Antar att det är något i menu.lst (?) som spökar.
Såhär ser allt ut:
Sata port 1: partitionerad. 50gb med win vista, och resten en vanlig ntfs.
Sata port 2: ntfs
Sata port 3: ntfs
Sata port 4: ntfs
IDE: Hårddisken jag installerat ubuntu. (tror den är master om de har någon betydelse.)
Jag förstår inte helt hur grub fungerar och vart den kollar men såhär ser menu.lst ut på ubuntu-hårddisken (finns den på vista-disken med? hittar ej.):
Kod: Markera allt
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=663127da-a69b-4f81-b6c8-3852d29a1ab4 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=663127da-a69b-4f81-b6c8-3852d29a1ab4
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid 663127da-a69b-4f81-b6c8-3852d29a1ab4
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=663127da-a69b-4f81-b6c8-3852d29a1ab4 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid 663127da-a69b-4f81-b6c8-3852d29a1ab4
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=663127da-a69b-4f81-b6c8-3852d29a1ab4 ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid 663127da-a69b-4f81-b6c8-3852d29a1ab4
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista (loader)
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1
Kod: Markera allt
============================= Boot Info Summary: ==============================
=> Grub0.97 is installed in the MBR of /dev/sda and looks on boot drive #5 in
partition #2 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Windows is installed in the MBR of /dev/sdb
=> No boot loader is installed in the MBR of /dev/sdc
=> Windows is installed in the MBR of /dev/sdd
=> Windows is installed in the MBR of /dev/sde
sda1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/grldr /wubildr.mbr
sda2: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdb1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdc1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdd1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sde1: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sde5: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sde2: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sde3: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xf2fdf2fd
Partition Boot Start End Size Id System
/dev/sda1 * 2,048 102,402,047 102,400,000 7 HPFS/NTFS
/dev/sda2 102,402,048 625,139,711 522,737,664 7 HPFS/NTFS
Drive: sdb ___________________ _____________________________________________________
Disk /dev/sdb: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xd0123598
Partition Boot Start End Size Id System
/dev/sdb1 63 488,392,064 488,392,002 7 HPFS/NTFS
Drive: sdc ___________________ _____________________________________________________
Disk /dev/sdc: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x470a470a
Partition Boot Start End Size Id System
/dev/sdc1 63 488,392,064 488,392,002 7 HPFS/NTFS
Drive: sdd ___________________ _____________________________________________________
Disk /dev/sdd: 164.6 GB, 164696555520 bytes
255 heads, 63 sectors/track, 20023 cylinders, total 321672960 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x05a0059f
Partition Boot Start End Size Id System
/dev/sdd1 63 321,669,494 321,669,432 7 HPFS/NTFS
Drive: sde ___________________ _____________________________________________________
Disk /dev/sde: 82.3 GB, 82348277760 bytes
255 heads, 63 sectors/track, 10011 cylinders, total 160836480 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xc59cc59c
Partition Boot Start End Size Id System
/dev/sde1 63 3,903,794 3,903,732 5 Extended
/dev/sde5 126 3,903,794 3,903,669 82 Linux swap / Solaris
/dev/sde2 3,903,795 42,973,874 39,070,080 83 Linux
/dev/sde3 42,973,875 160,826,714 117,852,840 83 Linux
blkid -c /dev/null: ____________________________________________________________
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="9C5859B358598D40" TYPE="ntfs"
/dev/sda2: UUID="5A52BAB752BA96EB" TYPE="ntfs"
/dev/sdb1: UUID="86A88B99A88B8681" TYPE="ntfs"
/dev/sdc1: UUID="706C1C0E6C1BCE2A" TYPE="ntfs"
/dev/sdd1: UUID="6EC8A4C7C8A48F41" TYPE="ntfs"
/dev/sde2: UUID="663127da-a69b-4f81-b6c8-3852d29a1ab4" SEC_TYPE="ext2" TYPE="ext3"
/dev/sde3: UUID="dbe223e3-c99d-4acd-b05f-7586080f8b0c" SEC_TYPE="ext2" TYPE="ext3"
/dev/sde5: TYPE="swap" UUID="8cc6af17-5738-4ceb-9f97-5fc8a27e6197"
=============================== "mount" output: ===============================
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=0755)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
rootfs on / type rootfs (rw)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
=========================== sde2/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=663127da-a69b-4f81-b6c8-3852d29a1ab4 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=663127da-a69b-4f81-b6c8-3852d29a1ab4
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid 663127da-a69b-4f81-b6c8-3852d29a1ab4
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=663127da-a69b-4f81-b6c8-3852d29a1ab4 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid 663127da-a69b-4f81-b6c8-3852d29a1ab4
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=663127da-a69b-4f81-b6c8-3852d29a1ab4 ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid 663127da-a69b-4f81-b6c8-3852d29a1ab4
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista (loader)
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1
=============================== sde2/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sde2 during installation
UUID=663127da-a69b-4f81-b6c8-3852d29a1ab4 / ext3 relatime,errors=remount-ro 0 1
# /home was on /dev/sde3 during installation
UUID=dbe223e3-c99d-4acd-b05f-7586080f8b0c /home ext3 relatime 0 2
# swap was on /dev/sde5 during installation
UUID=8cc6af17-5738-4ceb-9f97-5fc8a27e6197 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sde2: Location of files loaded by Grub: ===================
20.0GB: boot/grub/menu.lst
20.1GB: boot/grub/stage2
20.0GB: boot/initrd.img-2.6.28-11-generic
19.9GB: boot/vmlinuz-2.6.28-11-generic
20.0GB: initrd.img
19.9GB: vmlinuz