://help.ubuntu.com/community/HdaIntelSoundHowto för att

jorgen@jorgen-desktop:~$ sudo apt-get install libncurses5-dev
[sudo] password for jorgen:
Läser paketlistor... Färdig
Bygger beroendeträd
Läser tillståndsinformation... Färdig
libncurses5-dev är redan den senaste versionen.
0 att uppgradera, 0 att nyinstallera, 0 att ta bort och 0 att inte uppgradera.
jorgen@jorgen-desktop:~$

if you have no sound, run dmesg and look for the string "snd_"

[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:9ff80000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389824
[ 0.000000] Kernel command line: root=UUID=a0491c80-92be-4d40-8abc-e110b914f2a4 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1601.877 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 7859840 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 1534880k/1572032k available (4126k kernel code, 35848k reserved, 2208k data, 532k init, 666824k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)




"Alldeles för många tecken"








[ 0.611883] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 0.611888] pci 0000:00:01.0: MEM window: 0xfcb00000-0xfd0fffff
[ 0.611892] pci 0000:00:01.0: PREFETCH window: 0x000000d4800000-0x000000f47fffff
[ 0.611907] pci 0000:00:01.0: setting latency timer to 64
[ 0.611911] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.611914] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.611917] bus: 01 index 0 io port: [0xa000-0xafff]
[ 0.611919] bus: 01 index 1 mmio: [0xfcb00000-0xfd0fffff]
[ 0.611922] bus: 01 index 2 mmio: [0xd4800000-0xf47fffff]
[ 0.611924] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.611939] NET: Registered protocol family 2
[ 0.612089] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.612472] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.613839] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.614520] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.614524] TCP reno registered
[ 0.614652] NET: Registered protocol family 1
[ 0.614804] checking if image is initramfs... it is
[ 1.112110] Switched to high resolution mode on CPU 0
[ 1.336838] Freeing initrd memory: 7305k freed
[ 1.336953] cpufreq: No nForce2 chipset.
[ 1.337112] audit: initializing netlink socket (disabled)
[ 1.337134] type=2000 audit(1243893338.336:1): initialized
[ 1.346833] highmem bounce pool size: 64 pages
[ 1.346840] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.348229] VFS: Disk quotas dquot_6.5.1
[ 1.348298] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.348974] fuse init (API version 7.10)
[ 1.349071] msgmni has been set to 1711
[ 1.349304] alg: No test for stdrng (krng)
[ 1.349318] io scheduler noop registered
[ 1.349320] io scheduler anticipatory registered
[ 1.349322] io scheduler deadline registered
[ 1.349349] io scheduler cfq registered (default)
[ 1.349365] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.349393] pci 0000:00:0d.0: Firmware left e100 interrupts enabled; disabling
[ 1.349475] pci 0000:01:00.0: Boot video device
[ 1.351894] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.351904] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.352069] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.352072] ACPI: Power Button (FF) [PWRF]
[ 1.352126] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.352133] ACPI: Power Button (CM) [PWRB]
[ 1.352182] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.352187] ACPI: Sleep Button (CM) [SLPB]
[ 1.352361] processor ACPI_CPU:00: registered as cooling_device0
[ 1.354427] isapnp: Scanning for PnP cards...
[ 1.707875] isapnp: No Plug & Play device found
[ 1.709349] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.709439] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.709775] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.710594] brd: module loaded
[ 1.710962] loop: module loaded
[ 1.711069] Fixed MDIO Bus: probed
[ 1.711077] PPP generic driver version 2.4.2
[ 1.711156] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.711197] Driver 'sd' needs updating - please use bus_type methods
[ 1.711207] Driver 'sr' needs updating - please use bus_type methods
[ 1.711382] sata_via 0000:00:0f.0: version 2.4
[ 1.711402] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.711457] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 1.711593] scsi0 : sata_via
[ 1.711711] scsi1 : sata_via
[ 1.711754] ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 20
[ 1.711757] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 20
[ 1.912043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.090644] ata1.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133
[ 2.090648] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.105192] ata1.00: configured for UDMA/133
[ 2.308030] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.318774] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5
[ 2.318895] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 2.318913] sd 0:0:0:0: [sda] Write Protect is off
[ 2.318916] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.318944] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.319022] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 2.319037] sd 0:0:0:0: [sda] Write Protect is off
[ 2.319040] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.319066] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.319071] sda: sda1 sda2 < sda5 >
[ 2.355786] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.355851] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.356375] pata_via 0000:00:0f.1: version 0.3.3
[ 2.356392] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.356624] scsi2 : pata_via
[ 2.356701] scsi3 : pata_via
[ 2.358689] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 2.358693] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 2.521948] ata3.00: ATA-7: Maxtor 6L160P0, BAH41E00, max UDMA/133
[ 2.521951] ata3.00: 320173056 sectors, multi 16: LBA48
[ 2.537769] ata3.00: configured for UDMA/133
[ 2.700366] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A103, max UDMA/33
[ 2.716254] ata4.00: configured for UDMA/33
[ 2.718670] scsi 2:0:0:0: Direct-Access ATA Maxtor 6L160P0 BAH4 PQ: 0 ANSI: 5
[ 2.718796] sd 2:0:0:0: [sdb] 320173056 512-byte hardware sectors: (163 GB/152 GiB)
[ 2.718815] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.718818] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.718845] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.718925] sd 2:0:0:0: [sdb] 320173056 512-byte hardware sectors: (163 GB/152 GiB)
[ 2.718940] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.718943] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.718970] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.718975] sdb: sdb1
[ 2.739203] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.739267] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.743055] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
[ 2.754858] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.754863] Uniform CD-ROM driver Revision: 3.20
[ 2.755006] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.755062] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 2.755243] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.755273] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.755303] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 2.755381] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 2.755449] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfd900000
[ 2.764018] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 2.764112] usb usb1: configuration #1 chosen from 1 choice
[ 2.764151] hub 1-0:1.0: USB hub found
[ 2.764163] hub 1-0:1.0: 8 ports detected
[ 2.764292] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.764320] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.764374] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.764385] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.764442] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.764467] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000dc00
[ 2.764555] usb usb2: configuration #1 chosen from 1 choice
[ 2.764583] hub 2-0:1.0: USB hub found
[ 2.764603] hub 2-0:1.0: 2 ports detected
[ 2.764698] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.764705] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.764752] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 2.764772] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000ec00
[ 2.764854] usb usb3: configuration #1 chosen from 1 choice
[ 2.764882] hub 3-0:1.0: USB hub found
[ 2.764892] hub 3-0:1.0: 2 ports detected
[ 2.764981] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.764987] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.765032] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 2.765051] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b000
[ 2.765142] usb usb4: configuration #1 chosen from 1 choice
[ 2.765170] hub 4-0:1.0: USB hub found
[ 2.765181] hub 4-0:1.0: 2 ports detected
[ 2.765273] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.765280] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2.765338] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 2.765358] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000b400
[ 2.765448] usb usb5: configuration #1 chosen from 1 choice
[ 2.765477] hub 5-0:1.0: USB hub found
[ 2.765488] hub 5-0:1.0: 2 ports detected
[ 2.765634] usbcore: registered new interface driver libusual
[ 2.765679] usbcore: registered new interface driver usbserial
[ 2.765692] USB Serial support registered for generic
[ 2.765709] usbcore: registered new interface driver usbserial_generic
[ 2.765712] usbserial: USB Serial Driver core
[ 2.765757] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.765759] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.765884] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.766020] mice: PS/2 mouse device common for all mice
[ 2.766186] rtc_cmos 00:02: RTC can wake from S4
[ 2.766233] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.766286] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 2.766375] device-mapper: uevent: version 1.0.3
[ 2.766517] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.766576] device-mapper: multipath: version 1.0.5 loaded
[ 2.766579] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.766701] EISA: Probing bus 0 at eisa.0
[ 2.766710] Cannot allocate resource for EISA slot 1
[ 2.766737] EISA: Detected 0 cards.
[ 2.766770] cpuidle: using governor ladder
[ 2.766772] cpuidle: using governor menu
[ 2.767375] TCP cubic registered
[ 2.767486] NET: Registered protocol family 10
[ 2.767933] lo: Disabled Privacy Extensions
[ 2.768312] NET: Registered protocol family 17
[ 2.768339] Bluetooth: L2CAP ver 2.11
[ 2.768341] Bluetooth: L2CAP socket layer initialized
[ 2.768344] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.768346] Bluetooth: SCO socket layer initialized
[ 2.768403] Bluetooth: RFCOMM socket layer initialized
[ 2.768415] Bluetooth: RFCOMM TTY layer initialized
[ 2.768417] Bluetooth: RFCOMM ver 1.10
[ 2.768457] powernow-k8: Power state transitions not supported
[ 2.768481] Using IPI No-Shortcut mode
[ 2.768590] registered taskstats version 1
[ 2.768751] Magic number: 13:193:954
[ 2.768855] rtc_cmos 00:02: setting system clock to 2009-06-01 21:55:40 UTC (1243893340)
[ 2.768859] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.768861] EDD information not available.
[ 2.769502] Freeing unused kernel memory: 532k freed
[ 2.769663] Write protecting the kernel text: 4128k
[ 2.769715] Write protecting the kernel read-only data: 1532k
[ 2.806808] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.324567] Floppy drive(s): fd0 is 1.44M
[ 3.344452] FDC 0 is a post-1991 82077
[ 3.376911] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 3.385871] ohci1394 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.437731] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fdb00000-fdb007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.459470] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 3.459475] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.465477] skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.465492] skge 0000:00:0a.0: PCI: Disallowing DAC for device
[ 3.465556] skge 1.13 addr 0xfdf00000 irq 17 chip Yukon-Lite rev 9
[ 3.466300] skge eth0: addr 00:11:d8:80:b8:e1
[ 3.466677] e100 0000:00:0d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.497916] e100: eth1: e100_probe: addr 0xfca00000, irq 18, MAC addr 00:a0:c9:86:e3:db
[ 3.585156] usb 4-1: configuration #1 chosen from 1 choice
[ 4.085917] usbcore: registered new interface driver hiddev
[ 4.100435] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/input/input5
[ 4.100906] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:10.2-1/input0
[ 4.100931] usbcore: registered new interface driver usbhid
[ 4.100935] usbhid: v2.6:USB HID core driver
[ 4.185844] PM: Starting manual resume from disk
[ 4.185851] PM: Resume from partition 8:5
[ 4.185853] PM: Checking hibernation image.
[ 4.186096] PM: Resume from disk failed.
[ 4.219343] kjournald starting. Commit interval 5 seconds
[ 4.219360] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.736159] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00004c0107002ede]
[ 9.707442] udev: starting version 141
[ 9.837666] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.876627] Linux agpgart interface v0.103
[ 9.880320] agpgart-amd64 0000:00:00.0: AGP bridge [1106/3188]
[ 9.884203] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 10.215585] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 10.785394] lp: driver loaded but no devices found
[ 10.945981] Adding 4554388k swap on /dev/sda5. Priority:-1 extents:1 across:4554388k
[ 11.499223] EXT3 FS on sda1, internal journal
[ 12.732596] type=1505 audit(1243886150.463:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1896
[ 12.807323] type=1505 audit(1243886150.535:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1900
[ 12.807549] type=1505 audit(1243886150.535:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1900
[ 12.807623] type=1505 audit(1243886150.535:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1900
[ 12.807686] type=1505 audit(1243886150.535:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1900
[ 13.007827] type=1505 audit(1243886150.735:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1905
[ 13.008154] type=1505 audit(1243886150.739:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1905
[ 13.051917] type=1505 audit(1243886150.779:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1909
[ 15.496995] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.497000] Bluetooth: BNEP filters: protocol multicast
[ 15.519770] Bridge firewalling registered
[ 16.545816] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.742875] [drm] Initialized drm 1.1.0 20060810
[ 16.845677] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 17.044031] ppdev: user-space parallel port driver
[ 17.129852] agpgart-amd64 0000:00:00.0: AGP 3.5 bridge
[ 17.129874] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 17.129951] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[ 17.459202] [drm] Setting GART location based on new memory map
[ 17.459212] [drm] Loading R200 Microcode
[ 17.459280] [drm] writeback test succeeded in 1 usecs
[ 21.285966] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.287219] skge eth0: enabling interface
[ 21.292099] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.084567] skge eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 23.084833] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 33.300029] eth0: no IPv6 routers present
jorgen@jorgen-desktop:~$

Nu går jag och lägger mig!

[krassegrand]

Reboot
if you have no sound, run dmesg and look for the string "snd_"

Menar han att om "snd_" saknas ska man "Manually Specify Module Parameters"? För jag hittar ine den i den där stora textmassan, inte ens innan jag minskade den.
Jag börjar på "Manually Specify Module Parameters" ikväll.

[Rune.K]

prova att installera alsa-oss, det löste mitt ljudprbolem i Debian Sid.

[krassegrand]

prova att installera alsa-oss, det löste mitt ljudprbolem i Debian Sid.

Gör man det med sudo install alsa-oss eller ska man använda lägg till program?

Jörgen

[krassegrand]

När jag följer instruktionerna nedan

* First you must find which model of sound card you use, so run this command:

cat /proc/asound/card0/codec#* | grep Codec

It will return model of your sound card(s), for example: "Codec: Realtek ALC260", so your sound card is ALC260.

* You should open a file in ALSA documentation. This file is here (replace KERNEL_VERSION with your kernel's version!):

Blir det så här!

jorgen@jorgen-desktop:~$ cat /proc/asound/card0/codec#* | grep Codec
cat: /proc/asound/card0/codec#*: Filen eller katalogen finns inte