WLAN fungerade innan uppdatering.

[aengel]

Halloj!

Jag installerade nyligen en ren 8.10 från scratch mha wubi. När installationen var klar fungerade min trådlösa dongel (Netgear WG111v3) alldeles ypperligt. Jag angav WEP och kunde surfa direkt. Då sade ju självklart update manager till om att det fanns en massa som borde uppdateras, och det gjorde jag.

Rebootade sedan och nu funkar det inte.
Jag kan välja mitt nätverk i dropdown-listan, den säger att den ansluter men en "ping -c1 google.com" ger inget svar och firefox kommer ingen vart. Jag vet att det blev såhär förra gången också, men den installationen tvärdog efter att jag installerat de proprietära drivrutinerna för mitt Geforce GO. (Det vågar jag inte mig på igen).

Jag löste det den gången med en jäkla massa pysslande och forumlurkande, men jag känner att nog måste det finnas ett enkelt sätt att lösa det på? Jag menar, det fungerade ju innan uppdateringen.


Någon som har några idéer?
Tack.

[HenrikAn]

Först kan det vara bra att kolla vad som/om någon modul laddas.
Stoppa i kortet, vänta några minuter och kör sedan i en terminal:

Kod: Markera allt

dmesg

och

Kod: Markera allt

lsmod

Resultat?

Föresten, vill du slippa terminalen kan du testa denna: http://ubuntu-se.org/phpBB3/viewtopic.p ... 60#p287986
Välj Laddade moduler och dmesg

[aengel]

Tack för visat intresse!

Hujja, det blev rätt mycket text det där, som tur är chansade jag på att "dmesg > dmesg.txt" skulle funka, på samma sätt som i DOS, och tamejsatan det gjorde det

Ehm, det fick inte plats i ett inlägg, så här kommer två stycken med resultatet av dmesg och lsmod.

[aengel]

Jag fick plocka bort en hel del, så som CPU-info och sånt jag antar inte spelar någon jätteroll. Texten var 33766 tecken medan man bara får posta 20000...

dmesg:

Kod: Markera allt

[    0.000000] Linux version 2.6.27-11-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:24:39 UTC 2009 (Ubuntu 2.6.27-11.27-generic)
/........................................................../
[    0.564297] bus: 00 index 0 io port: [0, ffff]
[    0.564299] bus: 00 index 1 mmio: [0, ffffffff]
[    0.564301] bus: 01 index 0 io port: [4000, 4fff]
[    0.564304] bus: 01 index 1 mmio: [b4000000, b7ffffff]
[    0.564306] bus: 01 index 2 mmio: [d0000000, d01fffff]
[    0.564309] bus: 01 index 3 mmio: [0, 0]
[    0.564311] bus: 03 index 0 io port: [5000, 5fff]
[    0.564314] bus: 03 index 1 mmio: [b8000000, bbffffff]
[    0.564316] bus: 03 index 2 mmio: [d0200000, d03fffff]
[    0.564318] bus: 03 index 3 mmio: [0, 0]
[    0.564321] bus: 07 index 0 mmio: [0, 0]
[    0.564323] bus: 07 index 1 mmio: [0, 0]
[    0.564325] bus: 07 index 2 mmio: [0, 0]
[    0.564327] bus: 07 index 3 io port: [0, ffff]
[    0.564329] bus: 07 index 4 mmio: [0, ffffffff]
[    0.564340] NET: Registered protocol family 2
[    0.564472] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.564763] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.565470] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.565837] TCP: Hash tables configured (established 131072 bind 65536)
[    0.565840] TCP reno registered
[    0.565935] NET: Registered protocol family 1
[    0.566059] checking if image is initramfs... it is
[    1.366412] Freeing initrd memory: 8263k freed
[    1.366550] Simple Boot Flag at 0x36 set to 0x1
[    1.367094] audit: initializing netlink socket (disabled)
[    1.367110] type=2000 audit(1238015116.364:1): initialized
[    1.373668] highmem bounce pool size: 64 pages
[    1.373675] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.375815] VFS: Disk quotas dquot_6.5.1
[    1.375903] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.375997] msgmni has been set to 1762
[    1.376129] io scheduler noop registered
[    1.376132] io scheduler anticipatory registered
[    1.376134] io scheduler deadline registered
[    1.376147] io scheduler cfq registered (default)
[    1.376165] pci 0000:00:00.0: Enabling HT MSI Mapping
[    1.376202] pci 0000:00:02.0: Enabling HT MSI Mapping
[    1.376212] pci 0000:00:03.0: Enabling HT MSI Mapping
[    1.376222] pci 0000:00:05.0: Boot video device
[    1.376244] pci 0000:00:09.0: Enabling HT MSI Mapping
[    1.578848] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    1.578859] pci 0000:00:10.0: Enabling HT MSI Mapping
[    1.578872] pci 0000:00:10.1: Enabling HT MSI Mapping
[    1.578994] pcieport-driver 0000:00:02.0: setting latency timer to 64
[    1.579021] pcieport-driver 0000:00:02.0: found MSI capability
[    1.579042] pci_express 0000:00:02.0:pcie00: allocate port service
[    1.579082] pci_express 0000:00:02.0:pcie03: allocate port service
[    1.579148] pcieport-driver 0000:00:03.0: setting latency timer to 64
[    1.579173] pcieport-driver 0000:00:03.0: found MSI capability
[    1.579192] pci_express 0000:00:03.0:pcie00: allocate port service
[    1.579227] pci_express 0000:00:03.0:pcie03: allocate port service
[    1.579492] isapnp: Scanning for PnP cards...
[    1.932213] isapnp: No Plug & Play device found
[    1.968501] hpet_resources: 0xfed00000 is busy
[    1.968588] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.970686] brd: module loaded
[    1.970757] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.970877] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.985018] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.985024] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.985357] mice: PS/2 mouse device common for all mice
[    1.986373] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[    1.986406] rtc0: alarms up to one year, y3k, hpet irqs
[    1.986521] EISA: Probing bus 0 at eisa.0
[    1.986528] Cannot allocate resource for EISA slot 1
[    1.986531] Cannot allocate resource for EISA slot 2
[    1.986533] Cannot allocate resource for EISA slot 3
[    1.986536] Cannot allocate resource for EISA slot 4
[    1.986539] Cannot allocate resource for EISA slot 5
[    1.986549] EISA: Detected 0 cards.
[    1.986553] cpuidle: using governor ladder
[    1.986555] cpuidle: using governor menu
[    1.987060] TCP cubic registered
[    1.987087] Using IPI No-Shortcut mode
[    1.987269] registered taskstats version 1
[    1.987386]   Magic number: 1:601:96
[    1.987575] rtc_cmos 00:09: setting system clock to 2009-03-25 21:05:17 UTC (1238015117)
[    1.987579] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.987581] EDD information not available.
[    1.987838] Freeing unused kernel memory: 424k freed
[    1.987903] Write protecting the kernel text: 2580k
[    1.987942] Write protecting the kernel read-only data: 940k
[    2.002056] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    2.224046] fuse init (API version 7.9)
[    2.440586] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    2.440639] processor ACPI0007:00: registered as cooling_device0
[    2.443094] Marking TSC unstable due to TSC halts in idle
[    2.444102] thermal LNXTHERM:01: registered as thermal_zone0
[    2.446531] ACPI: Thermal Zone [THRM] (47 C)
[    3.453890] usbcore: registered new interface driver usbfs
[    3.453915] usbcore: registered new interface driver hub
[    3.464282] No dock devices found.
[    3.492220] usbcore: registered new device driver usb
[    3.504490] SCSI subsystem initialized
[    3.559673] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
[    3.559686] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, high) -> IRQ 23
[    3.559697] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[    3.559701] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[    3.559749] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[    3.559781] ehci_hcd 0000:00:0b.1: debug port 1
[    3.559786] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[    3.559806] ehci_hcd 0000:00:0b.1: irq 23, io mem 0xb0005000
[    3.568024] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.568204] usb usb1: configuration #1 chosen from 1 choice
[    3.568232] hub 1-0:1.0: USB hub found
[    3.568243] hub 1-0:1.0: 8 ports detected
[    3.580096] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.588625] libata version 3.00 loaded.
[    3.776823] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[    3.776836] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22
[    3.776849] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[    3.776853] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[    3.776879] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[    3.776905] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000
[    3.834422] usb usb2: configuration #1 chosen from 1 choice
[    3.834451] hub 2-0:1.0: USB hub found
[    3.834463] hub 2-0:1.0: 8 ports detected
[    3.888032] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    3.936312] sata_nv 0000:00:0e.0: version 3.5
[    3.936325] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007)
[    3.936761] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21
[    3.936773] sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 21 (level, high) -> IRQ 21
[    3.936777] sata_nv 0000:00:0e.0: Using SWNCQ mode
[    3.936823] sata_nv 0000:00:0e.0: setting latency timer to 64
[    3.937834] scsi0 : sata_nv
[    3.937939] scsi1 : sata_nv
[    3.938135] ata1: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 21
[    3.938139] ata2: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 21
[    4.027745] usb 1-2: configuration #1 chosen from 1 choice
[    4.404081] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.412243] ata1.00: ATA-7: ST9120822AS, 3.BHD, max UDMA/100
[    4.412247] ata1.00: 234441648 sectors, multi 16: LBA48 
[    4.428245] ata1.00: configured for UDMA/100
[    4.740134] scsi 0:0:0:0: Direct-Access     ATA      ST9120822AS      3.BH PQ: 0 ANSI: 5
[    4.740243] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[    4.740677] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[    4.740688] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20
[    4.740694] forcedeth 0000:00:14.0: setting latency timer to 64
[    4.740721] nv_probe: set workaround bit for reversed mac addr
[    5.260927] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:83:81:fc
[    5.260932] forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3
[    5.265406] pata_acpi 0000:00:0d.0: setting latency timer to 64
[    5.271243] pata_amd 0000:00:0d.0: version 0.3.10
[    5.271290] pata_amd 0000:00:0d.0: setting latency timer to 64
[    5.271977] scsi2 : pata_amd
[    5.272090] scsi3 : pata_amd
[    5.272903] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
[    5.272906] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
[    5.296508] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    5.311325] Driver 'sd' needs updating - please use bus_type methods
[    5.311427] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[    5.311444] sd 0:0:0:0: [sda] Write Protect is off
[    5.311447] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.311472] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.311534] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[    5.311548] sd 0:0:0:0: [sda] Write Protect is off
[    5.311551] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.311573] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.311577]  sda: sda1 < sda5 > sda2
[    5.330114] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.452342] ata3.00: ATAPI: TSSTcorp CDDVDW TS-L632H, HS02, max MWDMA2
[    5.452362] ata3: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
[    5.484292] ata3.00: configured for MWDMA2
[    5.484324] ata4: port disabled. ignoring.
[    5.488176] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L632H  HS02 PQ: 0 ANSI: 5
[    5.488354] scsi 2:0:0:0: Attached scsi generic sg1 type 5
[    5.526386] Driver 'sr' needs updating - please use bus_type methods
[    5.542606] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.542612] Uniform CD-ROM driver Revision: 3.20
[    5.542711] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    6.479399] loop: module loaded
[    6.544310] kjournald starting.  Commit interval 5 seconds
[    6.544325] EXT3-fs: mounted filesystem with ordered data mode.
[   13.241490] udevd version 124 started
[   14.074003] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   14.116223] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.320247] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   14.332031] ACPI: Power Button (FF) [PWRF]
[   14.332129] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[   14.348022] ACPI: Power Button (CM) [PWRB]
[   14.348145] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[   14.360027] ACPI: Sleep Button (CM) [SLPB]
[   14.360149] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[   14.360934] ACPI: Lid Switch [LID]
[   14.397414] ACPI: AC Adapter [ACAD] (on-line)
[   14.940818] ACPI: Battery Slot [BAT0] (battery present)
[   14.941379] ACPI: WMI: Mapper loaded
[   16.075993] acpi device:24: registered as cooling_device1
[   16.076261] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:22/input/input6
[   16.092025] ACPI: Video Device [UVGA] (multi-head: yes  rom: no  post: no)
[   16.444220] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[   16.444253] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
[   17.561679] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   17.793466] rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could damage your
[   17.793469]          hardware, use at your own risk
[   17.810253] phy0: Selected rate control algorithm 'pid'
[   18.116771] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 19
[   18.116784] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 19 (level, high) -> IRQ 19
[   18.116813] HDA Intel 0000:00:10.1: setting latency timer to 64
[   18.150795] phy0: hwaddr 00:1e:2a:41:55:8d, RTL8187BvE V0 + rtl8225z2
[   18.150817] usbcore: registered new interface driver rtl8187
[   18.315953] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[   18.372224] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   20.313612] lp: driver loaded but no devices found
[   21.062579] EXT3 FS on loop0, internal journal
[   32.317450] Adding 976552k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:976552k
[   32.678990] type=1505 audit(1238011548.517:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4092
[   32.904065] type=1505 audit(1238011548.745:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4097
[   32.904313] type=1505 audit(1238011548.745:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4097
[   33.075604] ip_tables: (C) 2000-2006 Netfilter Core Team
[   33.848366] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3500+ processors (1 cpu cores) (version 2.20.00)
[   33.848405] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x10
[   33.848408] powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x12
[   33.848411] powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x18
[   34.497111] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   34.543301] apm: BIOS not found.
[   34.691389] ppdev: user-space parallel port driver
[   35.500049] Clocksource tsc unstable (delta = -103003793 ns)
[   36.877591] Bluetooth: Core ver 2.13
[   36.878723] NET: Registered protocol family 31
[   36.878731] Bluetooth: HCI device and connection manager initialized
[   36.878740] Bluetooth: HCI socket layer initialized
[   36.921369] Bluetooth: L2CAP ver 2.11
[   36.921380] Bluetooth: L2CAP socket layer initialized
[   36.954110] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   36.954123] Bluetooth: BNEP filters: protocol multicast
[   36.982913] Bluetooth: RFCOMM socket layer initialized
[   36.984251] Bluetooth: RFCOMM TTY layer initialized
[   36.984261] Bluetooth: RFCOMM ver 1.10
[   37.061716] Bridge firewalling registered
[   37.081693] Bluetooth: SCO (Voice Link) ver 0.6
[   37.081706] Bluetooth: SCO socket layer initialized
[   41.188734] eth0: no link during initialization.
[   58.017941] NET: Registered protocol family 17
[   60.821249] wlan0: authenticate with AP 00:30:4f:51:d4:a5
[   60.823380] wlan0: authenticated
[   60.823391] wlan0: associate with AP 00:30:4f:51:d4:a5
[   60.825250] wlan0: RX AssocResp from 00:30:4f:51:d4:a5 (capab=0x1 status=0 aid=93)
[   60.825259] wlan0: associated
[   60.826257] wlan0: disassociating by local choice (reason=3)
[   82.990124] wlan0: authenticate with AP 00:01:38:92:95:55
[   82.993005] wlan0: authenticated
[   82.993016] wlan0: associate with AP 00:01:38:92:95:55
[   82.995262] wlan0: RX AssocResp from 00:01:38:92:95:55 (capab=0x471 status=0 aid=1)
[   82.995272] wlan0: associated
[   84.978922] NET: Registered protocol family 10
[   84.980066] lo: Disabled Privacy Extensions
[   84.981832] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   95.456052] wlan0: no IPv6 routers present

[aengel]

lsmod:

Kod: Markera allt

Module                  Size  Used by
ipv6                  263972  8 
af_packet              25728  4 
binfmt_misc            16904  1 
sco                    18308  2 
bridge                 56980  0 
stp                    10628  1 bridge
rfcomm                 44432  0 
bnep                   20480  2 
l2cap                  30464  6 rfcomm,bnep
bluetooth              61924  6 sco,rfcomm,bnep,l2cap
ppdev                  15620  0 
powernow_k8            22148  0 
cpufreq_userspace      11396  0 
cpufreq_conservative    14600  0 
cpufreq_powersave       9856  0 
cpufreq_stats          13188  0 
cpufreq_ondemand       14988  1 
freq_table             12672  3 powernow_k8,cpufreq_stats,cpufreq_ondemand
sbs                    19464  0 
sbshc                  13440  1 sbs
pci_slot               12680  0 
container              11520  0 
iptable_filter         10752  0 
ip_tables              19600  1 iptable_filter
x_tables               22916  1 ip_tables
parport_pc             39204  0 
lp                     17156  0 
parport                42604  3 ppdev,parport_pc,lp
joydev                 18368  0 
arc4                    9984  2 
ecb                    10880  2 
crypto_blkcipher       25476  1 ecb
snd_hda_intel         384176  2 
snd_pcm_oss            46848  0 
snd_mixer_oss          22784  1 snd_pcm_oss
snd_pcm                83204  2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy          10884  0 
psmouse                45200  0 
pcspkr                 10624  0 
snd_seq_oss            38528  0 
evdev                  17696  10 
snd_seq_midi           14336  0 
serio_raw              13444  0 
rtl8187                53248  0 
snd_rawmidi            29824  1 snd_seq_midi
mac80211              216820  1 rtl8187
eeprom_93cx6           10240  1 rtl8187
snd_seq_midi_event     15232  2 snd_seq_oss,snd_seq_midi
cfg80211               32392  2 rtl8187,mac80211
snd_seq                57776  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              29960  2 snd_pcm,snd_seq
snd_seq_device         15116  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    63268  13 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
k8temp                 12416  0 
soundcore              15328  1 snd
snd_page_alloc         16136  2 snd_hda_intel,snd_pcm
isp1760                26120  0 
i2c_nforce2            14468  0 
i2c_core               31892  1 i2c_nforce2
video                  25232  0 
output                 11008  1 video
wmi                    14504  0 
battery                18436  0 
ac                     12292  0 
button                 14224  0 
shpchp                 38036  0 
pci_hotplug            34976  1 shpchp
ext3                  133256  1 
jbd                    55828  1 ext3
mbcache                16004  1 ext3
loop                   23180  2 
sr_mod                 22212  0 
cdrom                  43168  1 sr_mod
sd_mod                 42392  2 
crc_t10dif              9984  1 sd_mod
sg                     39732  0 
pata_amd               18692  0 
pata_acpi              12160  0 
sata_nv                30600  1 
ata_generic            12932  0 
forcedeth              61328  0 
ohci_hcd               32016  0 
ehci_hcd               43788  0 
libata                178208  4 pata_amd,pata_acpi,sata_nv,ata_generic
scsi_mod              155212  4 sr_mod,sd_mod,sg,libata
dock                   16656  1 libata
usbcore               149360  5 rtl8187,isp1760,ohci_hcd,ehci_hcd
thermal                23708  0 
processor              42156  3 powernow_k8,thermal
fan                    12548  0 
fbcon                  47648  0 
tileblit               10880  1 fbcon
font                   16512  1 fbcon
bitblit                13824  1 fbcon
softcursor              9984  1 bitblit
fuse                   60828  5 

[HenrikAn]

Aha, rtl8187 verkar funka... sådär... Se https://bugs.launchpad.net/ubuntu/+sour ... mments=all

[aengel]

Hm, så vad som återstår är alltså i princip att försöka hitta den forumpost jag följde förra gången och göra om det?

Jag ska testa detta som stod í diskussionen för denna bug:

Kod: Markera allt

wget http://dl.aircrack-ng.org/drivers/rtl8187_linux_26.1010.zip
unzip rtl8187_linux_26.1010.zip
cd rtl8187_linux_26.1010.0622.2006/
wget http://patches.aircrack-ng.org/rtl8187_2.6.24v3.patch
tar xzf drv.tar.gz
tar xzf stack.tar.gz
patch -Np1 -i rtl8187_2.6.24v3.patch
Then I put rtl8187 to the blacklist - as root
Edit /etc/modprobe.d/blacklist and add “blacklist rtl8187” as a new line
Then remove the present driver
sudo ifconfig wlan0 down
sudo rmmod rtl8187
And then as root
make
make install
Then reboot and from new start, the network connection was OK, because the name wlan0 was not changed, it wasn't necessary to change the network settings.
My system is Ubuntu 8.04.1 64bit.

Förhoppningsvis ger det resultat.
[edit]Jäkla konstigt att det funkade innan uppdateringarn :/[/edit]