Problem med ett Via VT8623 [Apollo CLE266]

Grafikkort, TV-kort och webbkameror
Skriv svar
choel
Inlägg: 102
Blev medlem: 07 dec 2006, 02:26
Ort: grekland, mm...

Problem med ett Via VT8623 [Apollo CLE266]

Inlägg av choel »

Jag hostade precis igång en gammal burk jag hade ståendes med ett mini ITX kort i. Körde in Xubuntu 8.10 via ett usbminne vilket gick riktigt fint. Allt fungerar riktigt bra. Men har stött på ett problem som bara uppstår när jag kikar på en film eller liknande. Datorn låser sig fullståndigt efter en stund. Är allt från 5 min till en timme in i filmerna. Jag funderar på om det kan ha något med minnet att göra.
Sitter bara 500 MB minne i datorn.
Processorn är en 1 GHz.
Hittar inget uppenbart i loggarna.

Dettar är min lspci:

Kod: Markera allt

00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller (rev 80)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics (rev 03)
Här är min xorg.conf:

Kod: Markera allt

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Device"
	Identifier	"Configured Video Device"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
EndSection
Läste något om en framebuffert bug på VT8623 men kan lite för lite för att förstå innebörden.

Någon som kan tipsa om var jag ska börja felsöka.

/Joel
Upp
djkmmo
Inlägg: 1904
Blev medlem: 20 jun 2008, 18:09
OS: Ubuntu
Utgåva: 12.04 Precise Pangolin LTS
Ort: Malmö

Re: Problem med ett Via VT8623 [Apollo CLE266]

Inlägg av djkmmo »

Det är nog en fördel om du kande bifoga X.org-loggarna också, om du tror att det har med grafiken att göra. Annars finns ju loggarna i /var/log och det är väl kern.log och dmseg och messages som är värda att kolla först.
Upp
choel
Inlägg: 102
Blev medlem: 07 dec 2006, 02:26
Ort: grekland, mm...

Re: Problem med ett Via VT8623 [Apollo CLE266]

Inlägg av choel »

Detta är en del av Xorg.0.log Många upprepningar.

Kod: Markera allt


(II) CHROME(0): ViaValidMode: Validating 640x480 (25200)
(II) CHROME(0): ViaModePrimaryVGAValid
(II) CHROME(0): ViaComputeDotClock 25200 : 513c : c763
(II) CHROME(0): ViaValidMode: Validating 640x480 (31500)
(II) CHROME(0): ViaModePrimaryVGAValid
(II) CHROME(0): ViaComputeDotClock 31500 : c558 : 050b
(II) CHROME(0): ViaValidMode: Validating 640x480 (31500)
(II) CHROME(0): ViaModePrimaryVGAValid
(II) CHROME(0): ViaComputeDotClock 31500 : c558 : 050b
(II) CHROME(0): ViaValidMode: Validating 640x480 (25175)
(II) CHROME(0): ViaModePrimaryVGAValid
(II) CHROME(0): ViaComputeDotClock 25175 : 0000 : 0407
(II) CHROME(0): ViaValidMode: Validating 720x400 (28320)
(II) CHROME(0): ViaModePrimaryVGAValid
(II) CHROME(0): ViaComputeDotClock 28320 : 0000 : c65f
(--) CHROME(0): Virtual size is 1680x1050 (pitch 1680)
(**) CHROME(0): *Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(II) CHROME(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(**) CHROME(0): *Driver mode "1680x1050": 147.1 MHz (scaled from 0.0 MHz), 65.2 kHz, 60.0 Hz
(II) CHROME(0): Modeline "1680x1050"x60.0  147.14  1680 1784 1968 2256  1050 1051 1054 1087 -hsync +vsync (65.2 kHz)
(**) CHROME(0): *Default mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(II) CHROME(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(**) CHROME(0): *Default mode "1400x1050": 145.1 MHz (scaled from 0.0 MHz), 76.5 kHz, 70.0 Hz
(II) CHROME(0): Modeline "1400x1050"x70.0  145.06  1400 1496 1648 1896  1050 1051 1054 1093 -hsync +vsync (76.5 kHz)
(**) CHROME(0): *Default mode "1400x1050": 122.0 MHz (scaled from 0.0 MHz), 64.9 kHz, 60.0 Hz
(II) CHROME(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
(**) CHROME(0): *Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) CHROME(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) CHROME(0): *Driver mode "1280x1024": 108.9 MHz (scaled from 0.0 MHz), 63.6 kHz, 60.0 Hz
(II) CHROME(0): Modeline "1280x1024"x60.0  108.88  1280 1360 1496 1712  1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(**) CHROME(0): *Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) CHROME(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) CHROME(0): *Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) CHROME(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) CHROME(0): *Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
(II) CHROME(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) CHROME(0): *Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) CHROME(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) CHROME(0): *Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) CHROME(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(**) CHROME(0): *Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
(II) CHROME(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(**) CHROME(0): *Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) CHROME(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) CHROME(0): *Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) CHROME(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) CHROME(0): *Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) CHROME(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) CHROME(0): *Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
(II) CHROME(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) CHROME(0): *Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
(II) CHROME(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(**) CHROME(0): Display dimensions: (480, 300) mm
(**) CHROME(0): DPI set to (88, 88)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"

(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.2.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) CHROME(0): VIAUnmapMem
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) CHROME(0): VIAScreenInit
(II) CHROME(0): VIAMapFB
(--) CHROME(0): mapping framebuffer @ 0xd8000000 with size 0x2000000
(--) CHROME(0): Frame buffer start: 0xb5944000, free start: 0x6baa80 end: 0x2000000
(II) CHROME(0): VIAMapMMIO
(--) CHROME(0): mapping MMIO @ 0xdc000000 with size 0x9000
(--) CHROME(0): mapping BitBlt MMIO @ 0xdc200000 with size 0x20000
(II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) CHROME(0): VIASave
(II) CHROME(0): Primary
(II) CHROME(0): Crtc...
(II) CHROME(0): TVSave...
(II) CHROME(0): VT162xSave
(II) CHROME(0): VIAWriteMode
(II) CHROME(0): ViaModePrimary
(II) CHROME(0): ViaModePrimaryVGA
(II) CHROME(0): ViaModePrimaryVGA: Setting up 1680x1050
(II) CHROME(0): CrtcHTotal: 0x8C0
(II) CHROME(0): CrtcHDisplay: 0x690
(II) CHROME(0): CrtcHBlankStart: 0x690
(II) CHROME(0): CrtcHBlankEnd: 0x8C0
(II) CHROME(0): CrtcHSyncStart: 0x6F8
(II) CHROME(0): CrtcHSyncEnd: 0x7A8
(II) CHROME(0): CrtcVTotal: 0x441
(II) CHROME(0): CrtcVDisplay: 0x41A
(II) CHROME(0): CrtcVSyncStart: 0x41D
(II) CHROME(0): CrtcVSyncEnd: 0x423
(II) CHROME(0): CrtcVBlankStart: 0x41A
(II) CHROME(0): CrtcVBlankEnd: 0x441
(II) CHROME(0): Offset: 0x348
(II) CHROME(0): Fetch Count: 0x348
(II) CHROME(0): ViaComputeDotClock 146250 : 0000 : 0533
(II) CHROME(0): ViaTVPower: Off.
(II) CHROME(0): VT1622Power
(II) CHROME(0): ViaSetPrimaryFIFO
(II) CHROME(0): ViaSetPrimaryExpireNumber
(II) CHROME(0): ViaSetPrimaryDotclock to 0x000533
(II) CHROME(0): ViaSetUseExternalClock
(II) CHROME(0): VIAAdjustFrame
(II) CHROME(0): VIAAdjustFrame
(II) CHROME(0): - Blanked
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] loaded kernel module for "via" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) CHROME(0): [drm] Using the DRM lock SAREA also for drawables.
(II) CHROME(0): [drm] framebuffer handle = 0xd8000000
(II) CHROME(0): [drm] added 1 reserved context for kernel
(II) CHROME(0): X context handle = 0x1
(II) CHROME(0): [drm] installed DRM signal handler
(II) CHROME(0): [dri] visual configs initialized.
(II) CHROME(0): [drm] register handle = 0xdc000000
(II) CHROME(0): [drm] framebuffer handle = 0xd8000000
(II) CHROME(0): [drm] mmio Registers = 0xdc000000
(II) CHROME(0): [dri] mmio mapped.
(II) CHROME(0): - Visuals set up
(II) CHROME(0): VIAInternalScreenInit
(II) CHROME(0): - B & W
(II) CHROME(0): Using 1951 lines for offscreen memory.
(II) CHROME(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	8x8 color pattern filled rectangles
	Solid Lines
	Dashed Lines
	Image Writes
	Setting up tile and stipple cache:
		32 128x128 slots
		16 256x256 slots
		6 512x512 slots
		32 8x8 color pattern slots
(==) CHROME(0): Backing store disabled
(II) CHROME(0): - Backing store set up
(II) CHROME(0): - SW cursor set up
(II) CHROME(0): VIAHWCursorInit
(II) CHROME(0): - Def Color map set up
(II) CHROME(0): VIALoadPalette
(II) CHROME(0): VIALoadRgbLut
(II) CHROME(0): - Palette loaded
(II) CHROME(0): DPMS enabled
(II) CHROME(0): - DPMS set up
(II) CHROME(0): - Color maps etc. set up
(II) CHROME(0): [drm] Detected AGP vendor 0x1106, device 0x3123
(II) CHROME(0): [drm] Didn't find any AGP v3 compatible device. Trying AGP 4X mode.
(II) CHROME(0): [drm] Trying to enable AGP fast writes.
(II) CHROME(0): [drm] drmAgpEnabled succeeded
(II) CHROME(0): [drm] agpAddr = 0xd0000000
(II) CHROME(0): [drm] agpBase = (nil)
(II) CHROME(0): [drm] agpAddr = 0xd0000000
(II) CHROME(0): [drm] agpSize = 0x01e00000
(II) CHROME(0): [drm] agp physical addr = 0x00000000
(II) CHROME(0): [dri] Using AGP.
(WW) CHROME(0): [drm] The DRM heap and pixmap cache memory may be too
[drm] small for optimal performance. Please increase
[drm] the frame buffer memory area in the BIOS.
(II) CHROME(0): [drm] Using 13108000 bytes for DRM memory heap.
(II) CHROME(0): [dri] Frame buffer initialized.
(II) CHROME(0): [DRI] installation complete
(II) CHROME(0): [dri] Kernel data initialized.
(II) CHROME(0): [drm] IRQ handler installed, using IRQ 11.
(II) CHROME(0): [drm] Initialized AGP ring-buffer, size 0x200000 at AGP offset 0x1e00000.
(II) CHROME(0): direct rendering enabled
(II) CHROME(0): [Xv] Using PCI DMA for Xv image transfer.
Fulfilled via DRI at 20173440
(II) CHROME(0): Benchmarking video copy.  Less time is better.
(--) CHROME(0): Timed   libc YUV420 copy... 4057813. Throughput: 145.8 MiB/s.
(--) CHROME(0): Timed kernel YUV420 copy... 4038353. Throughput: 146.5 MiB/s.
(--) CHROME(0): Timed    SSE YUV420 copy... 2244681. Throughput: 263.5 MiB/s.
(--) CHROME(0): Timed    MMX YUV420 copy... 2950146. Throughput: 200.5 MiB/s.
(--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by CPU.
(--) CHROME(0): Timed   MMX2 YUV420 copy... 2570031. Throughput: 230.1 MiB/s.
Freed 20173440 (pool 2)
(--) CHROME(0): Using SSE YUV42X copy for video.
(II) CHROME(0): [XvMC] Registering chromeXvMC.
(II) CHROME(0): [XvMC] Initialized XvMC extension.
(II) CHROME(0): - Done
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: Loaded and initialized /usr/lib/dri/unichrome_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 2.0.99
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "se"
(**) AT Translated Set 2 keyboard: xkb_layout: "se"
(II) config/hal: Adding input device Logitech Optical USB Mouse
(**) Logitech Optical USB Mouse: always reports core events
(**) Logitech Optical USB Mouse: Device: "/dev/input/event2"
(II) Logitech Optical USB Mouse: Found x and y relative axes
(II) Logitech Optical USB Mouse: Found 3 mouse buttons
(II) Logitech Optical USB Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
AUDIT: Sun Mar  8 19:09:58 2009: 4736 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5115 )
AUDIT: Sun Mar  8 19:09:58 2009: 4736 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5116 )
AUDIT: Sun Mar  8 19:09:58 2009: 4736 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5117 )
(II) CHROME(0): VIALoadPalette
(II) CHROME(0): VIALoadRgbLut
Upp
djkmmo
Inlägg: 1904
Blev medlem: 20 jun 2008, 18:09
OS: Ubuntu
Utgåva: 12.04 Precise Pangolin LTS
Ort: Malmö

Re: Problem med ett Via VT8623 [Apollo CLE266]

Inlägg av djkmmo »

Nej jag går nog bet på det, tyvärr. Det enda jag kunnat hitta är att lägga till följande i xorg.conf

Kod: Markera allt

Section "Module"
    Disable "glx"
    Disable "xtrap"
    Disable "record"
    Disable "GLcore"
    Disable "dri"
EndSection
Det löste liknande problem i 8.04. Det kan ju vara värt att prova iaf.

Hämtat från: https://bugs.launchpad.net/ubuntu/+sour ... bug/247071
Upp
choel
Inlägg: 102
Blev medlem: 07 dec 2006, 02:26
Ort: grekland, mm...

Re: Problem med ett Via VT8623 [Apollo CLE266]

Inlägg av choel »

Tackar, det är löst.
La in

Kod: Markera allt

Section "Module"
    Disable "glx"
    Disable "xtrap"
    Disable "record"
    Disable "GLcore"
    Disable "dri"
EndSection
i min xorg.conf.
Har nu hunnit testa det lite å det verkar fungera.
Tackar.
Upp
Skriv svar

Återgå till "Bild"