Efter uppgradering till 6.10 har synkroniseringen mellan min palm och evolution slutat fungera. Ett tryck på synkknappen på min palm resulterar i omedelbar omboot av min palm (treo650).
Någon som upplevt detsamma och har hittat botemedel ?
gpilot
gpilot
Hittade följande i engelska forumet som faktiskt hjälpte! Jag är nu lycklig användare av synkad evolution/Treo 650 igen.
Tack Blackneto
Thought i'd write this up for anyone that might be having difficulties.
I coulnd't get the sync to work no matter what I tried.
I'll list the changes i made that helped get this solved.
1. make sure /usr/share/gnome-pilot/devices.xml
has the following entry:
<device vendor_id="0830" product_id="0061" />
2. make sure when you run the gpilot wizard from Evolution you use /dev/ttyUSB1. set speed to 115200, set the timeout to 40, set the type to USB.
I believe that theres some udev settings you can use if you want to use the symling /dev/pilot.
3. On the first sync set the conduits to copy from whiever has the most data, computer or device.
Tack Blackneto
Thought i'd write this up for anyone that might be having difficulties.
I coulnd't get the sync to work no matter what I tried.
I'll list the changes i made that helped get this solved.
1. make sure /usr/share/gnome-pilot/devices.xml
has the following entry:
<device vendor_id="0830" product_id="0061" />
2. make sure when you run the gpilot wizard from Evolution you use /dev/ttyUSB1. set speed to 115200, set the timeout to 40, set the type to USB.
I believe that theres some udev settings you can use if you want to use the symling /dev/pilot.
3. On the first sync set the conduits to copy from whiever has the most data, computer or device.