Installera ATI drivrutiner (öppna + stängda)

[flierman]

Okej steg 1 klart, installerade drivisarna från din länk:

Inga felsvar vad jag kunde se men det verkar vara problem ändå eftersom när jag slår fglrxinfo visar det detta:

The program 'fglrxinfo' is currently not installed.  You can install it by typing:
sudo apt-get install xorg-driver-fglrx
Make sure you have the 'restricted' component enabled
bash: fglrxinfo: command not found
mike@mike-laptop:~$

Jag gjorde inte "Pre-Installation Checks" innan såg jag nu, är det problemet? Ska jag göra dessa och sen köra installationen igen innan jag kör in Xgl?

[TForsman]

Börja göra backup på Xorg:
http://ubuntu-se.org/mediawiki/index.php/XorgBackup


Installera 8.40.4 Drivrutin manuellt
Ta hem ATI drivrutiner: ati-driver-installer-8.40.4-x86.x86_64.run (den här installationen är för 32bit och 64bit systems).
Lägg filen i din Hemmapp i datorn.

Först göra filen körvänlig:

Kod: Markera allt

chmod a+x ati-driver-installer-8.40.4-x86.x86_64.run

Sen börja installera den:

Kod: Markera allt

sudo bash ./ati-driver-installer-8.40.4-x86.x86_64.run

Och följ anvisningarna på skärmen.

Sen när det är klart, gör detta i terminalen:

Kod: Markera allt

sudo gedit /etc/X11/xorg.conf

ändra det som säger:
Drivers "ati"
till
Drivers "fglrx"

Sen starta om datan.

Sen skriv i terminalen:

Kod: Markera allt

fglrxinfo

och ge oss här inne vad du får för svar.


Denna kanske är lättare 

[flierman]

Okej...so far so good,,

Körde sen: sudo aticonfig --initial --force

Fick detta svar:

mike@mike-laptop:~$ sudo aticonfig --initial --force
Uninitialised file found, configuring.
Using /etc/X11/xorg.conf
Saved back-up to /etc/X11/xorg.conf.original-0
mike@mike-laptop:~$

Startade om, allt väl. En icon i högra hörnet som sa något om att jag kör restricted drivers, en ikon som ser ut som ett nätverkskort..grön.

Ser bra ut nu med fglrxinfo: 

display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI MOBILITY RADEON X600
OpenGL version string: 2.0.6747 (8.40.4)

And now?

[TForsman]

http://www.ubuntu-se.org/drupal/node/253
scrolla ner till: Nu ska vi installera XGL

Efter den är installerad, starta om och Välj session vid login sidan....då väljer du "gnome with glx"
Sen logga in, funkar det så är det bara att börja pumpa in Compiz fusion eller liknande 

[flierman]

Loggade in med Gnome+glx...mega grafikfel på hela skärmen...damn..nästan hela vägen...något jag kan göra?

Kör upplösning 1200x800 på laptop

I Ati center verkar allt vara okej som jag kan se. Den hittar X600 med rätt grejor.

fglrxinfo visar detta nu:

Xlib:  extension "XFree86-DRI" missing on display ":0.0".
display: :0.0  screen: 0
OpenGL vendor string: Mesa project: <a class="postlink" href="http://www.mesa3d.org">http://www.mesa3d.org</a>
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (1.5 Mesa 6.5.2)

[TForsman]

Kod: Markera allt

sudo apt-get install xserver-xgl

du körde den?

och du fortsatte inte med:
Ändra tillbaka Xorg filen.

För då tog du bort allt 

[flierman]

Körde allt från:

sudo apt-get install xserver-xgl  till  sudo chmod a+x /usr/share/xsessions/xgl.desktop

Inte den där nedanför. Allt funkar bra om jag kör i vanlig session.

[TForsman]

logga in med Gnome bara, hur ser

Kod: Markera allt

fglrxinfo

ut?

[flierman]

Xlib:  extension "XFree86-DRI" missing on display ":0.0".
display: :0.0  screen: 0
OpenGL vendor string: Mesa project: <a class="postlink" href="http://www.mesa3d.org">http://www.mesa3d.org</a>
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (1.5 Mesa 6.5.2)

Verkar vara något med skärmen?

[TForsman]

Nånting har blivit knas....detta i terminalen:

Kod: Markera allt

sudo gedit /etc/X11/xorg.conf

kopiera allt och skriv till mig, så får jag kika på den.

[flierman]

Here you go, tack för att du tar dig tid....datorn har ju iallafall inte kraschat som tidigare, alltid något :-)

Ska tömma tvätt-eländet så ta den tid du behöver...BRB 


# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#  sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier    "Default Layout"
Screen      0  "aticonfig-Screen[0]" 0 0
InputDevice    "Generic Keyboard"
InputDevice    "Configured Mouse"
InputDevice    "stylus" "SendCoreEvents"
InputDevice    "cursor" "SendCoreEvents"
InputDevice    "eraser" "SendCoreEvents"
InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"

# path to defoma fonts
FontPath    "/usr/share/fonts/X11/misc"
FontPath    "/usr/share/fonts/X11/cyrillic"
FontPath    "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath    "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath    "/usr/share/fonts/X11/Type1"
FontPath    "/usr/share/fonts/X11/100dpi"
FontPath    "/usr/share/fonts/X11/75dpi"
FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load  "i2c"
Load  "bitmap"
Load  "ddc"
Load  "dri"
Load  "extmod"
Load  "freetype"
Load  "glx"
Load  "int10"
Load  "vbe"
EndSection

Section "InputDevice"
Identifier  "Generic Keyboard"
Driver      "kbd"
Option     "CoreKeyboard"
Option     "XkbRules" "xorg"
Option     "XkbModel" "pc105"
Option     "XkbLayout" "se"
EndSection

Section "InputDevice"
Identifier  "Configured Mouse"
Driver      "mouse"
Option     "CorePointer"
Option     "Device" "/dev/input/mice"
Option     "Protocol" "ImPS/2"
Option     "ZAxisMapping" "4 5"
Option     "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier  "Synaptics Touchpad"
Driver      "synaptics"
Option     "SendCoreEvents" "true"
Option     "Device" "/dev/psaux"
Option     "Protocol" "auto-dev"
Option     "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
Identifier  "stylus"
Driver      "wacom"
Option     "Device" "/dev/input/wacom"
Option     "Type" "stylus"
Option     "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier  "eraser"
Driver      "wacom"
Option     "Device" "/dev/input/wacom"
Option     "Type" "eraser"
Option     "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier  "cursor"
Driver      "wacom"
Option     "Device" "/dev/input/wacom"
Option     "Type" "cursor"
Option     "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Monitor"
Identifier  "aticonfig-Monitor[0]"
Option     "VendorName" "ATI Proprietary Driver"
Option     "ModelName" "Generic Autodetecting Monitor"
Option     "DPMS" "true"
EndSection

Section "Device"
Identifier  "aticonfig-Device[0]"
Driver      "fglrx"
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]"
Device    "aticonfig-Device[0]"
Monitor    "aticonfig-Monitor[0]"
DefaultDepth    24
SubSection "Display"
Viewport  0 0
Depth    24
EndSubSection
EndSection

Section "DRI"
Mode        0666
EndSection

[TForsman]

kör denna:

Kod: Markera allt

sudo cp /etc/X11/xorg.conf.original-0 /etc/X11/xorg.conf

Sen starta om....och sen ge mig xorg.conf igen 

[flierman]

Here we go:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#  sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "se"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "ATI Technologies Inc M24 1P [Radeon Mobility X600]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc M24 1P [Radeon Mobility X600]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice    "stylus" "SendCoreEvents"
InputDevice    "cursor" "SendCoreEvents"
InputDevice    "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection

Section "DRI"
Mode 0666
EndSection

[TForsman]

byt ut:

Kod: Markera allt

Section "Device"
   Identifier   "ATI Technologies Inc M24 1P [Radeon Mobility X600]"
   Driver      "ati"
   BusID      "PCI:1:0:0"
EndSection

till:

Kod: Markera allt

Section "Device"
   Identifier   "ATI Technologies Inc M24 1P [Radeon Mobility X600]"
   Driver      "fglrx"
   BusID      "PCI:1:0:0"
EndSection

Sen starta om.




Skulle det inte funka. så kan du logga in i tedxtbaserat läge. Där skriver du:

Kod: Markera allt

sudo nano /etc/X11/xorg.conf

byt tillbaka till ati igen.
sen spara filen med ctrl+o  (bokstaven o)
och starta om.....

[flierman]

Wiihaaa...loggade in med gnome-xgl och det var lite sma storningar, nu funkar det nar jag ar inne forutom att svenska vokalerna aer borta >/(

Men jag fick till den nu  åäö  nice

Saa eftersom det funkar i gnome-xgl sa ar det compiz dags daa alltsa_ vill du se nagra instaellningar fraan mig nu?

[TForsman]

Standard att det byter till engelska tangentbord. Man trycker på fel när man får upp en ruta om nån configuration 

men bara byta till svenskt layout igen i system/administration  under tangentbord 

nu är du HET !!

Snart snurrar du kuben som aldrig förr

[flierman]

Ja nu är det nära, kanske inte ens gillar kuben och allt det andra men jag ska fan se det nu efter allt jobb.

Jag har kollat att Compiz 0.3.6 is installed by default in Ubuntu Feisty så det är grönt.

Är detta något att ha? Och vad är universe repository?

You may also install the Compiz-Extra package to get a few plugins not included in Compiz by default (This requires the universe repository to be enabled):

sudo apt-get install compiz-extra

[TForsman]

http://ubuntu-se.org/drupal/Compiz_Fusion

Är nog skojigast att installera.

[flierman]

Ja tusan, såg grymt ut...

Den guiden startar med: Komposit XGL alt AIXGL måste vara aktiverat i likhet med för Beryl

Jag har alltså detta nu? 

[TForsman]

XGL japp   kör på bara