Jag kör för närvarande Ubuntu 7.1 på en gammal Pentium 2 som reserv tills grafiken i min laptop har lagats. Allt går bra fast långsamt. Däremot när jag ska starta Ubuntu så går allt ok tills Ubuntuloggan kommer fram då stannar förloppsindikatorn 1mm lång och där står den. Stänger av datorn och startar igen och då går allt som det ska. Har installerat om Grubben. När jag stänger av så stängs hårddisken av men Ubuntuloggan ligger kvar på skärmen och nätaggregatet går så jag måste stänga av manuellt. Någon som har lösningen?
N-E
Startproblem med Ubuntu 7.1
Kategoriregler
I detta forum diskuterar vi frågor relaterade till fysisk hårdvara.
Ubunturelaterade frågor ska ställas i Hårdvara
I detta forum diskuterar vi frågor relaterade till fysisk hårdvara.
Ubunturelaterade frågor ska ställas i Hårdvara
SV: Startproblem med Ubuntu 7.1
Själv skulle jag prova att köra en gång i felsäkert läge (tryck på ESC när GRUBmenyn dyker upp och välj (recovery mode)) så du får reda på vad datorn stannar på.
Andra problemet tyder på strul med ACPI (som en P2-dator stödjer nog inte).
Andra problemet tyder på strul med ACPI (som en P2-dator stödjer nog inte).
Re: Startproblem med Ubuntu 7.1
Hej, här kommer ett livstecken efter mycket om och men. När jag startar i recovery mode så stannar datorn på root@ubuntu: ~#
N-E
N-E
-
mcNisse
- Inlägg: 5211
- Blev medlem: 06 feb 2007, 20:51
- OS: Debian
- Utgåva: Vet inte/ingen utgåva passar
Re: Startproblem med Ubuntu 7.1
Det är helt korrekt...
Nu kan du titta i loggar, som ligger under /var/log.
Här har du en enkel kommando lista:
cd (change directory
ls lista filer
less lista innehållet i en fil
dmesg ge en lista på meddelanden ur loggar dmesg | less
Nu kan du titta i loggar, som ligger under /var/log.
Här har du en enkel kommando lista:
cd (change directory
ls lista filer
less lista innehållet i en fil
dmesg ge en lista på meddelanden ur loggar dmesg | less
Re: Startproblem med Ubuntu 7.1
Fick följande när jag skrev in dmesg. För mig är det latin 
N-E
per@ubuntu:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000040fdc00 (usable)
[ 0.000000] BIOS-e820: 00000000040fdc00 - 00000000040ff800 (ACPI data)
[ 0.000000] BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000040ffc00 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 00000000fffe7000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 512MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131072) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131072
[ 0.000000] HighMem 131072 -> 131072
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131072
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125984 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.1 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6AC0 checksum 0
[ 0.000000] ACPI: RSDP 000F6AC0, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 040FDD77, 0028 (r1 PTLTD RSDT 0 PTL 1000000)
[ 0.000000] ACPI: FACP 040FF78C, 0074 (r1 DELL KHAN 19990503 PTL F4240)
[ 0.000000] ACPI: DSDT 040FDD9F, 19ED (r1 Dell Khan 0 MSFT 1000004)
[ 0.000000] ACPI: FACS 040FFBC0, 0040
[ 0.000000] ACPI: BIOS age (1999) fails cutoff (2000), acpi=force is required to enable ACPI
[ 0.000000] ACPI: Disabling ACPI support
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dffe7000)
[ 0.000000] Built 1 zonelists. Total pages: 130048
[ 0.000000] Kernel command line: root=UUID=b93cfb97-1558-4ac7-a70d-13d538de12ca ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (0140d000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 398.277 MHz processor.
[ 68.521662] Console: colour VGA+ 80x25
[ 68.522992] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 68.524309] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 68.605636] Memory: 508300k/524288k available (2015k kernel code, 15436k reserved, 915k data, 364k init, 0k highmem)
[ 68.605688] virtual kernel memory layout:
[ 68.605694] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 68.605702] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 68.605710] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 68.605717] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 68.605725] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 68.605732] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 68.605739] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 68.605756] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 68.605919] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 68.685965] Calibrating delay using timer specific routine.. 797.55 BogoMIPS (lpj=1595119)
[ 68.686081] Security Framework v1.0.0 initialized
[ 68.686115] SELinux: Disabled at boot.
[ 68.686189] Mount-cache hash table entries: 512
[ 68.686727] CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 68.686778] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 68.686792] CPU: L2 cache: 512K
[ 68.686806] CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 68.686856] Compat vDSO mapped to ffffe000.
[ 68.686909] Checking 'hlt' instruction... OK.
[ 68.702077] SMP alternatives: switching to UP code
[ 68.702770] Freeing SMP alternatives: 11k freed
[ 68.703957] Early unpacking initramfs... done
[ 70.306397] CPU0: Intel Pentium II (Deschutes) stepping 02
[ 70.306425] SMP motherboard not detected.
[ 70.306437] Local APIC not detected. Using dummy APIC emulation.
[ 70.306637] Brought up 1 CPUs
[ 70.307193] Booting paravirtualized kernel on bare hardware
[ 70.307382] Time: 8:25:38 Date: 02/08/108
[ 70.307502] NET: Registered protocol family 16
[ 70.307938] EISA bus registered
[ 70.308736] PCI: PCI BIOS revision 2.10 entry at 0xfd9a3, last bus=1
[ 70.308749] PCI: Using configuration type 1
[ 70.308759] Setting up standard PCI resources
[ 70.318580] ACPI: Interpreter disabled.
[ 70.318599] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 70.318641] pnp: PnP ACPI: disabled
[ 70.318657] PnPBIOS: Scanning system for PnP BIOS support...
[ 70.318715] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6ae0
[ 70.318732] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9f5d, dseg 0x400
[ 70.327618] PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
[ 70.327893] PCI: Probing PCI hardware
[ 70.327974] PCI: Probing PCI hardware (bus 00)
[ 70.328555] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 70.328565] * this clock source is slow. Consider trying other clock sources
[ 70.328639] PCI quirk: region 8000-803f claimed by PIIX4 ACPI
[ 70.328654] PCI quirk: region 7000-700f claimed by PIIX4 SMB
[ 70.331647] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
[ 70.333648] NET: Registered protocol family 8
[ 70.333661] NET: Registered protocol family 20
[ 70.333959] pnp: 00:00: iomem range 0xe0000-0xe3fff has been reserved
[ 70.333986] Time: tsc clocksource has been installed.
[ 70.334130] pnp: 00:01: ioport range 0x370-0x371 has been reserved
[ 70.334151] pnp: 00:01: iomem range 0xfffc0000-0xffffffff could not be reserved
[ 70.334182] pnp: 00:02: iomem range 0x0-0x9ffff could not be reserved
[ 70.334198] pnp: 00:02: iomem range 0xe4000-0xfffff could not be reserved
[ 70.334215] pnp: 00:02: iomem range 0x100000-0x1fffffff could not be reserved
[ 70.334231] pnp: 00:02: iomem range 0xfff80000-0xfffbffff has been reserved
[ 70.334275] pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 70.334291] pnp: 00:0b: ioport range 0x8000-0x803f has been reserved
[ 70.334306] pnp: 00:0b: ioport range 0x7000-0x700f has been reserved
[ 70.336252] PCI: Bridge: 0000:00:01.0
[ 70.336267] IO window: 9000-9fff
[ 70.336283] MEM window: f4100000-f5ffffff
[ 70.336297] PREFETCH window: 30000000-300fffff
[ 70.336363] NET: Registered protocol family 2
[ 70.374200] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 70.374611] TCP established hash table entries: 65536 (order: 7, 786432 bytes)
[ 70.378482] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 70.381407] TCP: Hash tables configured (established 65536 bind 65536)
[ 70.381422] TCP reno registered
[ 70.390616] checking if image is initramfs... it is
[ 73.456257] Freeing initrd memory: 7056k freed
[ 73.457661] audit: initializing netlink socket (disabled)
[ 73.457717] audit(1204964740.732:1): initialized
[ 73.471171] VFS: Disk quotas dquot_6.5.1
[ 73.471521] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 73.472334] io scheduler noop registered
[ 73.472349] io scheduler anticipatory registered
[ 73.472360] io scheduler deadline registered
[ 73.472489] io scheduler cfq registered (default)
[ 73.472530] Limiting direct PCI/PCI transfers.
[ 73.472594] Boot video device is 0000:01:00.0
[ 73.473242] isapnp: Scanning for PnP cards...
[ 73.827846] isapnp: No Plug & Play device found
[ 73.999780] Real Time Clock Driver v1.12ac
[ 74.000180] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 74.000389] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 74.001401] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 74.003867] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 74.008179] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 74.008890] input: Macintosh mouse button emulation as /class/input/input0
[ 74.009366] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 74.012117] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 74.012142] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 74.013137] mice: PS/2 mouse device common for all mice
[ 74.013773] EISA: Probing bus 0 at eisa.0
[ 74.013808] Cannot allocate resource for EISA slot 1
[ 74.013858] Cannot allocate resource for EISA slot 7
[ 74.013870] Cannot allocate resource for EISA slot 8
[ 74.013880] EISA: Detected 0 cards.
[ 74.014476] TCP cubic registered
[ 74.014569] NET: Registered protocol family 1
[ 74.014690] Using IPI No-Shortcut mode
[ 74.015035] Magic number: 0:801:421
[ 74.016975] Freeing unused kernel memory: 364k freed
[ 74.070208] input: AT Translated Set 2 keyboard as /class/input/input1
[ 76.111296] AppArmor: AppArmor initialized<5>audit(1204964743.232:2): type=1505 info="AppArmor initialized" pid=1121
[ 76.160782] fuse init (API version 7.
[ 76.187828] Failure registering capabilities with primary security module.
[ 76.290656] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 78.766379] SCSI subsystem initialized
[ 78.825867] libata version 2.21 loaded.
[ 78.857186] ata_piix 0000:00:07.1: version 2.11
[ 78.857846] scsi0 : ata_piix
[ 78.858110] scsi1 : ata_piix
[ 78.858268] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011000 irq 14
[ 78.858288] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011008 irq 15
[ 78.942015] usbcore: registered new interface driver usbfs
[ 78.942164] usbcore: registered new interface driver hub
[ 78.942301] usbcore: registered new device driver usb
[ 78.950331] USB Universal Host Controller Interface driver v3.0
[ 79.178287] ata1.00: ATAPI: CD-ROM CDU701, 1.0f, max MWDMA2
[ 79.350311] ata1.00: configured for MWDMA2
[ 79.551179] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 79.678499] ata2.00: ATA-4: Maxtor 91296D6, GAS54112, max UDMA/33
[ 79.678521] ata2.00: 25313904 sectors, multi 16: LBA
[ 79.678552] ata2.01: ATAPI: SAMSUNG CD-R/RW DRIVE SW-212B, V:00BS04, max MWDMA2
[ 79.694579] ata2.00: configured for UDMA/33
[ 79.866386] ata2.01: configured for MWDMA2
[ 79.867859] scsi 0:0:0:0: CD-ROM SONY CD-ROM CDU701 1.0f PQ: 0 ANSI: 5
[ 79.874231] scsi 1:0:0:0: Direct-Access ATA Maxtor 91296D6 GAS5 PQ: 0 ANSI: 5
[ 79.875200] scsi 1:0:1:0: CD-ROM SAMSUNG CD-R/RW SW-212B BS04 PQ: 0 ANSI: 5
[ 79.875895] PCI: setting IRQ 9 as level-triggered
[ 79.875911] PCI: Found IRQ 9 for device 0000:00:07.2
[ 79.875968] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 79.876361] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 79.876434] uhci_hcd 0000:00:07.2: irq 9, io base 0x00001020
[ 79.877059] usb usb1: configuration #1 chosen from 1 choice
[ 79.877210] hub 1-0:1.0: USB hub found
[ 79.877258] hub 1-0:1.0: 2 ports detected
[ 79.979405] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 79.979428] 8139cp 0000:00:0f.0: Try the "8139too" driver instead.
[ 79.993340] 8139too Fast Ethernet driver 0.9.28
[ 79.993479] PCI: Enabling device 0000:00:0f.0 (0104 -> 0107)
[ 79.993502] PCI: setting IRQ 10 as level-triggered
[ 79.993515] PCI: Found IRQ 10 for device 0000:00:0f.0
[ 79.994114] eth0: RealTek RTL8139 at 0xe080e000, 00:e0:4c:11:26:c3, IRQ 10
[ 79.994129] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 80.113372] Floppy drive(s): fd0 is 1.44M
[ 80.147996] FDC 0 is a post-1991 82077
[ 80.218143] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 80.237687] sr0: scsi3-mmc drive: 14x/14x cd/rw xa/form2 cdda tray
[ 80.237709] Uniform CD-ROM driver Revision: 3.20
[ 80.237918] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 80.250728] sd 1:0:0:0: [sda] 25313904 512-byte hardware sectors (12961 MB)
[ 80.288800] sd 1:0:0:0: [sda] Write Protect is off
[ 80.288824] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 80.328823] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 80.339698] sr1: scsi3-mmc drive: 8x/32x writer cd/rw xa/form2 cdda tray
[ 80.340600] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 80.375622] sd 1:0:0:0: [sda] 25313904 512-byte hardware sectors (12961 MB)
[ 80.377534] sd 1:0:0:0: [sda] Write Protect is off
[ 80.377553] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 80.378416] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 80.378446] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 80.403198] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 80.403944] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 80.414174] sda1 sda2 <<6>usb 1-1: configuration #1 chosen from 1 choice
[ 80.477684] sda5 >
[ 80.480996] sd 1:0:0:0: [sda] Attached SCSI disk
[ 80.662115] usb 1-2: new low speed USB device using uhci_hcd and address 3
[ 80.836795] usb 1-2: configuration #1 chosen from 1 choice
[ 80.936120] usbcore: registered new interface driver hiddev
[ 80.960934] input: Logitech USB Receiver as /class/input/input2
[ 80.961664] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:07.2-2
[ 80.961732] usbcore: registered new interface driver usbhid
[ 80.961750] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 81.456218] Attempting manual resume
[ 81.456236] swsusp: Resume From Partition 8:5
[ 81.456246] PM: Checking swsusp image.
[ 81.477087] PM: Resume from disk failed.
[ 81.607398] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 81.607418] EXT3-fs: write access will be enabled during recovery.
[ 84.299883] kjournald starting. Commit interval 5 seconds
[ 84.299940] EXT3-fs: recovery complete.
[ 84.301425] EXT3-fs: mounted filesystem with ordered data mode.
[ 104.215007] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 106.470444] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 106.821585] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 107.016146] Linux agpgart interface v0.102 (c) Dave Jones
[ 107.043482] agpgart: Detected an Intel 440BX Chipset.
[ 107.050864] agpgart: AGP aperture is 64M @ 0xf8000000
[ 108.590536] input: PC Speaker as /class/input/input3
[ 110.142314] pnp: Device 00:11 activated.
[ 110.142337] parport_pc 00:11: reported by Plug and Play BIOS
[ 110.142384] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 110.534070] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1904
[ 110.534157] usbcore: registered new interface driver usblp
[ 110.534175] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 111.486765] PCI: Enabling device 0000:00:0e.0 (0104 -> 0107)
[ 111.486792] PCI: setting IRQ 11 as level-triggered
[ 111.486806] PCI: Found IRQ 11 for device 0000:00:0e.0
[ 111.486934] Vortex: init.... <6>done.
[ 112.249406] gameport: AU88x0 Gameport is pci0000:00:0e.0/gameport0, speed 1657kHz
[ 113.406907] loop: module loaded
[ 113.498232] lp0: using parport0 (interrupt-driven).
[ 113.727324] Adding 578300k swap on /dev/sda5. Priority:-1 extents:1 across:578300k
[ 114.286242] EXT3 FS on sda1, internal journal
[ 118.383714] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[ 118.384158] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
[ 118.385458] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
[ 118.386059] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[ 122.232188] ppdev: user-space parallel port driver
[ 122.321303] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 123.028864] audit(1204964790.731:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4270 profile="/usr/sbin/cupsd"
[ 123.200691] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 129.516010] Failure registering capabilities with primary security module.
[ 130.127611] Bluetooth: Core ver 2.11
[ 130.128120] NET: Registered protocol family 31
[ 130.128136] Bluetooth: HCI device and connection manager initialized
[ 130.128152] Bluetooth: HCI socket layer initialized
[ 130.226043] Bluetooth: L2CAP ver 2.8
[ 130.226063] Bluetooth: L2CAP socket layer initialized
[ 130.317371] Bluetooth: RFCOMM socket layer initialized
[ 130.317828] Bluetooth: RFCOMM TTY layer initialized
[ 130.317844] Bluetooth: RFCOMM ver 1.8
[ 135.243060] NET: Registered protocol family 17
[ 137.320721] NET: Registered protocol family 10
[
N-E
per@ubuntu:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000040fdc00 (usable)
[ 0.000000] BIOS-e820: 00000000040fdc00 - 00000000040ff800 (ACPI data)
[ 0.000000] BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000040ffc00 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 00000000fffe7000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 512MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131072) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131072
[ 0.000000] HighMem 131072 -> 131072
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131072
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125984 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.1 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6AC0 checksum 0
[ 0.000000] ACPI: RSDP 000F6AC0, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 040FDD77, 0028 (r1 PTLTD RSDT 0 PTL 1000000)
[ 0.000000] ACPI: FACP 040FF78C, 0074 (r1 DELL KHAN 19990503 PTL F4240)
[ 0.000000] ACPI: DSDT 040FDD9F, 19ED (r1 Dell Khan 0 MSFT 1000004)
[ 0.000000] ACPI: FACS 040FFBC0, 0040
[ 0.000000] ACPI: BIOS age (1999) fails cutoff (2000), acpi=force is required to enable ACPI
[ 0.000000] ACPI: Disabling ACPI support
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dffe7000)
[ 0.000000] Built 1 zonelists. Total pages: 130048
[ 0.000000] Kernel command line: root=UUID=b93cfb97-1558-4ac7-a70d-13d538de12ca ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (0140d000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 398.277 MHz processor.
[ 68.521662] Console: colour VGA+ 80x25
[ 68.522992] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 68.524309] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 68.605636] Memory: 508300k/524288k available (2015k kernel code, 15436k reserved, 915k data, 364k init, 0k highmem)
[ 68.605688] virtual kernel memory layout:
[ 68.605694] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 68.605702] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 68.605710] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 68.605717] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 68.605725] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 68.605732] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 68.605739] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 68.605756] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 68.605919] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 68.685965] Calibrating delay using timer specific routine.. 797.55 BogoMIPS (lpj=1595119)
[ 68.686081] Security Framework v1.0.0 initialized
[ 68.686115] SELinux: Disabled at boot.
[ 68.686189] Mount-cache hash table entries: 512
[ 68.686727] CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 68.686778] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 68.686792] CPU: L2 cache: 512K
[ 68.686806] CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 68.686856] Compat vDSO mapped to ffffe000.
[ 68.686909] Checking 'hlt' instruction... OK.
[ 68.702077] SMP alternatives: switching to UP code
[ 68.702770] Freeing SMP alternatives: 11k freed
[ 68.703957] Early unpacking initramfs... done
[ 70.306397] CPU0: Intel Pentium II (Deschutes) stepping 02
[ 70.306425] SMP motherboard not detected.
[ 70.306437] Local APIC not detected. Using dummy APIC emulation.
[ 70.306637] Brought up 1 CPUs
[ 70.307193] Booting paravirtualized kernel on bare hardware
[ 70.307382] Time: 8:25:38 Date: 02/08/108
[ 70.307502] NET: Registered protocol family 16
[ 70.307938] EISA bus registered
[ 70.308736] PCI: PCI BIOS revision 2.10 entry at 0xfd9a3, last bus=1
[ 70.308749] PCI: Using configuration type 1
[ 70.308759] Setting up standard PCI resources
[ 70.318580] ACPI: Interpreter disabled.
[ 70.318599] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 70.318641] pnp: PnP ACPI: disabled
[ 70.318657] PnPBIOS: Scanning system for PnP BIOS support...
[ 70.318715] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6ae0
[ 70.318732] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9f5d, dseg 0x400
[ 70.327618] PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
[ 70.327893] PCI: Probing PCI hardware
[ 70.327974] PCI: Probing PCI hardware (bus 00)
[ 70.328555] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 70.328565] * this clock source is slow. Consider trying other clock sources
[ 70.328639] PCI quirk: region 8000-803f claimed by PIIX4 ACPI
[ 70.328654] PCI quirk: region 7000-700f claimed by PIIX4 SMB
[ 70.331647] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
[ 70.333648] NET: Registered protocol family 8
[ 70.333661] NET: Registered protocol family 20
[ 70.333959] pnp: 00:00: iomem range 0xe0000-0xe3fff has been reserved
[ 70.333986] Time: tsc clocksource has been installed.
[ 70.334130] pnp: 00:01: ioport range 0x370-0x371 has been reserved
[ 70.334151] pnp: 00:01: iomem range 0xfffc0000-0xffffffff could not be reserved
[ 70.334182] pnp: 00:02: iomem range 0x0-0x9ffff could not be reserved
[ 70.334198] pnp: 00:02: iomem range 0xe4000-0xfffff could not be reserved
[ 70.334215] pnp: 00:02: iomem range 0x100000-0x1fffffff could not be reserved
[ 70.334231] pnp: 00:02: iomem range 0xfff80000-0xfffbffff has been reserved
[ 70.334275] pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 70.334291] pnp: 00:0b: ioport range 0x8000-0x803f has been reserved
[ 70.334306] pnp: 00:0b: ioport range 0x7000-0x700f has been reserved
[ 70.336252] PCI: Bridge: 0000:00:01.0
[ 70.336267] IO window: 9000-9fff
[ 70.336283] MEM window: f4100000-f5ffffff
[ 70.336297] PREFETCH window: 30000000-300fffff
[ 70.336363] NET: Registered protocol family 2
[ 70.374200] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 70.374611] TCP established hash table entries: 65536 (order: 7, 786432 bytes)
[ 70.378482] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 70.381407] TCP: Hash tables configured (established 65536 bind 65536)
[ 70.381422] TCP reno registered
[ 70.390616] checking if image is initramfs... it is
[ 73.456257] Freeing initrd memory: 7056k freed
[ 73.457661] audit: initializing netlink socket (disabled)
[ 73.457717] audit(1204964740.732:1): initialized
[ 73.471171] VFS: Disk quotas dquot_6.5.1
[ 73.471521] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 73.472334] io scheduler noop registered
[ 73.472349] io scheduler anticipatory registered
[ 73.472360] io scheduler deadline registered
[ 73.472489] io scheduler cfq registered (default)
[ 73.472530] Limiting direct PCI/PCI transfers.
[ 73.472594] Boot video device is 0000:01:00.0
[ 73.473242] isapnp: Scanning for PnP cards...
[ 73.827846] isapnp: No Plug & Play device found
[ 73.999780] Real Time Clock Driver v1.12ac
[ 74.000180] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 74.000389] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 74.001401] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 74.003867] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 74.008179] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 74.008890] input: Macintosh mouse button emulation as /class/input/input0
[ 74.009366] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 74.012117] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 74.012142] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 74.013137] mice: PS/2 mouse device common for all mice
[ 74.013773] EISA: Probing bus 0 at eisa.0
[ 74.013808] Cannot allocate resource for EISA slot 1
[ 74.013858] Cannot allocate resource for EISA slot 7
[ 74.013870] Cannot allocate resource for EISA slot 8
[ 74.013880] EISA: Detected 0 cards.
[ 74.014476] TCP cubic registered
[ 74.014569] NET: Registered protocol family 1
[ 74.014690] Using IPI No-Shortcut mode
[ 74.015035] Magic number: 0:801:421
[ 74.016975] Freeing unused kernel memory: 364k freed
[ 74.070208] input: AT Translated Set 2 keyboard as /class/input/input1
[ 76.111296] AppArmor: AppArmor initialized<5>audit(1204964743.232:2): type=1505 info="AppArmor initialized" pid=1121
[ 76.160782] fuse init (API version 7.
[ 76.187828] Failure registering capabilities with primary security module.
[ 76.290656] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 78.766379] SCSI subsystem initialized
[ 78.825867] libata version 2.21 loaded.
[ 78.857186] ata_piix 0000:00:07.1: version 2.11
[ 78.857846] scsi0 : ata_piix
[ 78.858110] scsi1 : ata_piix
[ 78.858268] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011000 irq 14
[ 78.858288] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011008 irq 15
[ 78.942015] usbcore: registered new interface driver usbfs
[ 78.942164] usbcore: registered new interface driver hub
[ 78.942301] usbcore: registered new device driver usb
[ 78.950331] USB Universal Host Controller Interface driver v3.0
[ 79.178287] ata1.00: ATAPI: CD-ROM CDU701, 1.0f, max MWDMA2
[ 79.350311] ata1.00: configured for MWDMA2
[ 79.551179] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 79.678499] ata2.00: ATA-4: Maxtor 91296D6, GAS54112, max UDMA/33
[ 79.678521] ata2.00: 25313904 sectors, multi 16: LBA
[ 79.678552] ata2.01: ATAPI: SAMSUNG CD-R/RW DRIVE SW-212B, V:00BS04, max MWDMA2
[ 79.694579] ata2.00: configured for UDMA/33
[ 79.866386] ata2.01: configured for MWDMA2
[ 79.867859] scsi 0:0:0:0: CD-ROM SONY CD-ROM CDU701 1.0f PQ: 0 ANSI: 5
[ 79.874231] scsi 1:0:0:0: Direct-Access ATA Maxtor 91296D6 GAS5 PQ: 0 ANSI: 5
[ 79.875200] scsi 1:0:1:0: CD-ROM SAMSUNG CD-R/RW SW-212B BS04 PQ: 0 ANSI: 5
[ 79.875895] PCI: setting IRQ 9 as level-triggered
[ 79.875911] PCI: Found IRQ 9 for device 0000:00:07.2
[ 79.875968] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 79.876361] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 79.876434] uhci_hcd 0000:00:07.2: irq 9, io base 0x00001020
[ 79.877059] usb usb1: configuration #1 chosen from 1 choice
[ 79.877210] hub 1-0:1.0: USB hub found
[ 79.877258] hub 1-0:1.0: 2 ports detected
[ 79.979405] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 79.979428] 8139cp 0000:00:0f.0: Try the "8139too" driver instead.
[ 79.993340] 8139too Fast Ethernet driver 0.9.28
[ 79.993479] PCI: Enabling device 0000:00:0f.0 (0104 -> 0107)
[ 79.993502] PCI: setting IRQ 10 as level-triggered
[ 79.993515] PCI: Found IRQ 10 for device 0000:00:0f.0
[ 79.994114] eth0: RealTek RTL8139 at 0xe080e000, 00:e0:4c:11:26:c3, IRQ 10
[ 79.994129] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 80.113372] Floppy drive(s): fd0 is 1.44M
[ 80.147996] FDC 0 is a post-1991 82077
[ 80.218143] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 80.237687] sr0: scsi3-mmc drive: 14x/14x cd/rw xa/form2 cdda tray
[ 80.237709] Uniform CD-ROM driver Revision: 3.20
[ 80.237918] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 80.250728] sd 1:0:0:0: [sda] 25313904 512-byte hardware sectors (12961 MB)
[ 80.288800] sd 1:0:0:0: [sda] Write Protect is off
[ 80.288824] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 80.328823] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 80.339698] sr1: scsi3-mmc drive: 8x/32x writer cd/rw xa/form2 cdda tray
[ 80.340600] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 80.375622] sd 1:0:0:0: [sda] 25313904 512-byte hardware sectors (12961 MB)
[ 80.377534] sd 1:0:0:0: [sda] Write Protect is off
[ 80.377553] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 80.378416] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 80.378446] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 80.403198] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 80.403944] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 80.414174] sda1 sda2 <<6>usb 1-1: configuration #1 chosen from 1 choice
[ 80.477684] sda5 >
[ 80.480996] sd 1:0:0:0: [sda] Attached SCSI disk
[ 80.662115] usb 1-2: new low speed USB device using uhci_hcd and address 3
[ 80.836795] usb 1-2: configuration #1 chosen from 1 choice
[ 80.936120] usbcore: registered new interface driver hiddev
[ 80.960934] input: Logitech USB Receiver as /class/input/input2
[ 80.961664] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:07.2-2
[ 80.961732] usbcore: registered new interface driver usbhid
[ 80.961750] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 81.456218] Attempting manual resume
[ 81.456236] swsusp: Resume From Partition 8:5
[ 81.456246] PM: Checking swsusp image.
[ 81.477087] PM: Resume from disk failed.
[ 81.607398] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 81.607418] EXT3-fs: write access will be enabled during recovery.
[ 84.299883] kjournald starting. Commit interval 5 seconds
[ 84.299940] EXT3-fs: recovery complete.
[ 84.301425] EXT3-fs: mounted filesystem with ordered data mode.
[ 104.215007] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 106.470444] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 106.821585] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 107.016146] Linux agpgart interface v0.102 (c) Dave Jones
[ 107.043482] agpgart: Detected an Intel 440BX Chipset.
[ 107.050864] agpgart: AGP aperture is 64M @ 0xf8000000
[ 108.590536] input: PC Speaker as /class/input/input3
[ 110.142314] pnp: Device 00:11 activated.
[ 110.142337] parport_pc 00:11: reported by Plug and Play BIOS
[ 110.142384] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 110.534070] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1904
[ 110.534157] usbcore: registered new interface driver usblp
[ 110.534175] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 111.486765] PCI: Enabling device 0000:00:0e.0 (0104 -> 0107)
[ 111.486792] PCI: setting IRQ 11 as level-triggered
[ 111.486806] PCI: Found IRQ 11 for device 0000:00:0e.0
[ 111.486934] Vortex: init.... <6>done.
[ 112.249406] gameport: AU88x0 Gameport is pci0000:00:0e.0/gameport0, speed 1657kHz
[ 113.406907] loop: module loaded
[ 113.498232] lp0: using parport0 (interrupt-driven).
[ 113.727324] Adding 578300k swap on /dev/sda5. Priority:-1 extents:1 across:578300k
[ 114.286242] EXT3 FS on sda1, internal journal
[ 118.383714] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[ 118.384158] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
[ 118.385458] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
[ 118.386059] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[ 122.232188] ppdev: user-space parallel port driver
[ 122.321303] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 123.028864] audit(1204964790.731:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4270 profile="/usr/sbin/cupsd"
[ 123.200691] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 129.516010] Failure registering capabilities with primary security module.
[ 130.127611] Bluetooth: Core ver 2.11
[ 130.128120] NET: Registered protocol family 31
[ 130.128136] Bluetooth: HCI device and connection manager initialized
[ 130.128152] Bluetooth: HCI socket layer initialized
[ 130.226043] Bluetooth: L2CAP ver 2.8
[ 130.226063] Bluetooth: L2CAP socket layer initialized
[ 130.317371] Bluetooth: RFCOMM socket layer initialized
[ 130.317828] Bluetooth: RFCOMM TTY layer initialized
[ 130.317844] Bluetooth: RFCOMM ver 1.8
[ 135.243060] NET: Registered protocol family 17
[ 137.320721] NET: Registered protocol family 10
[