min dator låser sig!? :(

[jenssi]

installerade programmet OGMrip, men varje gång jag försöker rippa en dvd så låser sig datorn.
vad är det som är fel??

[Sid]

Ger kommandot

Kod: Markera allt

dmesg

något matnyttigt?

[jenssi]

Kod: Markera allt

[   21.820622] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   21.820641] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   21.820693] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   21.820703] sd 2:0:0:0: [sda] Write Protect is off
[   21.820706] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   21.820721] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   21.820725]  sda: sda1 sda2 sda3
[   21.841867] sd 2:0:0:0: [sda] Attached SCSI disk
[   21.965298] usb 1-6: configuration #1 chosen from 1 choice
[   21.969408] usbcore: registered new interface driver hiddev
[   21.974373] input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/input/input2
[   21.994251] input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:0b.0-1
[   21.994276] usbcore: registered new interface driver usbhid
[   21.994280] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   22.140750] Attempting manual resume
[   22.140755] swsusp: Resume From Partition 8:2
[   22.140757] PM: Checking swsusp image.
[   22.140963] PM: Resume from disk failed.
[   22.181790] kjournald starting.  Commit interval 5 seconds
[   22.181809] EXT3-fs: mounted filesystem with ordered data mode.
[   30.912957] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   30.945078] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
[   30.945112] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
[   31.001294] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   31.459357] input: Power Button (FF) as /devices/virtual/input/input3
[   31.472466] ACPI: Power Button (FF) [PWRF]
[   31.472628] input: Sleep Button (CM) as /devices/virtual/input/input4
[   31.504439] ACPI: Sleep Button (CM) [SLPB]
[   31.504535] input: Lid Switch as /devices/virtual/input/input5
[   31.505168] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   31.541298] ACPI: Lid Switch [LID]
[   31.541386] input: Power Button (CM) as /devices/virtual/input/input6
[   31.568739] ACPI: Power Button (CM) [PWRB]
[   31.692964] asus-laptop: Asus Laptop Support version 0.42
[   31.693221] asus-laptop:   F3T model detected
[   31.711227] Registered led device: asus:mail
[   32.118873] ACPI: WMI-Acer: Mapper loaded
[   32.137638] ACPI: AC Adapter [AC0] (on-line)
[   32.568854] ACPI: Battery Slot [BAT0] (battery present)
[   32.608010] ath_hal: module license 'Proprietary' taints kernel.
[   32.610303] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:05/LNXVIDEO:00/input/input7
[   32.628329] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[   32.636270] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   32.737132] wlan: 0.9.4
[   32.877964] ath_pci: 0.9.4
[   32.878509] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[   32.878521] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 20
[   32.878531] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   33.356251] ricoh-mmc: Ricoh MMC Controller disabling driver
[   33.356256] ricoh-mmc: Copyright(c) Philip Langdale
[   33.452794] Linux agpgart interface v0.102
[   33.552369] Bluetooth: Core ver 2.11
[   33.604503] sdhci: Secure Digital Host Controller Interface driver
[   33.604508] sdhci: Copyright(c) Pierre Ossman
[   33.613194] NET: Registered protocol family 31
[   33.613199] Bluetooth: HCI device and connection manager initialized
[   33.613204] Bluetooth: HCI socket layer initialized
[   33.676861] Linux video capture interface: v2.00
[   33.705638] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   33.764527] Bluetooth: HCI USB driver ver 2.9
[   33.767853] usbcore: registered new interface driver hci_usb
[   33.792531] stk11xx: Syntek USB2.0 webcam driver startup
[   33.792563] stk11xx: Syntek USB2.0 - STK-1135 based webcam found.
[   33.792566] stk11xx: Syntek AVStream USB2.0 1.3M WebCam - Product ID 0x0501.
[   33.792569] stk11xx: Release: 0005
[   33.792571] stk11xx: Number of interfaces : 1
[   33.793660] stk11xx: Initialize USB2.0 Syntek Camera
[   34.255480] stk11xx: Syntek USB2.0 Camera is ready
[   34.255531] stk11xx: Syntek USB2.0 Camera is now controlling video device /dev/video0
[   34.255563] usbcore: registered new interface driver usb_stk11xx_driver
[   34.255568] stk11xx: v1.3.1 : Syntek USB Video Camera
[   34.364533] ath_rate_sample: 1.2 (0.9.4)
[   34.365097] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[   34.365103] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[   34.365113] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[   34.365118] wifi0: mac 10.0 phy 6.1 radio 10.2
[   34.365122] wifi0: Use hw queue 1 for WME_AC_BE traffic
[   34.365124] wifi0: Use hw queue 0 for WME_AC_BK traffic
[   34.365127] wifi0: Use hw queue 2 for WME_AC_VI traffic
[   34.365129] wifi0: Use hw queue 3 for WME_AC_VO traffic
[   34.365131] wifi0: Use hw queue 8 for CAB traffic
[   34.365133] wifi0: Use hw queue 9 for beacons
[   34.385047] wifi0: Atheros 5424/2424: mem=0xdc7f0000, irq=20
[   34.386137] ricoh-mmc: Ricoh MMC controller found at 0000:05:01.2 [1180:0843] (rev 1)
[   34.386148] ricoh-mmc: Controller is now disabled.
[   34.387107] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[   34.387121] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNEA] -> GSI 18 (level, low) -> IRQ 21
[   34.387131] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   34.387103] sdhci: SDHCI controller found at 0000:05:01.1 [1180:0822] (rev 19)
[   34.387596] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
[   34.387610] ACPI: PCI Interrupt 0000:05:01.1[B] -> Link [LNKB] -> GSI 17 (level, low) -> IRQ 22
[   34.387628] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[   34.387696] mmc0: SDHCI at 0xdffff400 irq 22 DMA
[   34.396557] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
[   34.398765] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[   34.398780] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 23
[   34.398813] PCI: Setting latency timer of device 0000:00:10.1 to 64
[   34.622880] input: PS/2 Mouse as /devices/virtual/input/input9
[   34.685340] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input10
[   36.184737] lp: driver loaded but no devices found
[   36.341080] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 across:1951888k
[   36.905527] EXT3 FS on sda1, internal journal
[   37.815531] kjournald starting.  Commit interval 5 seconds
[   37.816080] EXT3 FS on sda3, internal journal
[   37.816087] EXT3-fs: mounted filesystem with ordered data mode.
[   38.463557] ip_tables: (C) 2000-2006 Netfilter Core Team
[   39.092179] No dock devices found.
[   39.460508] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (2 cpu cores) (version 2.20.00)
[   39.460228] powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x13
[   39.460233] powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e
[   42.160869] ppdev: user-space parallel port driver
[   42.397840] audit(1209748626.328:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5508 profile="/usr/sbin/cupsd" namespace="default"
[   42.431835] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   42.431843] apm: disabled - APM is not SMP safe.
[   43.688999] Bluetooth: L2CAP ver 2.9
[   43.689004] Bluetooth: L2CAP socket layer initialized
[   43.694992] Bluetooth: RFCOMM socket layer initialized
[   43.695584] Bluetooth: RFCOMM TTY layer initialized
[   43.695587] Bluetooth: RFCOMM ver 1.8
[   45.218597] Clocksource tsc unstable (delta = -250019068 ns)
[   47.391838] NET: Registered protocol family 17
[   52.294094] NET: Registered protocol family 10
[   52.294388] lo: Disabled Privacy Extensions
[   57.437476] ath0: no IPv6 routers present
[   58.285307] eth0: no IPv6 routers present
[   60.287963] CPU0 attaching NULL sched-domain.
[   60.287972] CPU1 attaching NULL sched-domain.
[   60.309790] CPU0 attaching sched-domain:
[   60.309797]  domain 0: span 03
[   60.309800]   groups: 01 02
[   60.309804] CPU1 attaching sched-domain:
[   60.309806]  domain 0: span 03
[   60.309808]   groups: 02 01
[ 1051.543466] ata2.00: qc timeout (cmd 0xa0)
[ 1051.543481] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 1051.543493] ata2.00: cmd a0/00:00:00:0c:00/00:00:00:00:00/a0 tag 0 pio 12 in
[ 1051.543495]          cdb 43 00 00 00 00 00 00 00  0c 40 00 00 00 00 00 00
[ 1051.543496]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 1051.543500] ata2.00: status: { DRDY ERR }
[ 1056.567178] ata2: port is slow to respond, please be patient (Status 0xd0)
[ 1061.562946] ata2: device not ready (errno=-16), forcing hardreset
[ 1061.562954] ata2: soft resetting link
[ 1062.099241] ata2.00: configured for UDMA/33
[ 1062.099268] ata2: EH complete
[ 1279.286224] ata2.00: qc timeout (cmd 0xa0)
[ 1279.286236] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 1279.286246] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 1279.286248]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[ 1279.286249]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 1279.286254] ata2.00: status: { DRDY ERR }
[ 1281.803630] ata2: port is slow to respond, please be patient (Status 0xd1)
[ 1284.297056] ata2: device not ready (errno=-16), forcing hardreset
[ 1284.297063] ata2: soft resetting link
[ 1284.575163] ata2.00: configured for UDMA/33
[ 1284.575183] ata2: EH complete
[ 1538.384995] ata2.00: qc timeout (cmd 0xa0)
[ 1538.385007] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 1538.385053] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 1538.385055]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[ 1538.385056]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 1538.385061] ata2.00: status: { DRDY ERR }
[ 1540.896523] ata2: port is slow to respond, please be patient (Status 0xd1)
[ 1545.248482] ata2: device not ready (errno=-16), forcing hardreset
[ 1545.248492] ata2: soft resetting link
[ 1545.510598] ata2.00: configured for UDMA/33
[ 1545.510627] ata2: EH complete
[ 1948.372556] ata2.00: qc timeout (cmd 0xa0)
[ 1948.372568] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 1948.372579] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 8 in
[ 1948.372581]          cdb 25 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[ 1948.372582]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 1948.372586] ata2.00: status: { DRDY ERR }
[ 1950.875948] ata2: port is slow to respond, please be patient (Status 0xd1)
[ 1953.383353] ata2: device not ready (errno=-16), forcing hardreset
[ 1953.383360] ata2: soft resetting link
[ 1953.661460] ata2.00: configured for UDMA/33
[ 1953.661480] ata2: EH complete
[ 3628.358251] ata2.00: qc timeout (cmd 0xa0)
[ 3628.358263] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 3628.358274] ata2.00: cmd a0/00:00:00:0c:00/00:00:00:00:00/a0 tag 0 pio 12 in
[ 3628.358276]          cdb 43 00 00 00 00 00 00 00  0c 00 00 00 00 00 00 00
[ 3628.358278]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 3628.358281] ata2.00: status: { DRDY ERR }
[ 3630.881728] ata2: port is slow to respond, please be patient (Status 0xd1)
[ 3634.624113] ata2: device not ready (errno=-16), forcing hardreset
[ 3634.624120] ata2: soft resetting link
[ 3634.902216] ata2.00: configured for UDMA/33
[ 3634.902239] ata2: EH complete
[ 3918.658308] ata2.00: qc timeout (cmd 0xa0)
[ 3918.658320] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 3918.658331] ata2.00: cmd a0/00:00:00:0c:00/00:00:00:00:00/a0 tag 0 pio 12 in
[ 3918.658333]          cdb 43 00 00 00 00 00 00 00  0c 40 00 00 00 00 00 00
[ 3918.658335]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 3918.658339] ata2.00: status: { DRDY ERR }
[ 3921.171645] ata2: port is slow to respond, please be patient (Status 0xd1)
[ 3923.667068] ata2: device not ready (errno=-16), forcing hardreset
[ 3923.667076] ata2: soft resetting link
[ 3923.937182] ata2.00: configured for UDMA/33
[ 3923.937207] ata2: EH complete
[ 4245.717935] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 4245.717950] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 8 in
[ 4245.717952]          cdb 25 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[ 4245.717953]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 4245.717958] ata2.00: status: { DRDY ERR }
[ 5829.516310] ata2.00: qc timeout (cmd 0xa0)
[ 5829.516322] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 5829.516333] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 5829.516335]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[ 5829.516337]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 5829.516340] ata2.00: status: { DRDY ERR }
[ 5832.023708] ata2: port is slow to respond, please be patient (Status 0xd1)
[ 5834.523137] ata2: device not ready (errno=-16), forcing hardreset
[ 5834.523145] ata2: soft resetting link
[ 5834.791257] ata2.00: configured for UDMA/33
[ 5834.791282] ata2: EH complete
[ 6761.741936] ata2.00: qc timeout (cmd 0xa0)
[ 6761.741949] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 6761.741960] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 8 in
[ 6761.741962]          cdb 25 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[ 6761.741964]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 6761.741967] ata2.00: status: { DRDY ERR }
[ 6764.259337] ata2: port is slow to respond, please be patient (Status 0xd1)
[ 6766.756761] ata2: device not ready (errno=-16), forcing hardreset
[ 6766.756768] ata2: soft resetting link
[ 6767.026868] ata2.00: configured for UDMA/33
[ 6767.026893] ata2: EH complete
[ 6910.187496] ata2.00: qc timeout (cmd 0xa0)
[ 6910.187509] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 6910.187521] ata2.00: cmd a0/00:00:00:0c:00/00:00:00:00:00/a0 tag 0 pio 12 in
[ 6910.187523]          cdb 43 00 00 00 00 00 00 00  0c 00 00 00 00 00 00 00
[ 6910.187524]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 6910.187528] ata2.00: status: { DRDY ERR }
[ 6912.707416] ata2: port is slow to respond, please be patient (Status 0xd0)
[ 6915.198837] ata2: device not ready (errno=-16), forcing hardreset
[ 6915.198846] ata2: soft resetting link
[ 6915.460955] ata2.00: configured for UDMA/33
[ 6915.460986] ata2: EH complete
[ 7410.533554] ata2.00: qc timeout (cmd 0xa0)
[ 7410.533567] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 7410.533577] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 7410.533579]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[ 7410.533581]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 7410.533600] ata2.00: status: { DRDY ERR }
[ 7413.062931] ata2: port is slow to respond, please be patient (Status 0xd1)
[ 7415.538353] ata2: device not ready (errno=-16), forcing hardreset
[ 7415.538361] ata2: soft resetting link
[ 7415.804472] ata2.00: configured for UDMA/33
[ 7415.804496] ata2: EH complete
[ 7734.956287] ata2.00: qc timeout (cmd 0xa0)
[ 7734.956301] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 7734.956312] ata2.00: cmd a0/00:00:00:0c:00/00:00:00:00:00/a0 tag 0 pio 12 in
[ 7734.956314]          cdb 43 00 00 00 00 00 00 00  0c 40 00 00 00 00 00 00
[ 7734.956316]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 7734.956319] ata2.00: status: { DRDY ERR }
[ 7737.457700] ata2: port is slow to respond, please be patient (Status 0xd0)
[ 7739.965120] ata2: device not ready (errno=-16), forcing hardreset
[ 7739.965127] ata2: soft resetting link
[ 7740.235225] ata2.00: configured for UDMA/33
[ 7740.235250] ata2: EH complete
[ 7995.375880] ata2.00: qc timeout (cmd 0xa0)
[ 7995.375892] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 7995.375903] ata2.00: cmd a0/00:00:00:0c:00/00:00:00:00:00/a0 tag 0 pio 12 in
[ 7995.375905]          cdb 43 00 00 00 00 00 00 00  0c 40 00 00 00 00 00 00
[ 7995.375907]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 7995.375911] ata2.00: status: { DRDY ERR }
[ 7997.901234] ata2: port is slow to respond, please be patient (Status 0xd0)
[ 8000.390651] ata2: device not ready (errno=-16), forcing hardreset
[ 8000.390659] ata2: soft resetting link
[ 8000.658776] ata2.00: configured for UDMA/33
[ 8000.658802] ata2: EH complete
[ 8607.699880] ata2.00: qc timeout (cmd 0xa0)
[ 8607.699893] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 8607.699904] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 8607.699906]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[ 8607.699907]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 8607.699912] ata2.00: status: { DRDY ERR }
[ 8610.211230] ata2: port is slow to respond, please be patient (Status 0xd0)
[ 8612.718647] ata2: device not ready (errno=-16), forcing hardreset
[ 8612.718654] ata2: soft resetting link
[ 8612.990763] ata2.00: configured for UDMA/33
[ 8612.990788] ata2: EH complete
[ 9490.003441] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 9490.003456] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 9490.003458]          cdb 1e 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[ 9490.003459]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)

[jenssi]

fortsättning:

Kod: Markera allt

[ 9490.003463] ata2.00: status: { DRDY }
[ 9492.510833] ata2: port is slow to respond, please be patient (Status 0xd0)
[ 9495.020251] ata2: device not ready (errno=-16), forcing hardreset
[ 9495.020258] ata2: soft resetting link
[ 9495.292379] ata2.00: configured for UDMA/33
[ 9495.292397] ata2: EH complete
[11229.977683] ata2.00: qc timeout (cmd 0xa0)
[11229.977696] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[11229.977707] ata2.00: cmd a0/00:00:00:0c:00/00:00:00:00:00/a0 tag 0 pio 12 in
[11229.977709]          cdb 43 00 00 00 00 00 00 00  0c 00 00 00 00 00 00 00
[11229.977711]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[11229.977715] ata2.00: status: { DRDY ERR }
[11232.493017] ata2: port is slow to respond, please be patient (Status 0xd1)
[11234.992433] ata2: device not ready (errno=-16), forcing hardreset
[11234.992440] ata2: soft resetting link
[11235.262563] ata2.00: configured for UDMA/33
[11235.262589] ata2: EH complete
[13929.751719] ata2.00: qc timeout (cmd 0xa0)
[13929.751731] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[13929.751743] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[13929.751744]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[13929.751746]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[13929.751749] ata2.00: status: { DRDY ERR }
[13932.273111] ata2: port is slow to respond, please be patient (Status 0xd1)
[13934.754541] ata2: device not ready (errno=-16), forcing hardreset
[13934.754548] ata2: soft resetting link
[13935.026659] ata2.00: configured for UDMA/33
[13935.026685] ata2: EH complete
[15837.693094] ata2.00: qc timeout (cmd 0xa0)
[15837.693106] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[15837.693118] ata2.00: cmd a0/00:00:00:0c:00/00:00:00:00:00/a0 tag 0 pio 12 in
[15837.693119]          cdb 43 00 00 00 00 00 00 00  0c 40 00 00 00 00 00 00
[15837.693121]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[15837.693125] ata2.00: status: { DRDY ERR }
[15840.200444] ata2: port is slow to respond, please be patient (Status 0xd0)
[15842.693870] ata2: device not ready (errno=-16), forcing hardreset
[15842.693877] ata2: soft resetting link
[15842.961992] ata2.00: configured for UDMA/33
[15842.962018] ata2: EH complete
[17369.777650] ata2.00: qc timeout (cmd 0xa0)
[17369.777662] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[17369.777673] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 8 in
[17369.777675]          cdb 25 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[17369.777677]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[17369.777680] ata2.00: status: { DRDY ERR }
[17372.293052] ata2: port is slow to respond, please be patient (Status 0xd0)
[17374.780490] ata2: device not ready (errno=-16), forcing hardreset
[17374.780497] ata2: soft resetting link
[17375.048596] ata2.00: configured for UDMA/33
[17375.048620] ata2: EH complete
[18805.898602] ata2.00: qc timeout (cmd 0xa0)
[18805.898614] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[18805.898624] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[18805.898626]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[18805.898628]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[18805.898632] ata2.00: status: { DRDY ERR }
[18808.406005] ata2: port is slow to respond, please be patient (Status 0xd1)
[18810.899426] ata2: device not ready (errno=-16), forcing hardreset
[18810.899434] ata2: soft resetting link
[18811.175539] ata2.00: configured for UDMA/33
[18811.175566] ata2: EH complete
[19546.145062] ata2.00: qc timeout (cmd 0xa0)
[19546.145075] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[19546.145086] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[19546.145088]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[19546.145089]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[19546.145093] ata2.00: status: { DRDY ERR }
[19548.650463] ata2: port is slow to respond, please be patient (Status 0xd1)
[19551.171882] ata2: device not ready (errno=-16), forcing hardreset
[19551.171890] ata2: soft resetting link
[19551.442010] ata2.00: configured for UDMA/33
[19551.442037] ata2: EH complete
[21822.037554] ata2.00: qc timeout (cmd 0xa0)
[21822.037567] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[21822.037578] ata2.00: cmd a0/00:00:00:0c:00/00:00:00:00:00/a0 tag 0 pio 12 in
[21822.037580]          cdb 43 00 00 00 00 00 00 00  0c 00 00 00 00 00 00 00
[21822.037581]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[21822.037585] ata2.00: status: { DRDY ERR }
[21824.560964] ata2: port is slow to respond, please be patient (Status 0xd0)
[21827.056395] ata2: device not ready (errno=-16), forcing hardreset
[21827.056402] ata2: soft resetting link
[21827.330500] ata2.00: configured for UDMA/33
[21827.330527] ata2: EH complete
[22035.710020] ata2.00: qc timeout (cmd 0xa0)
[22035.710032] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[22035.710043] ata2.00: cmd a0/00:00:00:0c:00/00:00:00:00:00/a0 tag 0 pio 12 in
[22035.710045]          cdb 43 00 00 00 00 00 00 00  0c 00 00 00 00 00 00 00
[22035.710046]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[22035.710050] ata2.00: status: { DRDY ERR }
[22038.221422] ata2: port is slow to respond, please be patient (Status 0xd0)
[22040.710856] ata2: device not ready (errno=-16), forcing hardreset
[22040.710864] ata2: soft resetting link
[22040.980967] ata2.00: configured for UDMA/33
[22040.980993] ata2: EH complete
[26854.142460] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[26854.142475] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 8 in
[26854.142477]          cdb 25 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[26854.142478]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[26854.142482] ata2.00: status: { DRDY }
[26856.643874] ata2: port is slow to respond, please be patient (Status 0xd0)
[26859.163326] ata2: device not ready (errno=-16), forcing hardreset
[26859.163333] ata2: soft resetting link
[26859.439438] ata2.00: configured for UDMA/33
[26859.439456] ata2: EH complete
[27076.569547] ata2.00: qc timeout (cmd 0xa0)
[27076.569558] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[27076.569570] ata2.00: cmd a0/00:00:00:0c:00/00:00:00:00:00/a0 tag 0 pio 12 in
[27076.569572]          cdb 43 00 00 00 00 00 00 00  0c 40 00 00 00 00 00 00
[27076.569574]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[27076.569577] ata2.00: status: { DRDY ERR }
[27079.072922] ata2: port is slow to respond, please be patient (Status 0xd0)
[27081.588367] ata2: device not ready (errno=-16), forcing hardreset
[27081.588375] ata2: soft resetting link
[27081.864477] ata2.00: configured for UDMA/33
[27081.864498] ata2: EH complete
[27463.568740] NVRM: Xid (0004:00): 6, PE0000 0200 05000000 0000e2bc 00e0e0e0 00000000
[27463.579623] NVRM: Xid (0004:00): 36,  L0 -> L0
[27880.334798] ata2.00: qc timeout (cmd 0xa0)
[27880.334812] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[27880.334823] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[27880.334825]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[27880.334827]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[27880.334831] ata2.00: status: { DRDY ERR }
[27882.862153] ata2: port is slow to respond, please be patient (Status 0xd1)
[27885.337630] ata2: device not ready (errno=-16), forcing hardreset
[27885.337640] ata2: soft resetting link
[27885.609803] ata2.00: configured for UDMA/33
[27885.609833] ata2: EH complete
[28548.954862] ata2.00: qc timeout (cmd 0xa0)
[28548.954876] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[28548.954888] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 8 in
[28548.954890]          cdb 25 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[28548.954892]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[28548.954896] ata2.00: status: { DRDY ERR }
[28551.464208] ata2: port is slow to respond, please be patient (Status 0xd0)
[28553.979618] ata2: device not ready (errno=-16), forcing hardreset
[28553.979627] ata2: soft resetting link
[28554.255743] ata2.00: configured for UDMA/33
[28554.255772] ata2: EH complete
[29326.559716] ata2.00: qc timeout (cmd 0xa0)
[29326.559730] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[29326.559741] ata2.00: cmd a0/00:00:00:0c:00/00:00:00:00:00/a0 tag 0 pio 12 in
[29326.559743]          cdb 43 00 00 00 00 00 00 00  0c 00 00 00 00 00 00 00
[29326.559745]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[29326.559749] ata2.00: status: { DRDY ERR }
[29329.067371] ata2: port is slow to respond, please be patient (Status 0xd0)
[29331.586779] ata2: device not ready (errno=-16), forcing hardreset
[29331.586786] ata2: soft resetting link
[29331.848904] ata2.00: configured for UDMA/33
[29331.848928] ata2: EH complete
[29404.674330] ata2.00: qc timeout (cmd 0xa0)
[29404.674344] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[29404.674355] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[29404.674357]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[29404.674359]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[29404.674363] ata2.00: status: { DRDY ERR }
[29407.201723] ata2: port is slow to respond, please be patient (Status 0xd1)
[29411.546192] ata2: device not ready (errno=-16), forcing hardreset
[29411.546201] ata2: soft resetting link
[29412.083141] ata2.00: configured for UDMA/33
[29412.083171] ata2: EH complete
jens@jens-laptop:~$

[Hund]

Jag la allt text i kodboxar så inte inläggen blev gigantiska.

[jenssi]

ok, tack

[jenssi]

någon som vet vad felet kan vara??